Prices for solid oak interior doors vary by size, design, and finishing. This article presents clear cost ranges and the main drivers behind the price, including material quality, door thickness, and hardware choices. The keyword appears naturally in context to help readers planning a purchase.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Solid oak interior door (32″ x 80″, 1-3/8″ thick, unfinished) | $180 | $260 | $360 | Std thickness, unfinished |
| Solid oak interior door (32″ x 80″, prefinished) | $240 | $320 | $420 | Factory finish included |
| Solid oak interior door (30″ x 80″, prehung with hinge) | $350 | $420 | $520 | Prehung option adds labor |
| Hardware kit (knob, strike, hinges) per door | $25 | $45 | $90 | Quality hardware varies |
| Assembly/installation (new opening, per door) | $150 | $250 | $480 | Labor varies by locale |
Solid Oak Interior Door Price Range by Size and Style
Typical price spreads depend on door size, thickness, and style choice. A basic 32-inch by 80-inch door in 1-3/8-inch thickness without finish costs around $180-$260, while a prefinished model runs $240-$320. Heavier or thicker designs, such as 1-3/4-inch solid cores, push to $320-$460 for a plain stile-and-rail profile. Custom panel configurations or arched tops can raise prices further, often adding $60-$180 per door for fabrication.
Per-Unit Price Drivers That Matter for Oak Doors
Material grade and finish level drive the per-unit cost more than most buyers expect. Unfinished doors start lower, while factory-burnished finishes, staining, and prefinished coats reduce post-install work. For standard 32″ x 80″ doors, expect $180-$260 unfinished, $240-$320 prefinished, and $320-$460 for more detailed panels or thicker cores. Per-door hardware and hinges typically add $25-$90 per unit.
Cost Breakdown: Materials, Labor, and Hardware
Understanding major cost components helps buyers compare quotes. The quote usually splits into Materials (oak panel, veneer, core), Labor (fabrication, finishing, installation), and Hardware (hinges, knobs/links, weatherstripping). In a typical project, materials run $140-$320, labor $120-$260 for standard hanging and fitting, and hardware $25-$90 per door. A combined budget often lands between $350 and $760 per door depending on options.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (oak, core, veneer) | $140 | $230 | $320 | Species and grade impact this band |
| Labor (fabrication, finishing) | $120 | $200 | $260 | Includes minor prep |
| Hardware and accessories | $25 | $45 | $90 | Knob, strike, hinges |
| Finishing and protective coating | $0 | $20 | $60 | Optional for unfinished doors |
Regional Price Variation for Oak Doors
Prices shift by region due to labor costs and availability. In the U.S., Midwest markets typically see lower installed price ranges than West Coast or Northeast markets. A standard 32″ x 80″ prehung oak door may cost $340-$420 in the Midwest, while the same door can run $420-$520 in coastal regions with higher labor rates. Rural areas often sit near the lower edge of the national ranges, whereas urban centers skew higher by 10-20% for installation.
Labor Time and Install Scope That Affect the Quote
Time on site and project complexity drive labor charges. A straightforward replacement for a single prehung door typically takes 2-4 hours, translating to roughly $150-$250 in labor at typical hourly rates. If a rough opening needs adaptations, trim work, or a new jamb, labor can rise to 5-8 hours, or $300-$520. For a full door package including multiple units or alignments, plan for higher totals per door.
Impact of System Type: Solid Core vs Hollow Core
Core type is a major cost lever. Solid oak doors or solid-core with oak veneer start around $180-$260 for 32″ x 80″ unfinished, but solid-core options with premium finish or full-oak panels commonly land at $320-$460. Hollow-core variants stay in the $120-$180 range, but do not offer true solid oak heft or sound dampening benefits.
Finishing Options and Their Pricing Effect
Finish choices noticeably affect final cost. Unfinished doors require staining or painting after install, typically $0-$60 worth of additional work if DIY, or $60-$150 if a shop coats and ships prefinished. Prefinished doors save labor time and generally cost $60-$120 more upfront than unfinished equivalents, depending on the coating quality and sealant used.
Cost Impacts From Hardware Choices
Hardware selection adds predictable, repeatable costs. Standard hinges and a basic round knob might add $25-$60 per door, while premium handles, decorative hinges, and smart-lock-ready hardware can add $60-$90 or more per door. If a locksmith installation is required or new strike plates are needed, factor in an additional $20-$40.