A used Resolute Acclaim wood stove typically costs $700-$2,500, while clean, tested examples or new old stock can reach $3,000-$5,000. The total project budget may run from about $1,500 to $7,000 or more, depending on condition, chimney work, delivery, and local installation rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used stove | $700 | $1,500 | $2,500 | Price depends on condition and included parts |
| Clean or refurbished stove | $1,800 | $3,000 | $4,000 | Ask what repairs and testing were completed |
| New old stock | $3,000 | $4,000 | $5,000+ | Availability is limited; verify model and warranty |
| Installed project | $1,500 | $3,800 | $7,000+ | Assumes stove purchase plus typical labor and connection work |
What a Resolute Acclaim stove costs to buy
The Resolute Acclaim is a discontinued Vermont Castings model, so its price is set largely by condition, local supply, and whether the seller has repaired or tested it. A basic used unit often lists for $700-$1,500; a sound stove with intact firebox parts and working controls commonly falls around $1,500-$2,500. Unused inventory may cost $3,000-$5,000 or more, but a high asking price does not guarantee a current manufacturer warranty or easy access to parts.
For a typical used purchase, budgeting about $1,500 for the stove alone is a reasonable starting point. This assumes a complete unit in serviceable condition, purchased locally, without major firebox repairs or delivery. Assumptions: U.S. resale market, standard used condition, stove only; regional listings vary.
How firebox parts and installation shape the quote
The purchase price is only one part of the expense. Before paying, identify whether the stove includes the needed internal parts, doors, legs, and handles; then budget separately for moving, connector pipe, and any chimney modifications. A qualified installer can inspect the appliance and venting before use.
| Cost item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Stove repairs or replacement parts | $150-$1,200 | Per stove | Fireback, refractory, gaskets, grates, and labor |
| Delivery and moving | $100-$500 | Per job | Distance, stairs, weight, and crew size |
| Connector pipe and fittings | $150-$700 | Per installation | Pipe length, diameter, and single- or double-wall pipe |
| Installation labor | $500-$1,500 | Per job | Access, hearth preparation, and connection complexity |
| Chimney liner or upgrades | $1,000-$3,500 | Per chimney | Height, condition, liner size, and code requirements |
Chimney repairs can cost more than the stove itself. The table gives planning ranges, not a substitute for an on-site quote; taxes, permits, hearth materials, and disposal may be additional.
Why stove condition, model details, and chimney size matter
Condition creates the widest spread in resale prices. Surface rust or worn gaskets may be manageable, but cracked cast iron, damaged refractory components, or missing model-specific parts can turn an inexpensive stove into a costly repair. Request clear photos of the firebox, seams, doors, and controls, and ask for a demonstration or inspection when practical.
Chimney compatibility also affects the total. A venting system sized for the stove and installed to applicable clearances may need only a short connector, while an unsuitable or deteriorated flue can require a liner or other work. Confirm the stove’s exact model and outlet specifications rather than assuming all Resolute Acclaim versions connect identically.
A chimney liner or repair can add $1,000-$3,500, especially when the existing flue is damaged or the run is unusually tall. A difference between a short, accessible flue and a tall or difficult one can also change labor by several hundred dollars.
Can a refurbished Acclaim justify a higher asking price?
Compare the seller’s evidence, not just the word “refurbished.” Ask which parts were replaced, whether the stove was inspected or test-burned, and whether the quoted price includes a return period. A $2,500 stove with documented repairs may be a better value than a $1,000 unit that needs several hundred dollars in parts and uncertain shop labor.
For a used model, set aside roughly $300-$1,200 for likely repair work until an inspection confirms otherwise. A cosmetic cleaning does not establish that the firebox is sound. If critical components are unavailable, confirm that a qualified stove shop can source compatible parts before committing to the purchase.
How regional labor rates change the installed price
Installation quotes can vary by roughly 15%-35% between lower-cost rural markets and higher-cost metropolitan areas, though access to experienced wood-stove installers also affects availability. A straightforward installation in a lower-cost area may have labor near $500-$900; a city job with difficult access, added hearth work, or a booked specialist may reach $1,200-$1,800 before chimney upgrades.
Rural buyers may pay less for labor but more for delivery or travel charges if the nearest installer is far away. Ask whether the quote includes a site visit, delivery, hearth adjustments, and final inspection. Compare written quotes with the same scope, because a low labor figure may exclude pipe, travel, or required venting work.
Used, refurbished, or new old stock price comparison
A used Acclaim has the lowest purchase price, but the buyer takes on more condition risk. Refurbished units cost more when repairs and testing are documented. New old stock may have less wear, but it is still a discontinued appliance; confirm storage condition, included components, and warranty terms directly with the seller.
Compare the expected ready-to-install total, not only the listing price. For example, a $900 used stove plus $700 in parts and delivery costs $1,600 before installation. A $2,400 inspected unit that needs only a $250 move may be less expensive overall if both require the same chimney work.
What installation time and crew charges to expect
A basic connection to a suitable existing hearth and chimney may take 4-8 hours with a two-person crew. Rates often work out to about $75-$150 per installer-hour, or roughly $500-$1,500 for a typical installation. A new liner, hearth changes, or difficult access can extend the job to a full day or longer and increase the quote.
Ask the installer to state whether removal of an old stove, disposal, and chimney cleaning are included. An old appliance haul-away may add $100-$300, while a cleaning or inspection can add about $100-$300 depending on location and service scope. A written quote should identify any work that could trigger extra charges once the flue is inspected.
Where to trim the Resolute Acclaim project budget
Keep costs controlled by inspecting the chimney before buying the stove, since a major venting repair can change the project economics. Compare local pickup with delivery, but do not move a heavy cast-iron stove without suitable equipment and help. Get two or three written installation quotes that specify pipe, labor, travel, liner work, and inspection.
Choose a stove based on verified condition rather than cosmetic appearance, and avoid paying a premium for unverified restoration claims. If the installed total approaches the cost of a comparable current stove with available parts and warranty support, compare those alternatives before proceeding. The most useful savings usually come from avoiding surprise chimney work and buying only a stove that can be inspected and maintained.