A Regency I2450 wood insert typically costs about $4,000-$5,500 for the appliance, while a complete installation commonly totals $5,500-$9,500. The final price depends on dealer availability, chimney liner condition, hearth and surround work, labor rates, and whether an existing fireplace needs repairs.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| I2450 insert | $4,000 | $4,750 | $5,500 | Appliance price; availability varies |
| Installed project | $5,500 | $7,500 | $9,500 | Typical insert, liner, and standard labor |
| Flexible stainless liner | $800 | $1,200 | $1,800 | Common 20-25 ft system, before some labor |
| Extra masonry or hearth work | $300 | $900 | $2,500 | Depends on repairs and finish scope |
What a Regency I2450 installation usually costs
The I2450 is a medium-size wood-burning insert intended for an existing masonry fireplace. Budget roughly $4,000-$5,500 for the unit and $5,500-$9,500 for a professionally installed project with a stainless-steel liner, standard surround, connection, and startup. A difficult chimney or substantial fireplace repairs can push the total above that range.
Prices are not uniform because the I2450 may be stocked locally, special-ordered, or offered as remaining inventory. Get a written quote that identifies the exact model, included surround and liner, freight, installation, and warranty terms. Assumptions: standard masonry fireplace, 20-25 ft chimney, normal access, and typical U.S. dealer labor. A realistic average installed budget is about $7,500 before unusual repairs.
How the insert, liner, and installation shape the quote
Dealer estimates often bundle components, so buyers should compare the scope rather than just the bottom-line number. The table shows common line-item ranges; a contractor may combine labor and equipment charges or price the liner by height and diameter.
| Quote component | Low | Typical | High |
|---|---|---|---|
| I2450 appliance | $4,000 | $4,750 | $5,500 |
| Stainless chimney liner and cap | $800 | $1,200 | $1,800 |
| Labor, delivery, and setup | $700 | $1,300 | $2,200 |
| Surround, block-off plate, and trim | $250 | $600 | $1,000 |
| Inspection, minor prep, or disposal | $100 | $400 | $900 |
Install labor often represents 8-16 crew-hours at about $75-$150 per worker-hour, though flat-rate pricing is common. Ask whether the estimate includes a full-height liner, chimney cap, block-off plate, and delivery.
Chimney height, firebox dimensions, and repairs change the price
A liner around 20-25 feet may fit a straightforward installation; a chimney over 30 feet can add roughly $300-$900 for extra liner, fittings, and handling. An oversized or unusually shaped flue, poor roof access, or a steep roof can add another $200-$800 in labor or safety costs.
Firebox dimensions also matter. The installer must confirm the insert and surround fit the fireplace opening and that the hearth meets clearance requirements. If the opening needs masonry adjustment, allow $500-$2,000; rebuilding a damaged firebox or smoke chamber can cost more. A chimney needing a new stainless liner rather than a simple connection generally adds $800-$1,800 in materials. Measure the opening and have the chimney inspected before treating an appliance-only quote as a project budget.
Is a short liner job cheaper than a full chimney system?
Some fireplaces appear to need only a short connector, but wood inserts generally require a properly sized liner extending through the chimney to the termination. A complete liner system usually costs more upfront than limited connector work, but it is the appropriate comparison when the existing flue is unlined, oversized, damaged, or incompatible with the insert.
When a sound, correctly sized liner is already present, ask the installer whether it can legally and safely be reused with the I2450. If replacement is needed, compare stainless-steel liner thickness, insulation, cap, and warranty rather than choosing by price alone. A quote that omits liner scope may look cheaper while leaving out a major safety and installation expense.
What three common I2450 quotes might include
A straightforward quote could total about $6,200: a $4,300 insert, $950 liner and cap, and $950 for delivery and a roughly one-day installation. This assumes a 20-foot chimney, clear access, and no masonry work.
A typical project may reach $7,700 with a $4,800 appliance, $1,300 liner system, $1,300 installation, and $300 for a block-off plate or minor prep. A more difficult 32-foot chimney with access complications and firebox repairs could total $10,000-$11,000, including a $5,300 unit, $1,800 liner, $2,000 labor and access charges, and $900-$1,900 in repairs. Compare itemized totals against the same installation scope.
How U.S. location and dealer availability affect pricing
Installed prices in high-cost metro areas and the Northeast may run about 10%-20% above a national-style estimate because of labor, travel, and permitting costs. Rural areas can have lower hourly rates but higher trip or delivery charges, sometimes adding $100-$400. Local chimney access and contractor availability can matter as much as the region.
Because this model may not be equally available at every dealer, remaining-stock prices can vary considerably. Confirm that the quote is for a new, complete I2450 and ask whether freight, parts, and manufacturer warranty coverage are included. Check current local inventory before comparing advertised appliance-only prices with installed quotes.
When scheduling, inspection, and cleanup add fees
A standard installation usually takes one workday, but chimney cleaning, inspection, or masonry repairs may require a separate visit. A chimney inspection and cleaning commonly adds $150-$350; extensive cleaning or access problems can cost more. Old insert removal and disposal may add $150-$500 if they are not included.
Busy heating-season schedules can limit appointment choices, while urgent work may carry a $100-$300 rush or travel charge. Local permit requirements differ, and any applicable permit or inspection fee should be stated separately. Arrange inspection and cleaning early so unexpected flue problems do not delay installation.
Which quote choices can lower the I2450 project total?
Keep the quote focused on required installation work before selecting decorative upgrades. Reuse a compatible surround or hearth component only if the installer confirms fit and code compliance, and avoid paying twice for a chimney inspection or cleaning already completed. Ask whether delivery, disposal, and startup are bundled rather than listed as separate fees.
Request at least two itemized quotes using the same liner length, insulation, cap, and repair assumptions. Scheduling outside the busiest fall and winter period may improve appointment availability, though savings are not guaranteed. Do not reduce cost by skipping a needed full-height liner, required clearances, or chimney repairs. The safest savings usually come from eliminating duplicate services and optional finish work, not cutting essential venting or labor.