A Samsung washing machine main control board typically costs $150-$450 for the part, with installed replacement commonly totaling $250-$700. The model number, board availability, labor rate, and whether diagnosis or related repairs are needed can change the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Replacement board | $150 | $275 | $450 | Part-only price; varies by model and seller |
| Labor | $100 | $175 | $300 | Usually 1-2 hours, excluding difficult access |
| Installed replacement | $250 | $450 | $700 | May include diagnosis and basic testing |
What a Samsung washer control board replacement usually costs
For many standard Samsung top-load and front-load washers, a compatible main control board costs about $150-$450. A repair visit and installation often bring the total to $250-$700. An older or less common model may cost more if the correct board is discontinued, scarce, or sold only as part of an assembly.
A reasonable planning estimate is about $450 installed for a commonly available board and straightforward replacement. Prices assume a standard residential washer, normal access, and no additional damaged components. Assumptions: U.S. parts pricing, standard labor, and a repairable washer with an identifiable model number.
How the board, diagnosis, and labor shape the quote
A repair estimate may include more than the circuit board itself. Ask whether the service-call fee is credited toward the repair and whether the quote includes testing after installation. Some providers charge separately for diagnosis, programming, or a return visit.
| Quote item | Typical price | What it covers | Common variation |
|---|---|---|---|
| Main control board | $150-$450 | OEM or compatible replacement part | Model, stock, and board revision |
| Diagnostic visit | $75-$150 | Inspection and fault testing | May be waived or credited |
| Installation labor | $100-$300 | Removal, installation, and basic test | About 1-2 hours in typical cases |
| Related parts | $20-$200 | Harness, sensor, or connector if needed | Only applies when a separate fault is found |
Compare the full installed price, not just the part listing. Many appliance technicians charge roughly $75-$150 per hour, though some use flat labor pricing.
Why model number and board revision change the part price
Samsung washers can use different control boards even when the exterior model names look similar. The full model code, often printed on a label around the door opening or on the back, helps match the board and revision. A wrong match can cause installation delays or compatibility problems.
Board price can also rise when a model is older, uncommon, or has limited parts supply. A basic board may fall near $150-$250, while some newer or less available assemblies reach $350-$450 or more. A board that requires a separate display or housing assembly can add to the parts bill.
Verify the complete model code and part number before buying a board. A seller’s compatibility list and return policy matter because opened electronic parts may be difficult to return.
When labor, wiring damage, or access adds to the repair
A typical control-board replacement takes about 1-2 hours once the fault is confirmed. A cramped installation, corroded connector, damaged wiring harness, or repeat diagnostic visit can extend the job. If a power surge or water leak affected other components, the technician may recommend additional tests before installing a new board.
Some service companies charge a minimum visit fee of $75-$150 even when the repair is declined. If the board must be ordered, a second trip may add roughly $50-$125, depending on local policy. Request a written breakdown of diagnostic, parts, labor, and return-visit charges.
Three realistic quotes for different Samsung washer repairs
These examples illustrate how model availability and labor change the bill; they are not fixed national prices. Regional rates, taxes, and service-company policies can shift the totals.
| Repair scenario | Part | Labor and fees | Estimated total |
|---|---|---|---|
| Common top-load model, 1-hour replacement | $180-$250 | $150-$225 | $330-$475 |
| Front-load model, 1.5-hour repair and diagnosis | $250-$350 | $200-$300 | $450-$650 |
| Older model, scarce board and extra testing | $350-$500 | $225-$350 | $575-$850 |
For a scarce board, confirm the part is available before paying for a second appointment. A quote near the upper range may reflect parts sourcing rather than unusually long installation time.
OEM, refurbished, and compatible boards compared
New OEM boards commonly cost about $200-$450, depending on the washer model. Compatible aftermarket boards may be around $150-$350 when a suitable version is available. Refurbished boards can be listed near $100-$250, but the buyer should check testing standards, warranty length, and return terms.
Lower part prices can be offset by shipping, restocking fees, or limited coverage if the board fails. A professional repair may include a parts warranty, while a self-purchased component may not. Compare warranty and return protection alongside the purchase price.
How to lower the control-board repair bill safely
Provide the technician with the full model number and any error codes before scheduling; this can reduce identification time and help confirm parts availability. Ask whether the diagnostic charge is applied to the repair, and get separate prices for the board, labor, and any recommended additional parts.
Before approving a board replacement, ask whether the technician has ruled out a faulty power supply, loose connection, or damaged harness. These faults can resemble board problems, and replacing the board without confirming the cause may waste money. Pay for the confirmed failure, not a guess based only on a symptom.
When washer age makes replacement worth comparing
Compare the repair estimate with the washer’s condition, age, and expected remaining service life. A $300-$500 repair may be sensible for a newer machine with no other major faults. If the installed quote approaches $700-$850, the washer is older, or other costly components are failing, compare it with the price of a replacement washer and delivery.
Use the complete repair quote and the washer’s broader condition to make the decision. A board replacement does not guarantee that unrelated wear or future failures will be resolved.