A Schrader wood stove may cost about $300-$2,500 used, depending on its model, condition, age, and local availability; installation can add $1,500-$5,000 or more. Because prices for older or uncommon stoves are rarely standardized, buyers should confirm the maker and model and budget separately for chimney work, permits, and code compliance.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used stove only | $300 | $1,100 | $2,500 | Price depends on condition, completeness, and local supply |
| Professional installation | $1,500 | $3,000 | $5,000+ | Higher when a new chimney or major modifications are needed |
| Installed project total | $1,800 | $4,100 | $7,500+ | Assumes a used stove and standard residential installation |
What a Schrader stove costs by condition and scope
For a used Schrader stove, a reasonable planning range is $300-$2,500 before delivery or installation. A basic unit with surface rust, missing accessories, or uncertain service history may fall near the low end. A clean, complete stove with identifiable model details and evidence of sound operation may command more, particularly where vintage stove supply is limited.
There may not be a consistent current retail price for a new Schrader model. Confirm the nameplate, model number, manufacturer, and date before comparing listings; an unfamiliar or misidentified stove can be difficult to value or certify. Use $1,100 as a rough used-stove midpoint, not a guaranteed brand price.
Assumptions: U.S. used-market asking prices, stove only, before shipping, repairs, tax, or installation.
How stove, chimney, and labor charges build the quote
Installation estimates vary most with the chimney route and whether the home already has a suitable, code-compliant system. The figures below are broad U.S. planning ranges; local inspection requirements and site access can change them.
| Quote item | Typical price | Pricing basis | What changes it |
|---|---|---|---|
| Used Schrader stove | $300-$2,500 | Per stove | Model, condition, accessories |
| Chimney pipe and fittings | $500-$2,000 | Per installation | Height, route, pipe type |
| Hearth pad and wall protection | $200-$1,200 | Per setup | Required clearances and finish |
| Installation labor | $600-$1,800 | Per job | Access, assembly, and chimney work |
| Permit and inspection | $50-$500 | Per project | Municipality and inspection scope |
| Delivery or removal | $100-$600 | Per trip or unit | Distance, stairs, and disposal |
A typical installation may require 6-12 labor hours at roughly $75-$150 per hour, although contractors often quote a fixed job price. Request an itemized quote that separates the stove from chimney materials and labor.
Which model, firebox size, and condition raise the price
Capacity, construction, and safety condition affect both purchase price and the cost to put a stove into service. A small stove intended for a space under about 1,000 square feet may sell for less than a larger firebox designed to heat 1,500 square feet or more, but actual heating performance also depends on insulation, climate, and layout.
Missing legs, doors, grates, or firebrick can add roughly $100-$700 in parts and repair labor. Cracked cast iron, warped components, or a damaged flue collar may make restoration uneconomical. Before buying, check the model plate and have a qualified technician assess the firebox, doors, and connection requirements. Do not assume an old stove meets current emissions or installation rules because it appears intact.
Where rural and metro installation rates differ
Labor and delivery can vary considerably by location. In rural areas, installation labor may be 10%-25% below a major metro quote, but a long drive, limited contractor availability, or special-order chimney parts can erase the difference. Dense urban markets may run 15%-30% above national planning figures, especially when access, parking, or building approvals complicate the job.
These are directional comparisons, not fixed regional tariffs. Get at least two local bids and ask whether travel, delivery, permit handling, and inspection corrections are included. Compare the complete installed price rather than the stove listing alone.
When chimney height and roof access add labor
A straightforward replacement using a usable existing chimney may cost less than installing a new route through ceilings and a roof. A new insulated chimney system can add roughly $1,000-$3,500, with added height, offsets, roof pitch, and finished ceilings increasing the total. A chimney run over 15 feet or difficult roof access may require extra labor or equipment.
Removing an old stove may add $100-$400; hauling away a masonry or metal chimney section can cost more. Ask whether the installer has included roof flashing, supports, a cap, and any needed hearth or clearance modifications. Written scope matters because “stove installation” does not always include chimney construction or removal.
Can preparation and careful buying lower the price
Buy only after verifying the model and arranging an inspection. A low listing price can become expensive if the stove needs specialty parts, cannot be installed legally, or requires extensive chimney upgrades. Measure the available area and confirm clearance requirements before transport; avoid paying to move a stove that cannot fit the intended location.
Where practical, schedule outside peak heating-season demand and ask whether the installer can combine delivery and installation. Compare quotes with the same chimney length, hearth work, permit allowance, and disposal scope. Keep the purchase price separate from required safety work when setting a budget.
Three Schrader stove budgets for common purchase scenarios
A basic used-stove purchase might total $1,000-$2,000: a $500-$900 stove, $100-$250 delivery, and $400-$850 for inspection or limited repairs. This does not include full installation.
A standard setup with a suitable existing chimney might land around $3,000-$5,000: a $700-$1,500 stove, $1,500-$2,700 in installation and materials, plus permit and delivery charges. A home needing a new chimney could reach $5,000-$8,000 or more after the stove, pipe system, hearth work, labor, and inspection. These examples are planning totals, not confirmed Schrader dealer quotes.
Do permits and safety checks change the final bill
Permit rules vary by city and county, and some areas restrict older, uncertified wood stoves or require specific emissions standards. A permit and inspection may cost $50-$500, while required chimney corrections or replacement can add thousands. Confirm local rules with the building department before buying or moving the stove.
Ask the installer to identify the applicable clearance, hearth, and chimney requirements in writing. If the stove has no readable label or documentation, local officials or insurers may require additional review. Confirm approval before purchase to avoid paying for a stove that cannot be installed at the property.