A used Skilsaw Model 3400 typically sells for about $50-$200, with a clean, working saw often priced near $125. Condition, included stand and fence, local demand, and whether the saw needs parts or repair have the biggest effect on its price; the model is discontinued, so listings are mainly for used units.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used Model 3400 saw | $50 | $125 | $200 | Working condition; price varies with completeness |
| Needs repair or parts | $20 | $50 | $90 | May have motor, switch, alignment, or missing-part issues |
| Clean, complete local listing | $100 | $150 | $225 | Includes usable fence and stand when supplied |
| Replacement 10-inch blade | $20 | $35 | $60 | Price depends on tooth count and blade type |
What a working Skilsaw 3400 usually sells for
For a typical used Model 3400 in operating condition, a reasonable private-sale range is $75-$175. A practical midpoint is around $125 when the saw starts reliably, cuts, and includes its fence and basic accessories. A heavily worn unit or one sold as-is may bring $20-$75, while a clean, complete example can reach $175-$225 in a market with few comparable listings.
Budget about $100-$150 for a usable saw, then inspect it before treating the asking price as fair. These are used-market estimates, not a current retail price: the 3400 is an older model and buyers should compare local listings rather than assume a consistent national value.
Assumptions: U.S. private-party sale, ordinary wear, working motor, and no major missing components.
How the fence, blade, repairs, and pickup affect the quote
A seller’s price reflects more than the motor. A complete fence, stable stand, blade guard, and miter gauge make a used saw more ready to use. Missing parts can be difficult to source for an older model, so buyers should identify what is absent before negotiating. Replacement blades are common, but specialized or model-specific parts may not be.
| Price component | Typical amount | What changes the amount |
|---|---|---|
| Used saw and motor | $50-$150 | Starts, runs smoothly, and maintains speed |
| Fence and basic accessories | $0-$40 added value | Completeness and straight, secure adjustment |
| Replacement blade | $20-$60 | General-purpose versus higher-tooth-count blade |
| Repair labor | $50-$100 per hour | Local shop rate and fault diagnosis |
| Pickup or delivery | $0-$60 | Distance, loading help, and seller terms |
A low asking price can stop being a bargain if repairs and missing parts add $75 or more. For shop repair estimates, labor is often calculated as ; parts and any diagnostic fee may be separate.
Which 10-inch saw condition details change the price most?
Test the saw with the blade unplugged first, then operate it only if it appears safe. A motor that starts consistently without unusual noise is more valuable than one that stalls or trips a breaker. Check whether the blade sits square to the table and whether the fence locks parallel to the blade. Visible rust, a damaged power cord, cracked housing, or a loose arbor can justify a lower offer or a decision to walk away.
Completeness is another measurable price driver. A missing fence or stand can reduce value by roughly $20-$50 compared with a similarly clean complete unit. A dull or damaged 10-inch blade may require another $20-$60. If the arbor, motor, or major cast parts need work, repair costs can exceed the saw’s resale value, especially when parts availability is uncertain.
Pay more only for verified function and useful included parts, not for a seller’s claim that the saw is collectible. Confirm the model plate says 3400 and ask for a demonstration of the switch, blade elevation, and fence adjustment.
How used 3400 prices compare with newer table saws
A Model 3400 can be an inexpensive option for occasional cutting, but the purchase price is only one part of the comparison. A newer entry-level portable 10-inch table saw commonly costs about $250-$500 new, with warranty coverage and easier access to replacement parts. Used alternatives from other brands often list around $100-$300 depending on age and included accessories.
For a buyer who needs regular accuracy, a newer saw may be worth the additional $100-$350. For occasional rough cuts, a working 3400 at $75-$125 may cost less overall. Compare fence stability, safety equipment, and blade alignment rather than choosing by motor size or brand name alone.
Choose the 3400 when its condition is proven and the discount remains substantial after any blade or repair expense.
When repair costs outweigh the Model 3400 purchase price
Basic cleaning and a replacement blade may be reasonable expenses, but motor or arbor repairs deserve a written estimate. A service shop may charge $50-$100 per hour, and a one-hour diagnosis plus parts can quickly approach the price of another used saw. A broken switch may be relatively manageable if a compatible part is available; a failed motor or damaged table assembly can make replacement more sensible.
Set a repair ceiling before buying. For a $100 saw, keeping expected parts and labor below roughly $50-$75 leaves more room for uncertainty. Ask whether the estimate includes diagnosis, parts, and testing, and whether the repair carries any shop warranty.
Do not pay a working-saw price for an untested unit with a major electrical or mechanical fault. Treat “powers on” as different from “cuts safely and accurately.”
Does location or pickup change the used saw price?
Prices are often higher in dense metro areas where local demand and replacement-tool costs are greater; rural listings may be 10%-20% lower but offer fewer choices. Condition and completeness usually matter more than region, and asking prices can differ from final sale prices. Local pickup is generally the cheapest option because shipping a heavy table saw can add $50-$150 or more, if a seller will ship it at all.
Inspect the saw before arranging transport. Confirm its approximate dimensions, weight, and whether the stand folds or detaches. If pickup requires a second person or a truck rental, include those costs in the offer instead of comparing only the listing price.
Use nearby completed or recently removed listings as a better benchmark than distant asking prices.
How to negotiate a fair price on a Skilsaw 3400
Ask for the exact included parts and a short operating demonstration before making an offer. Compare at least a few local listings, then adjust for a missing fence, damaged cord, rust, or a blade that needs replacement. A $150 asking price may be reasonable for a clean, complete, tested saw; the same price is difficult to justify for an untested unit without accessories.
Keep the offer tied to documented costs. If a blade and pickup together add $50, an offer near $75-$100 may make more sense than paying the full asking price. Avoid buying without checking the blade guard and other safety components, particularly if replacement parts cannot be confirmed.
For most buyers, a verified, complete Model 3400 below $150 is the strongest value; above $200, compare newer used saws first.