REME HALO installation cost commonly runs $800-$1,800 for a standard residential HVAC system, with a typical quote near $1,200. The final price depends on the unit model, duct access, local labor rates, electrical needs, and whether an older air purifier must be removed.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed REME HALO | $800 | $1,200 | $1,800 | One system, ordinary duct access |
| Equipment | $400 | $600 | $850 | Model and seller affect price |
| Installation labor | $250 | $450 | $750 | Usually 1-3 hours |
| Replacement cell or lamp | $100 | $175 | $250 | Part price varies by model |
What a standard REME HALO installation costs
For one REME HALO unit fitted to an existing, accessible central HVAC system, homeowners commonly pay $800-$1,800 installed. A straightforward job using standard materials is often $1,000-$1,400; difficult access, a higher-priced model, or extra wiring can push the quote higher. Prices are estimates, not fixed national rates, and product versions and contractor markup vary.
Equipment-only pricing is often about $400-$850, before installation. The installed rate generally covers mounting the unit in the ductwork, connecting power, and basic system testing. A quote around $1,200 is a practical planning figure for one standard installation. Assumptions: one residential system, standard equipment, ordinary access, and no major duct or electrical repairs.
Where equipment, labor, and wiring appear in the quote
Ask the contractor to separate the device from installation and any additional work. These approximate line items help show whether a quote includes a complete installation or only the core unit.
| Quote component | Typical range | What it may include |
|---|---|---|
| REME HALO equipment | $400-$850 per unit | Purifier, power supply, mounting parts |
| HVAC labor | $250-$750 | Duct cut-in, mounting, sealing, test |
| Electrical materials or work | $0-$250 | Connection, wiring, switch, or outlet changes |
| Removal or disposal | $0-$150 | Old purifier removal, if requested |
| Trip or diagnostic charge | $75-$200 | May apply to standalone service visits |
Labor estimates commonly reflect 1-3 hours at roughly $100-$175 per hour, though contractors may quote a flat installation fee instead. Confirm whether the quote includes electrical work, testing, and cleanup before comparing totals.
How duct size and system access change the price
REME HALO units are installed in the HVAC duct system, so the setup and access matter more than the home’s square footage alone. A single central system with a reachable supply plenum is usually less expensive than a cramped attic installation or a system requiring duct modifications. A second furnace or air handler may need its own unit, adding equipment and labor.
Ask whether the quoted model suits the duct dimensions and airflow of the system. For example, a home with two independent air handlers may need two devices, potentially bringing the installed total to about $1,600-$3,600. A duct opening that needs reinforcement or sealing can add roughly $100-$400. System count and duct access are two of the clearest reasons otherwise similar quotes differ.
How long HVAC technicians need for the installation
A routine retrofit often takes 1-3 hours for one HVAC technician when the equipment, power source, and duct access are ready. Difficult access, an unfamiliar system, or additional wiring can extend the visit to 3-5 hours. Labor charges may be bundled into a flat price, so the time estimate does not always appear on the invoice.
Installation during a planned HVAC maintenance visit may reduce a separate trip fee, but it does not necessarily reduce the device price. If a contractor finds damaged ductwork or an electrical issue, the added repair should be priced separately. Request approval before work expands beyond the agreed installation scope.
How regional labor rates affect installed pricing
Contractor rates and travel distances can shift the installed price. Quotes in high-cost metro areas may run about 10%-25% above a typical national estimate, while some rural markets may be 5%-15% lower but add a travel or minimum-service charge. Local product availability and the installer’s markup also affect the equipment portion.
These differences are not guaranteed: a rural area with few HVAC providers can have higher labor charges, and busy urban contractors may charge more for short-notice work. Compare at least two itemized estimates for the same model and scope. Compare the total installed price and included work, not just the equipment line.
What replacement parts and extra HVAC work may add
Some estimates include only installation, while others bundle small electrical materials, an inspection, or removal of an existing purifier. Ask whether sales tax, disposal, and service-call charges are included. A needed outlet or wiring change can add $100-$250; duct repair or a difficult cut-in may add $100-$400, depending on materials and access.
Replacement cells or lamps are a future ownership expense. Depending on the REME HALO version and supplier, a replacement part may cost about $100-$250, with timing determined by the model’s maintenance instructions and condition. Do not assume every model uses the same part or replacement interval. Check the exact model number and expected replacement schedule before accepting a low equipment-only price.
Ways to lower a REME HALO installation quote
Get an estimate that names the specific model, equipment price, labor, wiring, and any removal charge. If the HVAC system is already being serviced, ask whether installation can be completed on that visit to avoid a separate trip fee. Clear access to the air handler and ductwork before the appointment, and remove stored items that block the work area.
Keep the project to one appropriate unit per system unless a technician identifies a specific need for additional equipment. Avoid paying for duct alterations or electrical upgrades without a clear explanation and separate price. Compare comparable, installed quotes rather than choosing an equipment-only listing that excludes labor. Scope control and a written breakdown are the most reliable ways to prevent unexpected charges.