A Regency wood stove typically costs about $3,000-$5,500 for the appliance, while a professionally installed stove or insert often totals $4,500-$9,000. Model size, chimney condition, installation type, local labor rates, and required venting determine where a quote lands in that range.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Freestanding Regency stove | $3,000 | $4,200 | $5,500 | Appliance only; model and finish affect price |
| Regency wood insert | $3,500 | $4,800 | $6,500 | Appliance only; liner usually priced separately |
| Installed freestanding stove | $4,500 | $6,500 | $9,000 | Assumes standard venting and accessible site |
| Installed wood insert | $5,500 | $7,500 | $10,500 | Chimney liner and fireplace work affect total |
What Regency stove models cost before installation
Regency’s freestanding wood stoves generally fall between $3,000 and $5,500 before delivery, venting, or labor. Smaller units intended for modest spaces tend to be at the lower end; larger fireboxes and higher-output models can cost more. Wood inserts, designed to fit into existing masonry fireplaces, commonly run $3,500-$6,500 before installation.
For budgeting, use about $4,200 for a mid-size freestanding stove or $4,800 for a typical insert, excluding installation. Prices vary by dealer, finish, included accessories, and regional availability. Assumptions: standard new appliance, U.S. dealer pricing, no unusual shipping or custom finish.
How stove, liner, and labor charges shape the quote
A written estimate should separate the appliance from venting and site work. These typical amounts show how a standard installation can add up; a difficult chimney or a new hearth can exceed the ranges.
| Cost component | Low | Average | High |
|---|---|---|---|
| Stove or insert | $3,000 | $4,500 | $6,500 |
| Chimney pipe or stainless liner | $700 | $1,400 | $2,500 |
| Installation labor | $800 | $1,500 | $2,800 |
| Hearth pad or fireplace preparation | $250 | $700 | $1,500 |
| Delivery and disposal | $100 | $300 | $700 |
For an insert, the liner may be a major part of the total; a freestanding stove may require listed stovepipe and a compatible chimney system instead. Ask whether the quote includes connector pipe, liner insulation, hearth protection, delivery, and final inspection.
Firebox size and heat output that change the price
Choosing capacity by appearance alone can lead to an undersized or oversized stove. As a rough comparison, units rated around 30,000-50,000 BTU per hour often suit smaller or well-insulated spaces, while models around 60,000-80,000 BTU per hour can serve larger areas, depending on layout, insulation, and climate. A larger firebox and higher output generally mean a higher appliance price.
Chimney height and configuration also matter. A straightforward, accessible installation with roughly 15-20 feet of usable chimney can cost less than a tall exterior run, an offset route, or a system needing structural or masonry repairs. Get the installer to match the stove’s output and venting requirements to the home, not just the room’s square footage.
How many labor hours a Regency installation needs
A basic freestanding installation with a suitable existing chimney may take a two-person crew about 4-8 hours. A fireplace insert with a liner commonly takes 6-10 hours. Local rates for qualified hearth installers often run $75-$150 per labor hour, though many companies quote a fixed job price rather than billing each hour.
At 8 crew-hours billed at $100 per hour, labor would be about $800 before any travel, setup, or specialty work. Confirm whether the quoted labor rate is per technician-hour or for the entire crew. Masonry repair, inaccessible roofs, or removal of an old appliance can extend the schedule and raise the charge.
Chimney liners, hearth pads, and other installation add-ons
Common extras include a stainless-steel liner, insulated liner wrap, connector pipe, floor protection, trim, and removal of an existing stove. A liner may cost $700-$2,500 installed, depending on chimney height, diameter, insulation, and access. A listed hearth pad may add $250-$900, while masonry or hearth reconstruction can add $500-$2,500 or more.
Chimney inspection or cleaning may be quoted separately at about $150-$400. Old flue liners, damaged masonry, or a chimney that does not meet the appliance’s requirements can make the work more extensive. Request a site assessment before treating an appliance-only price as a complete installed price.
Why Regency stove quotes vary by U.S. region
Installation costs in high-cost metro areas and regions with limited certified installers can run roughly 10%-25% above a comparable job in a lower-cost market. Rural locations may have lower hourly labor but higher travel, delivery, or scheduling fees. Cold-climate areas can also see longer booking waits during fall and early winter.
These are broad market differences, not fixed regional rates. The same model can have different dealer pricing and freight costs across states. Compare at least two itemized local quotes with the same model, venting scope, and finish. Verify that each quote covers inspection and any locally required permit or code work.
Regency freestanding stoves compared with wood inserts
A freestanding stove is often less expensive when a compliant chimney and suitable installation location already exist. An insert can make sense when a masonry fireplace is already in place, but a properly sized liner and fireplace preparation may raise the installed bill. If neither setup exists, adding a new chimney system can substantially increase either project’s cost.
Repairing an existing, serviceable stove may cost less than replacing it: a gasket or minor hardware repair could be about $100-$500, while major component or firebox work can be more. Compare the repair estimate with the complete replacement price, including venting and removal. Do not assume an old chimney is compatible without inspection.
Ways to lower the installed Regency stove price
Keep the scope close to the manufacturer’s installation requirements and avoid optional finish upgrades if they do not affect fit or performance. If the chimney is sound, ask whether it can be used safely with the selected model rather than assuming replacement is necessary. Schedule a quote and inspection before peak heating season when installer calendars may be less crowded.
Compare like-for-like written bids and ask about delivery, disposal, permit fees, and inspection charges. Homeowners can clear access and move nearby items before the crew arrives, but should leave appliance connections and chimney work to qualified professionals. The best price comparison is the total installed cost for the same stove model and code-compliant scope.