Sliding wardrobe doors typically cost $400-$2,400 for a standard closet, with custom glass or large-format systems reaching $4,000 or more. The final price depends mainly on door width and height, panel material, track quality, installation labor, and whether the old doors or frame need removal.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Doors and track | $250 | $850 | $2,400 | Typical two- or three-panel set |
| Professional installation | $150 | $400 | $900 | Standard opening, no major repairs |
| Installed project total | $400 | $1,250 | $3,300 | Custom sizes and premium panels can exceed this |
| Price per opening | $200 | $625 | $1,650 | Based on a typical 6- to 8-foot opening |
What sliding wardrobe doors cost for a standard closet
For a 6-foot-wide opening with standard-height panels, a basic mirrored or melamine set costs about $250-$700 for materials. Midrange framed glass, wood-look, or upgraded mirror panels commonly cost $700-$1,500, while custom finishes, soft-close hardware, and oversized panels can put materials at $1,500-$2,400.
With professional fitting, a straightforward project is often $600-$1,500 total. Custom openings, premium panels, or frame repairs can raise the bill to $2,000-$3,300 or more. Assumptions: U.S. average labor, a sound opening, standard track, and a 6- to 8-foot-wide closet. Most buyers budgeting for a standard installed set should allow about $900-$1,600.
How panels, tracks, and fitting shape the quote
Quotes may combine door panels and hardware or list them separately. The table shows typical ranges for a standard opening; custom fabrication and regional labor rates can change each line.
| Quote item | Low | Average | High |
|---|---|---|---|
| Melamine or basic laminate panels | $150 | $400 | $800 |
| Mirrored or framed glass panels | $300 | $850 | $1,800 |
| Top and bottom track, rollers, handles | $60 | $180 | $450 |
| Installation labor | $150 | $400 | $900 |
| Removal and disposal of old doors | $40 | $120 | $300 |
Panel material and finish usually create the largest product-price difference. Check whether the quote includes tracks, rollers, handles, delivery, and removal before comparing totals.
Panel width, height, and material change door prices
Opening dimensions affect both panel count and the need for made-to-measure doors. A 4-foot opening may use a simpler two-panel setup, while an 8-foot opening often needs larger panels or three doors to provide practical access. Custom sizing commonly adds 15%-40% over stock pricing, especially when the opening is unusually tall or out of square.
Basic melamine or laminate panels are generally the least expensive. Mirrored panels cost more and require careful handling; decorative glass, solid-wood details, and specialty finishes can push the door package above $2,000. A soft-close mechanism may add roughly $80-$250, depending on the number of panels and hardware grade. Measure the finished opening at the top, middle, and bottom because even a ½-inch variation can affect fit and installation time.
How long installation takes and what labor includes
A replacement in a level, prepared opening usually takes one installer 2-4 hours. A new track, uneven floor, trim changes, or custom adjustments can extend the visit to 4-8 hours or require a second worker. Carpenter or door-installer rates commonly run $60-$110 per hour, with minimum service charges of about $100-$200 in some markets.
Labor typically covers removing existing panels, setting and securing tracks, hanging doors, and adjusting rollers. Repairing a damaged jamb, leveling a floor, or altering trim may be priced separately. Ask for labor hours and the included preparation work, not just a single installation fee.
Regional labor rates shift installed wardrobe door prices
Labor and delivery can make the same door package cost different amounts across the country. Large coastal cities and high-cost metro areas may run 15%-30% above a national-average estimate. Smaller cities and rural locations can be 5%-15% below average, although travel charges or limited installer availability may erase the savings.
For a standard installed project averaging $1,250, that regional spread could mean roughly $1,440-$1,625 in an expensive metro or $1,060-$1,190 in a lower-cost market. These are planning ranges rather than fixed local quotes; custom door availability and shipping distance also matter. Compare at least two local estimates using the same opening dimensions and panel specification.
Removal, delivery, and uneven openings add extra charges
Old door removal and disposal may cost $40-$300, while delivery can add $50-$200 for bulky panels or a distant drop-off. If the floor or header is not level, a carpenter may charge $100-$500 to shim, repair, or adjust the opening. Replacement track hardware alone can cost $60-$450, depending on length and roller quality.
Mirrored or glass doors may incur higher handling fees, and upstairs access can add labor when panels are difficult to carry. Some installers charge a $75-$150 measurement or service fee, sometimes credited toward the job. Confirm access, delivery, disposal, and opening repairs in writing so the estimate accounts for the full job.
Stock panels versus custom glass or hinged doors
Stock sliding panels are usually the lowest-cost option when the opening matches common widths and heights. Custom sliding doors make sense when dimensions or appearance are unusual, but the added fabrication can raise the material bill by hundreds of dollars. Hinged doors may have a lower purchase price, though they need clear floor space and can require different framing or hardware.
For a 6-foot closet, a basic stock sliding set with installation may total $600-$1,100; a custom mirrored system may land around $1,400-$2,800. Repairing a loose track or replacing rollers can cost $100-$350 and may be preferable when panels remain in good condition. Compare repair and replacement quotes before paying for a complete new door set.
Lower the wardrobe door bill with measured scope
Accurate measurements can prevent custom-order fees and costly returns. Keep the existing opening and trim if they are sound, choose standard panel sizes, and avoid decorative glass or upgraded finishes that do not improve function. If only one panel or the rollers are damaged, request a repair price alongside the replacement estimate.
Scheduling several small carpentry tasks together may reduce separate trip charges, while buying panels and installation as one package can clarify responsibility for fit. Do not choose solely by the lowest bid: verify panel thickness, track material, roller type, warranty, and disposal terms. The best savings usually come from standard dimensions, usable existing framing, and a quote with clearly defined inclusions.