A Samsung washing machine motor replacement typically costs $300-$650, including parts and labor, though the price can exceed $800 for certain models or related electrical repairs. The motor type, washer age, local labor rate, and whether the failure is actually in the motor or its control electronics drive the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Replacement motor part | $120 | $250 | $500 | Model-specific; direct-drive components vary |
| Labor and service | $150 | $250 | $400 | Includes diagnosis and standard installation |
| Total installed repair | $300 | $475 | $800+ | Higher with control-board or access issues |
| Motor-related control repair | $200 | $350 | $600 | Separate repair if inverter or board is faulty |
What a Samsung washer motor replacement usually costs
For a common residential Samsung front-load or top-load washer, a motor-related repair generally falls between $300 and $650 after diagnosis, parts, and labor. A straightforward repair using an available aftermarket part may land near the low end; an original equipment part, difficult access, or a high labor market can push the bill toward $800 or more.
Samsung washers often use a direct-drive arrangement rather than a conventional belt-driven motor. A technician may replace the stator, rotor, or another motor assembly component, depending on the model and failure. Part prices can range from about $120 to $500, while a complete motor assembly for a less common model may cost more.
A realistic budget for a typical installed motor repair is about $475, but the model number and confirmed failure matter more than the brand alone.
These estimates assume a standard household washer, normal access, no water or structural damage, and a repair in a typical U.S. market. Assumptions: one visit, standard parts availability, and no extra control-board replacement.
How stator parts, diagnosis, and labor appear on quotes
Motor-related estimates can include more than the motor itself. The technician may charge a diagnostic or dispatch fee, then credit some or all of it toward an approved repair. Ask whether the quoted labor includes diagnosis, testing after installation, and any return visit needed to obtain a part.
| Quote item | Typical price | What changes the charge | Often included |
|---|---|---|---|
| Diagnostic or service visit | $75-$150 | Distance, appointment type, local minimum | Error-code check and initial testing |
| Motor, stator, or rotor part | $120-$500 | Model, original versus aftermarket, availability | Replacement component only |
| Installation labor | $150-$350 | Access, disassembly, testing time | Removal, fitting, reassembly |
| Delivery or special order | $0-$100 | Shipping speed and supplier location | Sometimes built into the part price |
| Tax and disposal | $0-$60 | Local tax and old-part handling | Varies by company and jurisdiction |
Typical labor may take 1.5-3 hours, but diagnosis and reassembly can add time. A useful estimate check is . At $90-$150 per hour, two labor hours alone represent $180-$300, before the part or visit fee.
Compare the written total and included work, not just the advertised motor-part price.
Why model number and motor design change the part price
Samsung motor components are not universally interchangeable. The full model number, including its suffix, helps a parts supplier identify the correct stator, rotor, harness, or assembly. A common, currently supported model may have several sourcing options; a discontinued or less common machine can require an original part or special order.
Expect roughly $120-$250 for some individual motor components, around $200-$400 for many model-specific parts, and $350-$500 or more for certain complete assemblies. Aftermarket components can reduce the part bill, but compatibility, supplier return terms, and warranty coverage should be checked. An original part may cost more but can simplify fit and support.
Capacity and configuration also matter. A large-capacity washer, a particular top-load design, or a model with limited parts availability may not use the same assembly as a smaller or older machine. A quote that lists only “washer motor” without a part number makes it difficult to confirm fit or compare prices.
Use the full model number from the washer label to verify the part and avoid pricing the wrong assembly.
How motor diagnosis and repair time affect labor
A motor symptom does not prove the motor has failed. A washer that will not spin may have an unbalanced load, damaged wiring, a failed sensor, a seized drum component, or a control problem. Error codes can help direct testing, but a technician should check the machine before recommending a motor replacement.
For a confirmed, accessible motor component, installation commonly takes about 1.5-3 hours. More disassembly, corrosion, a stuck rotor, or wiring damage can extend the job to 3-4 hours. At an hourly rate of $90-$150, that difference can add $90-$150 or more to labor. Some companies use flat-rate pricing instead of displaying an hourly calculation.
Ask whether the estimate separates diagnosis from repair and whether the diagnostic fee is applied to the final invoice. If a technician identifies a control-board problem after initial testing, request an updated quote before authorizing that additional work.
Testing the drive system and control electronics first can prevent paying for a motor that was not the cause.
When a motor repair beats replacing the entire washer
A $300-$500 motor repair may be reasonable for a washer that is in good condition, has no major leaks, and is roughly five to eight years old. A larger bill deserves closer comparison when the appliance is older, has repeated failures, or needs several expensive parts. A comparable new washer can cost roughly $600-$1,500 before delivery and installation, with premium models costing more.
Compare the repair estimate with the cost of a replacement machine plus delivery, installation, and removal of the old unit. If the washer also needs a control board, drum bearing, or suspension work, the combined repair may exceed $700-$1,000. A repair may still be worthwhile, but the total expected expense matters more than one part in isolation.
Parts and labor warranties affect the comparison. Repair providers may offer a 30-day to one-year labor warranty, while part coverage varies by supplier and component. Get the warranty duration and exclusions in writing, especially for a special-order part.
For an older washer with multiple major faults, compare the complete repair bill with replacement and installation costs.
Regional labor rates can shift the installed price
Labor and service-call charges vary across the United States. A repair in a major metro area may cost about 10%-25% more than a similar job in a lower-cost rural market, reflecting wages, travel, and business overhead. Remote locations can also have higher prices when technicians must travel farther or parts require special shipping.
For a standard motor repair, a lower-cost market may produce a total near $300-$450, while many suburban and mid-sized city quotes fall around $400-$650. In high-cost urban areas, difficult scheduling or premium service rates can push a similar repair to $550-$800. These are broad comparisons, not fixed regional price lists; model and parts availability can outweigh geography.
When comparing quotes, ask whether each total includes the same diagnostic charge, replacement part type, tax, and labor warranty. A lower estimate that excludes the visit fee or uses a different part may not be less expensive at completion.
Regional differences often affect labor and service fees more than the washer’s required motor part.
Extra charges for wiring, control boards, and hard access
A motor-related repair can grow if testing reveals another failed component. Wiring or connector repairs may add about $50-$200, depending on damage and labor. A control board or inverter-related repair can cost roughly $200-$600 installed; if both the board and motor assembly need replacement, the combined quote may reach $700-$1,000 or more.
Other possible additions include a $75-$150 diagnostic fee, $20-$100 for expedited part delivery, or a higher labor charge for a washer installed in a tight closet, stacked arrangement, or difficult-to-reach location. Water damage, corrosion, or a damaged harness can require additional work. These charges should be identified before repair whenever they can be anticipated.
Ask the technician to distinguish confirmed failures from possible future concerns. A line item for a motor and one for an inverter or board should include separate part and labor amounts, so the homeowner can decide whether to complete all work at once.
Unbundle related electrical repairs in the estimate so each added cost has a clear diagnosis and price.
Ways to lower a Samsung motor repair quote
Start with the exact model number and a description of the symptoms, including any displayed error code, when contacting repair companies. This helps the provider check part availability and may reduce repeat visits. Do not order a motor based only on a symptom or online code list; incorrect parts can create return fees and delay the repair.
Get two or three itemized quotes, comparing diagnostic fees, part numbers, labor, travel, tax, and warranty. Ask whether an aftermarket part is available and what warranty it carries. A lower part price is not automatically better if the component is poorly supported or the labor warranty is short.
Keep the washer accessible and clear the work area before the appointment. If replacement is not urgent, ask whether standard scheduling avoids a rush or after-hours fee. Avoid authorizing a control board, wiring harness, or complete assembly until testing supports the added repair.
The most reliable savings come from confirming the failed component, comparing complete quotes, and limiting repairs to necessary work.