A RIDGID BS14000 band saw typically costs about $150-$350 used, while rare unused or refurbished units can reach $350-$600. Price depends most on condition, included accessories, local availability, and whether the saw can be inspected and tested before purchase.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used BS14000 | $150 | $250 | $350 | Working saw, condition and accessories vary |
| Unused or refurbished | $350 | $450 | $600 | Uncommon; verify what was serviced |
| Replacement blade | $15 | $25 | $40 | Price varies by length, width, and tooth pattern |
| Pickup and setup | $0 | $50 | $150 | Self-pickup through local moving help |
What a 14-inch BS14000 usually sells for
The BS14000 is a stationary 14-inch bandsaw, so its price is best compared with other used floor-standing woodworking saws rather than compact benchtop models. Because it is an older, discontinued model, current buyers are generally choosing among private-party listings, used-tool dealers, and occasional refurbished or unused inventory—not a stable new retail price.
A fair working-condition budget is around $200-$300 before transport or repairs. At the low end, expect a machine with cosmetic wear, a dull blade, or missing accessories. Higher asking prices are more defensible when the saw runs smoothly, tracks correctly, includes a fence or stand, and has documented maintenance. Assumptions: U.S. private-party pricing, standard configuration, local pickup, and no major mechanical repairs.
How blades, setup, and repairs change the quote
For a used saw, the purchase price is only part of the outlay. Inspect the tires, guides, table, switches, and motor before deciding whether a low listing is truly a bargain. A replacement blade is a routine expense; damaged tires, worn bearings, or electrical faults can add substantially more.
| Quote item | Typical range | What the price covers | When it may be needed |
|---|---|---|---|
| Blade | $15-$40 per blade | Common replacement blade | Dull, rusted, or wrong-tooth blade |
| Guides or bearings | $20-$100 | Parts, depending on type | Excessive play or poor blade control |
| Tires | $30-$80 per set | Replacement wheel tires | Cracking, slipping, or uneven wear |
| Repair labor | $75-$125 per hour | Local small-equipment service | Diagnosis or mechanical repair |
| Transport | $50-$150 | Local help loading and moving | No suitable vehicle or lifting help |
Repair shops may also charge a diagnostic or minimum service fee of roughly $50-$100, even if the owner declines the repair. A single repair requiring two labor hours can add $150-$250 before parts. Ask for a parts-and-labor estimate before buying a saw that cannot be demonstrated.
Why condition and included accessories shift the price
Motor operation and blade tracking are the first price drivers: a clean test cut is more useful than an assurance that the saw “worked last time.” Check that the blade moves without wobble, the wheels turn freely, the guides can be adjusted, and the table tilts and locks securely. A missing guard, damaged power switch, or unusual motor noise can justify a lower offer or a decision to walk away.
Accessories also matter. A fence, miter gauge, stand, and usable blade can save roughly $25-$100 compared with buying replacements separately, though the value depends on condition and compatibility. Confirm the model plate reads BS14000 and compare included parts with the seller’s description; similar-looking 14-inch saws may have different components.
Before agreeing to a premium, test the saw under power and price any missing parts. Ask the seller to make a short cut in scrap wood if practical, then check for a straight cut, unusual vibration, and blade drift. A saw that starts but cannot track reliably may need adjustment or repair rather than a higher price.
Where U.S. buyers may see different asking prices
Used-tool prices often vary more by local supply than by a fixed regional schedule. In large metro areas with active woodworking resale markets, several comparable saws may keep offers near the $150-$300 range. In rural areas or places with few listings, a seller may ask 10%-20% more because alternatives are scarce, although transport can erase that difference.
Higher labor-cost markets may also have pricier repair service, while local pickup can make a heavier machine economical when a buyer has a truck and help loading. Online shipping is often a poor fit for a stationary saw: crating and freight can add $150-$300 or more, sometimes pushing the total above the value of the machine.
Compare the delivered total, not just the listing price. For example, a $200 saw requiring $100 in transport and a $30 blade costs $330 before any repair. A nearby $275 unit with a working blade and included stand could be the less expensive purchase overall.
Is a repaired BS14000 cheaper than another 14-inch saw
For a working BS14000 priced below about $300, buying used may cost less than replacing it with a comparable new 14-inch bandsaw. But if the used machine needs $150-$250 in labor and parts, the total can approach $400-$550. At that point, buyers should compare current new models, warranty coverage, and the cost of any required stand or fence.
A compact benchtop saw may have a lower purchase price, often about $150-$300, but it is not an equal substitute if the work requires a larger table or greater resaw capacity. A different used floor-standing saw in similar condition is the closer comparison. Include blade size, available replacement parts, and the machine’s condition in the comparison rather than relying on brand name alone.
Set a repair ceiling before purchase, such as $100 for a saw that already costs $250. If inspection suggests the motor or wheel assembly needs major work, a lower-priced alternative may be a better use of the budget.
Ways to keep the BS14000 purchase within budget
Arrange a powered inspection before negotiating, and make an offer based on specific deficiencies such as a missing fence, cracked tires, or a blade that needs replacement. Ask whether the seller will include accessories or help load the saw rather than paying extra for parts that may not fit. Local pickup usually avoids freight and reduces the risk of shipping damage.
Do not pay an unused-tool premium without confirming that the saw is complete and has not been stored in damp conditions. For a machine with modest wear, a fresh blade and careful adjustment may be more cost-effective than paying a dealer’s refurbished price. Conversely, a cheap saw with electrical or tracking problems deserves a repair estimate before purchase.
A practical target is $200-$300 for a tested, complete unit, with repair money reserved separately. Compare at least two local listings when possible, and include taxes, transport, replacement parts, and any service fee in the final budget.