A used Ridgid TS3650 table saw typically costs $300-$700, with a well-maintained example averaging about $450-$550. Price depends on condition, the fence and accessories included, local demand, and whether the motor, trunnions, or alignment need attention.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used TS3650 saw | $300 | $500 | $700 | Working saw, condition and included parts vary |
| Clean, complete example | $500 | $650 | $850 | May include original fence, wings, and accessories |
| Repair or missing parts | $100 | $250 | $500+ | Purchase price only; repairs add expense |
| Moving and transport | $0 | $50 | $150 | Depends on distance and loading help |
What Does a Used Ridgid TS3650 Cost?
The TS3650 is a discontinued 10-inch contractor-style saw, so current prices are primarily resale prices rather than new retail prices. A basic working saw with ordinary wear commonly lists around $300-$550; a clean, complete saw may reach $550-$850. Saws advertised above that level need unusually good condition, extras, or strong local demand to justify the premium.
A realistic target for a complete, functional saw is about $450-$600 before transport or repairs. Check whether the sale includes the fence, cast-iron wings, blade guard, miter gauge, rip fence rails, and stand. Missing accessories can make an apparently low price less attractive.
Assumptions: U.S. private-party resale, standard 10-inch saw, functioning motor, and no major structural damage; local prices vary.
Fence, motor, and repair expenses in a TS3650 quote
A used-saw quote can include more than the asking price. Replacement parts may be harder to source than parts for current models, so buyers should inspect the machine before paying extra for a seller’s claims about recent repairs. The following are planning ranges, not fixed manufacturer prices.
| Cost item | Typical range | What changes the charge | Budget note |
|---|---|---|---|
| Fence or rail components | $40-$200 | Missing parts, condition, and availability | Confirm the fence locks squarely |
| Motor or electrical repair | $75-$300 | Switch, wiring, capacitor, or motor fault | Replacement motor may cost more |
| Blade and basic setup | $30-$120 | Blade quality and alignment work | Does not include extensive repair |
| Transport or loading | $0-$150 | Distance, stairs, trailer, and help | Ask before arranging pickup |
Independent repair labor often runs $75-$125 per hour, with shop minimums sometimes applying. A short inspection or adjustment may take one hour, while diagnosing a motor or alignment problem can take longer.
Price the saw together with any missing fence parts, electrical work, and transportation. A $350 listing can exceed a complete $550 saw if repairs and pickup are substantial.
How condition and included parts shift the price
Mechanical condition matters more than cosmetic wear. A smooth-running motor, stable trunnions, intact table, and fence that stays parallel to the blade support a higher price. Rust on the working table, a bent rail, damaged arbor, or a motor that trips a breaker can warrant a lower offer—or walking away.
Accessories affect value, but only when they are useful and serviceable. A blade guard, miter gauge, mobile base, and original extensions can add practical value; a worn blade or improvised stand may add little. Verify that included components fit the TS3650 instead of assuming that every Ridgid accessory is compatible.
Deduct the likely repair bill from the price of a comparable complete saw. For example, if a missing fence component appears likely to cost $100 and the complete local alternative is $500, a $450 incomplete saw may not be the better buy.
Inspect the table for cracks and severe pitting, turn the blade by hand with the saw unplugged, and check that the arbor has no obvious play. Run the saw only after confirming the guard and electrical setup are safe. A brief test cut can reveal fence or blade alignment issues that a seller’s description may not mention.
How many hours does setup or repair take?
Plan for roughly 2-4 hours to load, assemble or reassemble, check alignment, and make a test cut when the saw is complete and in working order. A motor diagnosis or significant fence and trunnion adjustment may add 1-3 shop hours. At $75-$125 per hour, even a modest repair can change the total purchase cost considerably.
The saw is heavy and awkward to move, so transport can require a pickup or trailer and at least two people. Ask the seller to confirm that the saw can be disassembled for loading, and arrange help before pickup. If delivery is available, compare its fee with the cost and risk of moving the saw yourself.
Budget for setup time even when the saw starts and runs. Accurate blade-to-miter-slot and fence alignment take time, and poor alignment can affect cut quality and safety.
Is a TS3650 cheaper than a new contractor saw?
A used TS3650 can cost less than a new contractor saw, but the comparison should include repairs, transport, and any missing safety or fence components. A used purchase around $450-$600 may make sense when the saw is complete and passes inspection. A machine needing several hundred dollars in work can lose its price advantage.
Compare the TS3650 with current 10-inch jobsite and contractor-style saws on the features that matter: table capacity, fence quality, portability, motor setup, warranty, and parts support. A jobsite saw may cost less new but have a lighter stand or smaller work surface; a new contractor-style model may cost substantially more but includes current support and warranty terms.
Compare the ready-to-cut total, not just the seller’s asking price. Include a blade, necessary repairs, moving, and any missing accessories in both options.
Where U.S. used-saw prices run higher
Private-sale prices vary by local supply and demand. In large metro areas with active woodworking communities, complete, clean saws may sell for roughly 10%-20% above a broad-market asking price. Rural markets may have fewer buyers and listings, but transport distances can erase a lower purchase price. These are planning differences, not guaranteed regional rates.
Local availability also affects bargaining. When several contractor saws are listed nearby, a buyer can compare condition and included equipment. If the TS3650 is the only complete saw within a practical driving distance, the seller may have less reason to discount it.
Use nearby listings for comparable 10-inch contractor saws, not unrelated compact jobsite models. Compare the same condition and accessory level, and account for the cost of traveling to collect each saw.
How to negotiate a safer TS3650 purchase
Ask for the model label, a clear photo of the fence and rails, and a video of the motor starting and running. Request a test cut if possible, and agree on the pickup arrangement before setting a price. Bring a straightedge and basic measuring tools to check the table and fence during inspection.
Offer a lower amount when a specific issue has a verifiable cost, such as a missing accessory or a needed electrical diagnosis. Avoid paying a premium for vague claims such as “recently serviced” without a receipt or a clear description of the work. If the motor stalls, the arbor has significant play, or the table is cracked, a lower offer may not offset the uncertainty.
Set a maximum price based on a complete, working example minus documented deficiencies. That approach keeps negotiation tied to repair and replacement costs rather than the seller’s original purchase price.