Silestone Eternal Statuario countertops typically cost $75-$150 per square foot installed, with many standard kitchens landing around $3,500-$7,000. Slab selection, countertop area, sink and cooktop cutouts, edge profile, removal, and local fabrication rates drive the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed countertop | $75 per sq ft | $110 per sq ft | $150 per sq ft | Material, fabrication, and installation; project minimums may apply |
| Material only | $50 per sq ft | $75 per sq ft | $100 per sq ft | Dealer pricing varies by slab and market |
| Small vanity, 10 sq ft | $750 | $1,100 | $1,500 | Before plumbing changes or removal |
| Kitchen, 40 sq ft | $3,000 | $4,400 | $6,000 | Typical layout, standard edge, normal access |
What Eternal Statuario countertops cost installed
For a straightforward job, a useful planning range is $75-$150 per square foot for finished counters. The lower end usually reflects a smaller, uncomplicated layout in a lower-cost market; the upper end can reflect premium slab pricing, complex fabrication, higher labor rates, or added work. A 30-square-foot kitchen run might total $2,250-$4,500, while 50 square feet could cost $3,750-$7,500 before optional removal or plumbing work.
These are budgeting estimates, not a manufacturer-set retail price. Silestone is a branded engineered-quartz surface, and Eternal Statuario is a particular design in its collection. Dealers and fabricators may quote the slab, fabrication, and installation as a package, so the per-square-foot figure does not always identify each charge separately.
For a standard 40-square-foot kitchen, about $4,400 is a reasonable midpoint before extras. Assumptions: standard thickness, ordinary countertop layout, one sink cutout, finished edge, and typical U.S. fabrication and installation.
How slab, fabrication, and installation appear in a quote
A complete estimate should distinguish the surface from the labor and shop work. Some fabricators calculate by finished square foot, while others price the slab, template, cutouts, and installation as separate line items. Confirm whether the quote includes tax, delivery, seam placement, backsplash, and removal of existing counters.
| Quote component | Typical range | Pricing basis | What to verify | Possible extra |
|---|---|---|---|---|
| Silestone material | $50-$100 per sq ft | Slab or estimated finished area | Design, thickness, and usable slab yield | Full-slab purchase requirement |
| Template and fabrication | $15-$35 per sq ft | Shop labor and cutting | Cutouts, seams, and edge detail | $100-$300 per specialty cutout |
| Installation labor | $10-$25 per sq ft | Crew time and site access | Delivery, placement, and leveling | $150-$500 for difficult access |
| Removal and disposal | $5-$15 per sq ft | Existing counter area | Material type and haul-away | Plumbing disconnection |
| Backsplash and accessories | $15-$40 per linear ft | Finished length | Height, seams, and matching material | Extra fabrication |
Ranges in the table are broad U.S. estimates and do not necessarily add directly to a contractor’s per-square-foot package. Minimum charges, slab yield, and how a shop allocates fabrication labor can change the math.
Ask for a written breakdown that identifies what is included in the installed rate. A low headline price may exclude template fees, sink cutouts, tear-out, delivery, or tax, while another quote may include those items in a single total.
Why slab yield, thickness, and cutouts change the price
Countertop area matters, but slab layout matters too. A fabricator must fit each counter piece onto the slab while allowing for seams, edges, and the design pattern. A kitchen needing 40 square feet of finished surface may require more material than 40 square feet of slab area, especially when the layout has long runs or an island. A dealer may charge for a whole slab or allocate only the material used; ask which method applies.
Standard 2-centimeter and 3-centimeter options, where available for the selected product, can have different material and edge requirements. A thicker visual edge may be built up with a mitered or laminated strip, adding shop time and material. Detailed edges can cost more than a simple eased edge, commonly adding roughly $10-$30 per linear foot depending on profile and local pricing.
Cutouts also add work. A standard sink opening may add about $100-$300, while a cooktop opening can add a similar amount, depending on reinforcement, finish, and shop policy. A faucet hole may be included or charged separately, often around $25-$75. A layout with two sinks, multiple cooktops, or several seams can therefore exceed a simple kitchen estimate.
Measure both square footage and linear footage, then list every opening and finished edge. Assumptions: figures are estimates for typical shop fabrication; unusual shapes, fragile sections, and complex seam matching may cost more.
How location and access affect installed pricing
Labor, dealer availability, and transport make Eternal Statuario pricing regional. In major coastal metros and other high-cost urban markets, installed quotes may run 10%-25% above a national midpoint. Smaller cities and rural areas may be 5%-15% below it, but fewer local fabricators or longer delivery distances can offset that difference.
Access can matter as much as the city. A ground-floor kitchen with a nearby loading area is usually simpler than a high-rise unit with elevator reservations, long carries, narrow stairs, or limited work hours. Difficult access can add about $150-$500 or more, depending on crew time and equipment needs. Long-distance delivery may add a separate fee, particularly when the slab or finished pieces travel from outside the local service area.
Compare quotes from local fabricators using the same scope, not just the same price per square foot. For an accurate comparison, ask each company to include delivery, access conditions, cutouts, removal, and installation in its total.
How much do countertop labor and installation take?
Most uncomplicated countertop jobs require a template visit followed by fabrication and a separate installation appointment. The template visit may take one to two hours, while a typical installation crew may spend three to six hours on site for a standard kitchen. Fabrication commonly takes several business days to a few weeks after final measurements, depending on shop workload, slab availability, and project complexity.
Labor rates vary by market and company. As a budgeting reference, skilled countertop-related labor may be priced around $50-$100 per worker-hour, but installed quotes often use a package rate instead of hourly billing. A two-person crew working four hours represents eight labor hours; at $50-$100 per hour, direct labor alone would be $400-$800, before fabrication-shop work, transport, overhead, and materials.
Installation may take longer when a kitchen has a large island, several seams, heavy pieces, or tight access. Cabinets that are out of level can require correction before the surface is placed. Plumbing reconnection may be handled by a separate licensed trade, and electrical work for a cooktop may also be excluded from the countertop contract.
Confirm the expected template date, fabrication lead time, and installation duration before scheduling removal. Removing old counters too early can leave the kitchen unusable if fabrication or delivery is delayed.
Three realistic Eternal Statuario quote examples
The examples below illustrate how scope changes a quote. Actual estimates depend on local labor, slab yield, fabricator policies, and taxes. The per-square-foot figures are approximate totals divided by finished countertop area, not guaranteed retail rates.
| Project | Scope | Estimated total | Approx. installed rate |
|---|---|---|---|
| Bathroom vanity | 10 sq ft, one sink cutout, simple edge, no removal | $900-$1,500 | $90-$150 per sq ft |
| Compact kitchen | 30 sq ft, one sink and one cooktop cutout, standard edge | $2,700-$4,200 | $90-$140 per sq ft |
| Kitchen with island | 55 sq ft, two cutouts, island seams, old counter removal | $5,500-$9,000 | $100-$164 per sq ft |
The vanity has a higher unit rate because small jobs often face minimum charges, even when they use less material. The kitchen with island may need additional slab yield, handling, and seam work. Removal can add several hundred dollars, and a large island may require more than a basic installation crew.
Use the project total alongside the unit price when comparing a small job with a full kitchen. A low per-square-foot rate can still result in a higher bill if the quote includes more services, while a low total can omit substantial work.
Where to trim a Statuario countertop budget
Keep the layout simple where practical. Fewer corners, seams, and cutouts reduce shop labor and can improve slab yield. If an island design can be adjusted to use standard slab dimensions without compromising function, compare the revised layout with the original. Avoid specifying a decorative edge on every exposed side unless the profile is important to the finished look.
Ask whether the fabricator can use a remnant for a vanity, laundry counter, or small secondary surface. A remnant may lower the material bill, but Eternal Statuario must match the intended project and the shop must have usable stock. Check that a remnant quote includes fabrication and installation rather than material alone.
Compare at least three written quotes based on identical measurements, material thickness, edge profile, cutouts, backsplash, removal, and tax. A quote should state whether the customer pays for a full slab or only allocated material. If the existing counters are already removed, confirm that doing so will not eliminate a service or warranty obligation required by the installer.
Save through simpler fabrication and clear scope rather than choosing an unverified substitute slab. Before signing, confirm the exact Eternal Statuario product and finish, since similar names or designs may not have the same appearance or price.
How Eternal Statuario compares with other countertop choices
Silestone Eternal Statuario is generally a premium engineered-quartz choice, but the final comparison depends on the competing material and the installed scope. Standard quartz designs may come in around $60-$120 per square foot installed, while other premium patterns can overlap or exceed that range. Natural marble often ranges roughly $70-$160 per square foot installed, with higher costs possible for premium stone, complex fabrication, or scarce varieties.
Granite commonly falls around $50-$120 per square foot installed, though grade, slab selection, edge work, and region produce substantial variation. Laminate can be a lower-cost alternative, often about $20-$60 per square foot installed, but it does not provide the same stone-like slab appearance or fabrication characteristics. These ranges are broad comparisons, not direct product equivalencies.
When comparing, include more than the initial rate. Ask about care instructions, warranty coverage, heat exposure precautions, repair procedures, and whether the installer’s workmanship is covered separately. A cheaper surface may have different appearance, maintenance needs, or resale appeal; a more expensive quote may include removal, backsplash, and a longer workmanship warranty.
Compare installed totals and included services before deciding whether the Statuario premium fits the budget. A like-for-like comparison uses the same countertop area, edge, openings, backsplash height, removal scope, and tax treatment.