Security door prices for sale typically range from $300 to $3,000 installed, while custom iron doors can cost $6,000 or more. Door type, material, custom sizing, lock hardware, and installation conditions have the biggest effect on the quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Security screen door | $300 | $850 | $1,800 | Installed; standard opening and mesh |
| Steel security entry door | $800 | $1,700 | $3,500 | Installed; door and basic hardware |
| Custom iron security door | $1,500 | $3,500 | $6,500+ | Installed; design and finish affect price |
| Door-only purchase | $200 | $700 | $2,500+ | Excludes labor and possible freight |
Installed prices for screen, steel, and iron security doors
For a standard 36-by-80-inch opening, buyers often pay $500-$1,200 for a basic security screen door, $1,000-$2,500 for a steel security entry door, and $2,000-$5,000 for a made-to-measure iron door. Premium designs, reinforced frames, specialty finishes, or difficult access can push totals higher. The average installed purchase across common models is roughly $1,500, but that figure is not a quote for every door type.
Retail prices shown as “for sale” may cover the door slab or screen unit only. Confirm whether the listed price includes the frame, hinges, lockset, delivery, removal of an old door, and installation. Assumptions: standard single-door opening, mid-range materials, normal access, and no major framing repairs. Installed pricing is the most useful comparison because door-only prices leave out labor and fit-related charges.
What frame, lock, and installation add to the quote
Door quotes combine the product with fitting and, when needed, removal or opening repairs. The ranges below reflect common U.S. jobs; custom fabrication and local labor rates can alter the totals.
| Quote item | Low | Typical | High |
|---|---|---|---|
| Security screen or steel door | $200 | $700 | $2,500+ |
| Frame, hinges, and basic hardware | $75 | $250 | $700 |
| Lock or multi-point upgrade | $50 | $200 | $600 |
| Installation labor | $200 | $450 | $900 |
| Removal and disposal | $50 | $125 | $300 |
Labor for a straightforward replacement commonly runs $200-$600, with about 2-5 hours of work. A carpenter or installer may charge $75-$125 per hour, or quote a fixed job rate. If the opening needs shimming, trim work, or a new frame, labor can exceed the basic range.
Ask for separate product, labor, hardware, and removal charges so competing quotes can be compared line by line.
How steel gauge, mesh, and custom sizing shift prices
Material and construction matter as much as the word “security” in a product listing. Powder-coated steel screen doors with standard mesh are generally less expensive than heavy-gauge steel entry doors or decorative iron units. Stainless security mesh and corrosion-resistant finishes can add hundreds of dollars, especially on wide or custom openings.
Size is a major threshold: a standard single door is usually the least costly, while openings wider than 36 inches, doors taller than 80 inches, or paired doors often require custom fabrication. Expect a 20%-50% increase for nonstandard sizing, depending on the design. A stronger frame, reinforced hinges, or a multi-point lock may add $150-$600. Compare frame strength and lock specifications, not just the door’s appearance or advertised security rating.
When installation becomes a larger carpentry job
A direct replacement in a sound, square frame is usually the least expensive installation. If the jamb is rotted, the masonry opening is uneven, or the door must swing differently, the work can become a repair or modification project. Frame replacement often adds $300-$900; masonry adjustment or substantial trim work may add $500-$1,500 or more.
Removal of an existing door typically costs $50-$300, depending on weight, disposal requirements, and whether the installer must remove a frame. Deliveries for heavy custom units may also carry a $75-$300 charge, particularly when stairs or limited access require extra handling. Have the installer inspect the opening before ordering a custom door to avoid costly fit changes.
Regional labor rates change the installed door total
Labor and delivery prices vary by local trade availability and travel distance. Large coastal cities and high-cost metro areas can run about 15%-30% above typical national pricing, while smaller markets may come in 10%-20% lower. Remote locations can reverse that advantage when contractors charge a travel fee or freight is expensive.
Custom ironwork may also be priced locally, so fabrication availability affects the comparison. A quote that is 20% higher is not automatically overpriced if it includes a stronger frame, custom measurements, delivery, and disposal. Compare written quotes for identical dimensions, materials, locksets, finish, and installation scope.
Three example quotes for common security door jobs
A basic screen-door replacement might include a standard 36-by-80-inch unit at $450, $300 for roughly 3 hours of labor, and $100 for old-door removal, totaling about $850. A mid-range steel entry door could cost $1,100 for the unit and hardware, $550 for installation, and $150 for removal, for a $1,800 total.
A custom iron door may list at $3,000, with $750 for installation, $200 for delivery, and $150 for removal, bringing the project to about $4,100. These examples assume a usable existing opening; frame repairs or upgrades are extra. The same door can produce very different totals when delivery, fit work, and disposal are treated differently.
Which upgrades and extras deserve a separate price
Optional charges can include a deadbolt or multi-point lock, upgraded mesh, a closer, custom paint, weatherstripping, and matching sidelights. Basic lock hardware may be included, but premium locks commonly add $100-$600. A custom color or finish may add $100-$400, while sidelights can add several hundred dollars or more depending on material and size.
For homes in coastal or humid areas, ask whether the frame, hinges, and finish are suitable for exposure. A cheaper untreated finish can require earlier maintenance or replacement. Check whether a manufacturer warranty covers finish, mesh, and hardware separately, and whether installation labor is covered. Price only the upgrades that address a specific security, weather, or durability need.
How to lower the security door price without cutting fit
Keep the opening size and swing unchanged when the existing frame is sound, choose a standard model instead of custom ironwork, and compare steel or aluminum options with equivalent hardware. Buying during a slower installation period may improve scheduling, though savings depend on local demand. Bundling removal and installation in one written quote can also prevent duplicate trip charges.
Measure only for planning; let the installer verify final dimensions before fabrication. Get at least three itemized estimates and confirm that each includes tax, delivery, disposal, lock hardware, and any frame work. Avoid paying for a premium lock or decorative finish that does not meet the home’s actual requirements. Preserving a sound frame and selecting standard sizing are often the most effective ways to control the final bill.