Sherwin-Williams Loxon XP typically costs about $65-$95 per gallon before discounts, with a five-gallon pail commonly priced around $300-$425. A full exterior masonry project can cost much more once surface preparation and painting labor are included; coverage, wall condition, local labor rates, and the number of coats shape the estimate.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Loxon XP, 1 gallon | $65 | $80 | $95 | Retail pricing; store discounts vary |
| Loxon XP, 5 gallons | $300 | $360 | $425 | Approximate pail price |
| Product per sq ft | $0.50 | $0.80 | $1.30 | One coat at 75-125 sq ft per gallon |
| Installed coating | $1.50 | $3.00 | $5.00 | Per sq ft; prep and access affect total |
What a Loxon XP pail costs for masonry walls
For budgeting, allow $300-$425 for a five-gallon pail, or roughly $65-$95 for a single gallon. These are practical U.S. retail ranges, not fixed national prices; Sherwin-Williams promotions, contractor accounts, location, and store inventory can change the amount. A gallon is often useful for touch-ups, while a pail may be more economical for a larger uninterrupted wall.
Product cost per square foot depends on the surface. At the manufacturer-listed spread rate of about 75-125 square feet per gallon, one coat costs approximately $0.52-$1.27 per square foot using the gallon price range above. Rough, porous block can use more material than smooth concrete. Assumptions: one coat, standard retail pricing, and coverage within the published spread-rate range.
How paint, prep, and labor shape the quote
A contractor’s quote may include cleaning, crack repair, masking, primer or patching where needed, application, and cleanup. The table separates common line items; not every project needs every charge. Surface repair and labor can exceed the coating’s purchase price.
| Quote item | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Loxon XP coating | $0.50-$1.30 | Per sq ft, one coat | Coverage and store price |
| Cleaning and masking | $0.25-$0.90 | Per sq ft | Soiling, windows, landscaping |
| Minor patching | $0.50-$2.50 | Per sq ft of affected area | Crack depth and repair area |
| Application labor | $1.00-$3.50 | Per sq ft | Access, wall texture, coats |
| Lift or scaffold | $150-$600 | Per day or setup | Height and site access |
Painting labor commonly runs about $40-$85 per hour per worker, but bids are often priced by area rather than by the hour. Confirm whether the estimate includes materials, repairs, and equipment.
Coverage changes with block texture and coat count
Loxon XP’s approximate 75-125-square-foot-per-gallon spread rate is a useful starting point, not a guarantee. Dense, smooth concrete may approach the higher end; porous or rough concrete block can fall near the lower end or require additional material. A second coat, if specified for the substrate or desired finish, roughly doubles coating use. Measure wall area and account for texture before converting pail price into a project budget.
For example, a 1,000-square-foot wall at 100 square feet per gallon requires about 10 gallons for one coat, before waste. At $65-$95 per gallon, that is approximately $650-$950 in paint. At 75 square feet per gallon, the same area takes about 14 gallons, or roughly $910-$1,330. Subtract large openings only when the painter’s measurement method does so.
Regional labor rates can move the installed price
Product pricing is relatively easy to compare, but labor differs by market. As a planning estimate, installed coating may run 10%-20% below the national midpoint in some rural or lower-cost areas, while dense coastal cities and high-cost metro markets can be 15%-35% above it. These are directional differences, not guaranteed local quotes.
Access can matter as much as geography. A one-story foundation with clear access may be straightforward; a tall wall, steep grade, or restricted work area can add lift rental, setup time, or crew hours. Compare bids for the same measured area and identical prep and coat requirements.
Three sample quotes for common wall sizes
These examples use one coat, average coverage of 100 square feet per gallon, and labor rates and prep appropriate to each scope. Actual contractors may specify different coverage or application methods.
| Project | Paint estimate | Labor and prep | Approximate total |
|---|---|---|---|
| 500 sq ft smooth foundation | 5 gal, $325-$475 | $600-$1,200 | $925-$1,675 |
| 1,000 sq ft block exterior | 10 gal, $650-$950 | $1,250-$2,600 | $1,900-$3,550 |
| 1,800 sq ft rough masonry | 18-24 gal, $1,170-$2,280 | $2,700-$5,500 | $3,870-$7,780 |
Assumptions: one coat, normal access, no major crack remediation, and paint priced at $65-$95 per gallon. Rough surfaces may use more gallons than shown, and a second coat can increase material and application charges substantially.
When cleaning, repairs, or extra equipment add fees
Pressure washing or other cleaning may add around $0.15-$0.50 per square foot when it is not included in the painting bid. Extensive efflorescence, peeling coatings, active moisture, or failed mortar joints may require diagnosis and repair before painting; repairs can add hundreds or several thousand dollars depending on area and severity.
Lift rental can add roughly $150-$600 per day, with delivery or minimum rental charges in some markets. A contractor may also charge for moving patio items, protecting nearby surfaces, or working around dense landscaping. Ask for these items as separate quote lines rather than accepting an unexplained allowance.
How to lower Loxon XP project spending
Measure the wall area carefully and ask the store or contractor to estimate gallons using the actual substrate, rather than assuming best-case coverage. Buying a five-gallon pail can lower the per-gallon price, but extra paint is only a saving if it can be stored correctly and used before its condition changes.
Complete practical site preparation, such as moving outdoor furniture, when the contractor agrees it is safe and does not conflict with surface preparation. Request separate prices for cleaning, repairs, and coating; compare quotes that specify the same coat count and repair scope. Avoid paying for a second coat or premium add-ons unless the product instructions, substrate, or project requirements call for them. The most reliable savings come from limiting unneeded work, not skipping repairs that protect the finish.
Is Loxon XP cheaper than basic masonry paint
Basic masonry paint can have a lower purchase price, often about $25-$55 per gallon, while higher-performance masonry coatings may cost $65-$100 or more per gallon. The lower shelf price does not settle the comparison: coverage, required primer, surface condition, and expected maintenance all affect the cost over time.
Compare the product labels and written specifications for the intended masonry and exposure, and confirm whether a primer is required. If moisture intrusion or structural cracking is present, coating alone may not solve the underlying issue. Choose by suitability for the wall and stated application requirements, not by gallon price alone.