Shed door replacement cost usually ranges from $250 to $1,200 installed, with an average near $650 for a standard-size door and ordinary access. Door material, opening size, frame damage, hardware, and local labor rates can move the quote substantially; custom double doors or extensive repairs may cost more.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed single door | $250 | $650 | $1,200 | Standard 30-36-inch opening |
| Installed double doors | $500 | $1,050 | $2,000 | Typically 48-72 inches wide |
| Door materials only | $100 | $350 | $900 | Basic panel to custom-built door |
| Carpenter labor | $150 | $350 | $700 | Removal, fitting, and hanging |
What a standard 36-inch shed door replacement costs
A basic replacement for a 30- to 36-inch shed opening costs about $250-$700 for a prehung or ready-to-install door, standard hinges, and straightforward labor. Midrange projects commonly land around $500-$850 when the installer needs to trim the door, adjust the jamb, or add a latch and weather stripping. A custom wood door or a badly deteriorated opening can bring the bill to $1,200 or more.
Material-only prices commonly run $100-$300 for a basic wood or steel door and $250-$600 for a heavier-duty or made-to-measure unit. These figures assume no major rot, a level floor, and no electrical or structural changes. Assumptions: standard shed opening, ordinary access, common materials, and U.S. contractor labor. For a routine single-door swap, budgeting $500-$800 covers many typical installed jobs.
Where door, hardware, and carpenter charges appear
A written estimate should distinguish the door from removal and fitting labor. Hardware can be included or billed separately, while rot repair, delivery, and disposal are more likely to appear as additional charges. The ranges below are typical project components, not fixed national rates.
| Cost component | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Door or door kit | $100 | $350 | $900 | Basic panel through custom build |
| Labor | $150 | $350 | $700 | Removal, fitting, and installation |
| Hinges, latch, and trim | $25 | $90 | $220 | Hardware and modest finishing |
| Frame or sill repair | $0 | $150 | $500 | Limited rot or damaged jamb |
| Haul-away or delivery | $0 | $60 | $180 | Depends on distance and disposal |
Carpenter rates often fall around $50-$100 per hour, with a minimum service charge of roughly $100-$200 in some markets. Frame repair is the component most likely to turn a simple door quote into a larger carpentry job.
How opening width, framing, and materials change the quote
Opening dimensions affect both the door price and the amount of fitting work. A standard 30- to 36-inch single door is usually less costly than a 48- to 72-inch double-door set; widening an opening can add $300-$1,000 or more for framing, siding, and trim changes. Measure the rough opening, not just the old door panel, and give those dimensions to each estimator.
Material also matters. Basic plywood or utility-grade wood panels may cost $100-$250, while solid wood, steel, or weather-resistant composite options often run $250-$700 before installation. A warped jamb, soft sill, or rot extending more than 12 inches beyond the frame may require replacement lumber and more labor. Confirm whether the quote includes the rough-opening repair, not only the door slab.
Which shed-door choices can trim the installed price
Keeping the existing opening and choosing a stock-size door can avoid custom fabrication and structural work. A simple wood panel with standard hinges may cost $100-$250 for materials; decorative bracing, windows, locks, or a specialty finish can add $50-$300 or more. Compare material durability with the shed’s exposure to rain and sun before selecting the lowest-priced option.
Homeowners can reduce labor charges by clearing stored items, trimming plants away from the entry, and identifying the door’s swing direction before the installer arrives. Request separate prices for the door, hardware, frame repairs, and disposal, and compare at least two or three itemized estimates. Preserving a sound frame is often more economical than replacing the entire doorway.
How long a shed door swap takes and labor rates
A straightforward replacement typically takes one worker 2-4 hours, including removal, fitting, hanging, and basic cleanup. At $50-$100 per hour, labor commonly totals $150-$400 after travel or minimum charges. A second worker may be needed for heavy double doors, but the added help can shorten the handling time.
Rot repair, an out-of-square opening, or a custom door can extend the job to 5-8 hours or require a return visit. Weather can also affect exterior caulking and paint work. Ask whether the estimate includes sealing or finishing, since some installers price those tasks separately. Quotes based on a site visit are more dependable when the opening is uneven or damaged.
Single versus double shed doors and their price difference
A single door is usually the lower-cost choice for equipment that fits through a 30- to 36-inch opening. Installed pricing often falls around $250-$1,200, depending on material and frame condition. Double doors provide a wider opening for mowers or bulky storage, but the larger door set and additional hinges commonly raise the installed cost to $500-$2,000.
Replacing existing double doors with the same-size set is less expensive than converting a single opening to double doors. That conversion may require framing and siding work, adding roughly $300-$1,000 or more. A removable center stop or wider single door may work for some uses, but the opening and door structure need to support the change. Match the door width to the largest item that must pass through, rather than paying for unused clearance.
Three shed door quotes for common replacement jobs
A basic example is a 30-inch utility door in a sound frame: a $150 panel, $40 in hinges and latch, and about 2.5 labor hours at $65 per hour totals approximately $353 before tax or disposal. A standard 36-inch door with trim and minor adjustments might include a $350 door, $100 hardware and supplies, and 4 labor hours at $75, for about $750.
For a 60-inch double-door opening with a damaged sill, a $650 door set, $180 in hardware and lumber, and 7 labor hours at $85 totals about $1,425, before any haul-away fee. These examples assume ordinary access and locally available materials. Use the line items to compare scope, not just the final quote total.
When hinge or frame repair costs less than replacement
If the door panel is sound and the problem is a loose hinge, latch, or small area of rot, a repair may cost $75-$250. Replacing hinges or a latch alone can run $25-$100 in parts, plus a service minimum or hourly labor. A carpenter may charge $100-$300 to repair a limited section of jamb or sill, depending on access and finish work.
Replacement is more likely to make sense when the panel is swollen, split, badly warped, or repeatedly coming out of alignment. If rot has spread into the wall framing or the door no longer closes securely, request an inspection and an itemized repair-versus-replacement estimate. Paying for a small repair is worthwhile only when the remaining door and frame are structurally sound.