Homeowners commonly pay a total price ranging from $4,000 to $16,000 for an 1100 sq ft roof, depending on materials, labor, and region. The price you see will hinge on roof style, slope, existing decking, and local contractor rates. This article presents concrete cost ranges and breakouts to help budget for a new roof or replacement.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed roof (all-in, 1100 sq ft) | $4,000 | $8,000 | $16,000 | Includes materials, labor, and basic disposal |
| Asphalt shingles (3-tab or architectural) | $3.00/sq ft | $4.50/sq ft | $5.50/sq ft | Per sq ft installed |
| Metal roofing (steel/aluminum) | $7.00/sq ft | $9.50/sq ft | $12.00/sq ft | Residential panels or standing seam |
| Roof removal and disposal | $1,000 | $2,500 | $4,000 | Depends on old material and pitch |
| Permits and inspections | $100 | $500 | $1,000 | varies by city or county |
Asphalt Shingles for 1100 Sq Ft Roof Costs
Most common choice for cost-conscious buyers, asphalt shingles typically run $3.00 to $5.50 per sq ft installed. For an 1100 sq ft roof, that translates to about $3,300 to $6,050 in typical scenarios. Assumptions: standard preexisting decking, normal attic access, and mid-range shingle quality. Location and pitch can move prices by ±20%.
Prices include underlayment, starter shingles, flashing, and basic ventilation work. A higher-end architectural shingle or extra waterproofing can push the high end toward $7,000 to $8,000 total for the same area in some markets.
Cost components to expect
- Materials: $1.50–$3.50 per sq ft for shingles, plus underlayment
- Labor: 1–2 days for two-person crew on a typical 1100 sq ft roof
- Waste removal and disposal: $0.20–$0.50 per sq ft if waste is modest
Metal Roofing for 1100 Sq Ft: Price Drivers
Metal roofs offer durability and longer life, but at a higher price. Expect $7.00 to $12.00 per sq ft installed, or roughly $7,700 to $13,200 for 1100 sq ft. The range covers steel, aluminum, or coated panels, and standing-seam versus panel styles. Regional labor differences and the need for specialized equipment drive the high end in some markets.
Metal roofs often require roof deck assessment and potentially upgraded underlayment; expect installation time to be longer if metal trim, flashing, or integrated gutters are needed.
Labor Time And Crew Size For an 1100 Sq Ft Roof
Labor impacts cost more than many buyers expect, especially in markets with high prevailing wages. Typical crews vary from 2 to 4 tradespeople, with 1–3 days on-site for asphalt installs and 2–4 days for complex metal or tile jobs. Labor rates commonly range from $75 to $125 per hour depending on region and crew specialization. In practice, total labor cost usually accounts for 40% to 60% of the installed price.
Labor hours can be estimated with a simple formula: although actual field hours depend on roof pitch, weather, and debris handling.
Regional Price Variations Across the U.S. For 1100 Sq Ft Roofs
Pricing differs substantially by climate zone and urban vs rural markets. In the Southeast and Midwest, asphalt installs often land near the lower end of the range, while the Northeast and West Coast can push costs higher due to labor rates and permitting. A typical regional delta might be ±20% to ±40% from national averages.
For budgeting, assume asphalt shingles: $3.60–$5.00 per sq ft in low-cost regions, and $4.50–$5.50 in higher-cost regions; the total for 1100 sq ft follows proportionally.
Removal, Prep, And Disposal For an 1100 Sq Ft Roof
Removing an existing roof often sits between $1,000 and $2,500, depending on material and complexity. Prep work, including decking inspection and minor repairs, adds $0.50–$1.50 per sq ft. Full disposal costs can climb in areas with strict recycling or dumping fees. In some markets, combined removal and new roof install can be priced as a bundled package to reduce surprises.
Permits, Inspections, And Code Upgrades By Location
Permits add a predictable subtotal, usually a few hundred dollars. Typical permit costs range from $100 to $800, with inspections possibly adding $50 to $200. Where code upgrades are required (e.g., upgraded venting, fire-retardant underlayment, or attic hatch access), budget an additional $300 to $1,000.
Ways To Trim 1100 Sq Ft Roof Price Without Sacrificing Quality
Smart material choices and scope control are the primary levers. Consider delaying premium upgrades, replacing only damaged decking, or choosing a standard asphalt system instead of luxury underlayment. Scheduling during off-peak months can lower labor rates by 5% to 15%. Bundling removal with new installation sometimes yields a 5%–10% discount when quoted as a single project.
Cost Breakout: Quote By Job Phase For 1100 Sq Ft Roof
A detailed quote helps compare bids and track expenses. The table below shows a typical phase-by-phase breakdown for an 1100 sq ft roof replacement using asphalt shingles.
| Phase | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $1,800 | $3,900 | $5,750 | Shingles, underlayment, flashing |
| Labor | $2,000 | $3,600 | $5,000 | Two-person team, 1–2 days |
| Removal/Disposal | $900 | $1,800 | $2,800 | Old roof debris handling |
| Permits & Inspections | $100 | $350 | $700 | Location-dependent |
| Equipment & Misc. | $100 | $350 | $500 | Scaffolding, dump fees, nails |
| Contingency | $100 | $300 | $600 | Unforeseen decking issues |
| Total | $5,000 | $9,000 | $14,350 | Estimates for budgeting |
Assumptions: Midwest labor rates, standard asphalt shingles, normal attic access, and no major decking repairs.