A Speed Queen washer and dryer set typically costs about $3,000-$4,500 before delivery, installation, and sales tax, with higher-end or front-load pairs sometimes exceeding that range. Model choice, local dealer pricing, haul-away, and installation requirements drive the final bill.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Washer and electric dryer pair | $2,800 | $3,700 | $5,000 | Appliance prices before tax and installation |
| Washer alone | $1,300 | $1,800 | $2,500 | Top-load models usually cost less than front-load |
| Dryer alone | $1,300 | $1,800 | $2,500 | Gas and feature differences affect price |
| Delivery and basic installation | $150 | $300 | $600 | Excludes major vent, electrical, or plumbing work |
What a Speed Queen washer and dryer pair costs
For a standard electric laundry setup, a practical budget is $3,000-$4,500 for the appliances, with a typical pair landing near $3,700. This estimate generally assumes a current residential top-load washer and matching electric dryer purchased through an authorized U.S. dealer. Regional prices, promotions, model availability, and whether the quote includes accessories can change the total.
Speed Queen set prices vary by series and configuration. Entry or midrange top-load pairs are often less expensive than premium top-load models with additional wash features. A front-load pair commonly costs more than a basic top-load pair, while gas-dryer versions may carry a different appliance price and require a compatible gas connection.
For a straightforward replacement, allow roughly $3,300-$4,900 after ordinary delivery, basic hookup, and tax. That assumes existing connections are serviceable and the retailer does not charge for unusual access or construction. Sales tax depends on the state and locality; applying a rough 6%-10% rate to a $3,700 appliance quote adds about $220-$370.
Assumptions: U.S. dealer pricing, a matched residential washer and dryer, standard access, and no major utility or vent modifications.
How washer, dryer, delivery, and hookup charges stack up
A dealer quote should distinguish the two machines from delivery and installation. The appliance line may include a basic manufacturer warranty, but not necessarily hoses, a new dryer vent, stacking equipment, or removal of the old pair. Ask whether the quoted set price is for the exact washer and dryer model numbers, not simply a series name.
| Quote component | Typical range | What it covers | Price detail |
|---|---|---|---|
| Speed Queen washer | $1,300-$2,500 | Residential top-load or front-load unit | Approximately $1,300-$2,500 per washer |
| Speed Queen dryer | $1,300-$2,500 | Matching electric or gas dryer | Approximately $1,300-$2,500 per dryer |
| Delivery and placement | $75-$200 | Local drop-off and moving into laundry area | More for stairs or difficult access |
| Basic hookup | $75-$200 | Connects to usable water, drain, power, or gas points | May be bundled with delivery |
| Hoses, vent, or cord | $25-$150 | Replacement connections or a standard vent component | Special venting can cost more |
| Old-unit haul-away | $25-$100 | Removal of one or both existing appliances | Some dealers include it in promotions |
Basic installation assumes the appliances fit through the route and existing shutoff valves, outlet, drain, and vent meet local requirements. A new 240-volt circuit, gas piping, vent rerouting, or plumbing repair is not ordinary hookup work and may require a separate contractor quote.
Installation and removal commonly add $150-$450 before tax, but complicated utility work can raise the bill substantially. If the set is stacked, confirm that the models permit stacking and that the required kit is included in the estimate.
Typical labor planning: 1-2 hours for a basic pair hookup at roughly $75-$125 per hour when charged separately.
Which model series and dryer type change the price?
The model combination is the largest appliance-price variable. A simpler top-load setup usually provides the lowest entry point, while upgraded top-load models and front-load machines tend to increase the combined price. Feature packages, control design, capacity, and current dealer inventory can also shift pricing. Model names and specifications can change, so a quote should list the complete model numbers.
- Basic top-load pair: roughly $2,800-$3,600 for the two appliances, before delivery and tax. This is a useful lower-price benchmark when the buyer wants a conventional washer and electric dryer.
- Upgraded top-load pair: about $3,400-$4,500 before add-ons. More wash options or upgraded controls can increase the washer price.
- Front-load pair: commonly $3,800-$5,000 before installation and tax, depending on the model and dealer. Confirm whether a stacking kit is included if vertical placement is planned.
- Gas dryer configuration: compare the dryer’s price separately with the electric version. Any price difference is only part of the cost if the laundry room lacks an existing gas line.
Capacity and the room’s layout matter as much as feature preference. Measure doorways, stair turns, and the laundry alcove before ordering; a return or exchange after delivery can trigger restocking or redelivery charges. Check the washer’s dimensions and the dryer’s vent direction against the actual installation space.
Choosing a standard top-load configuration can keep the appliance subtotal several hundred dollars below a premium or front-load pair. The least expensive set is not automatically the lowest-cost solution if it requires new venting, a gas conversion, or costly access work.
When do capacity, venting, and site conditions add to the quote?
Several specific conditions can move a quote beyond ordinary appliance pricing. A dryer that must vent through a long or obstructed route may need a vent specialist. If the existing duct exceeds the manufacturer’s permitted equivalent length, a shorter route or approved vent configuration may be necessary. The contractor should inspect the path rather than assume that a longer duct will work.
- Existing connections: A usable water supply, drain, dryer outlet, and code-compliant vent support basic hookup. Replacing shutoff valves or correcting a drain issue can add roughly $100-$400, depending on parts and access.
- New electrical work: A new 240-volt dryer circuit can cost around $300-$1,000 or more, depending on panel capacity, wire distance, and wall access. A panel upgrade can raise that figure substantially.
- Gas connection: Adding or extending gas piping may cost about $200-$800 when the route is accessible; difficult routing or permit requirements can push it higher.
- Long vent or roof exit: A basic vent replacement may be $100-$300, while rerouting through finished walls or a roof can reach $300-$900 or more.
- Restricted access: Stairs, narrow turns, long carries, or a second-floor laundry room can add $50-$250 or require a specialty delivery crew.
Space should be checked against the manufacturer’s installation clearances, not just the appliance’s width. A pair that barely fits may still need room for hoses, the dryer vent, door swing, and service access. Measure the complete delivery route as well as the final alcove.
A site check before purchase can prevent a surprise $300-$1,000 electrical, gas, or venting bill. If a quote includes construction work, request separate line items for the appliance installation and the licensed trade work.
How much do delivery crews and installers charge?
Basic delivery may be free during a retailer promotion or cost approximately $75-$200. Standard installation for both appliances often falls around $75-$200 when the existing utilities are ready. Some sellers combine delivery, placement, connection, and haul-away into one package, so compare what each fee actually includes rather than comparing the headline number alone.
A two-person delivery crew is typical for moving a washer and dryer safely. The on-site portion may take 1-2 hours when access is uncomplicated and connections are in good condition. A longer visit is more likely when the crew must disconnect old units, navigate stairs, adjust a door, or install a replacement vent. Retail installation services generally do not include extensive electrical, plumbing, or gas alterations.
Confirm whether the team will remove the shipping materials, level the washer, test both machines, and take away the old set. If a retailer’s installer cannot complete the hookup because of an unsafe outlet or damaged valve, a return trip may involve another service charge. An independent licensed electrician or plumber may charge $75-$125 per hour, often with a service-call minimum.
Request a written, all-in delivery quote that names the number of appliances, hookup tasks, and haul-away charge. A low delivery price can be less economical if basic connections or old-unit removal are billed separately.
Speed Queen prices in urban, suburban, and rural markets
National online prices are only a starting point because many buyers purchase through local appliance dealers. A broad regional budget adjustment is more useful than treating one advertised price as universal. In high-cost metro areas, delivery labor and installation can be around 10%-20% above a typical market; suburban pricing is often near the baseline, while rural delivery may be 5%-15% higher when travel distance or limited scheduling adds cost.
Those percentages apply mainly to local service and logistics, not necessarily to the machines themselves. A dealer with limited inventory may quote more for a particular model, while another retailer may offer a discount on a stocked pair. Freight, availability, and promotions vary, and advertised prices may exclude delivery or installation.
For a $3,700 appliance pair, a 10%-20% metro premium on a combined service bill of $300-$500 would add about $30-$100, not 10%-20% of the full appliance price. Rural buyers should ask whether travel fees apply and whether the crew provides installation in the delivery zone. Local sales tax remains separate from both appliance and service charges.
Compare complete local quotes using the same model numbers and service scope. A dealer’s slightly higher appliance price may still produce a lower total if delivery, hookup, and removal are included.
Real Speed Queen quotes for three laundry-room setups
These sample budgets illustrate how the total changes with model tier and site conditions. They are planning examples, not fixed dealer offers; actual pricing depends on location, inventory, tax, and the contractor’s scope.
| Example setup | Appliances | Labor and extras | Estimated total before tax |
|---|---|---|---|
| Basic top-load electric pair, direct replacement | $3,050 | $250 delivery, hookup, and haul-away | $3,300 |
| Upgraded top-load set, replacement hoses and vent | $3,850 | $400 delivery, hookup, vent, and removal | $4,250 |
| Front-load set with new vent route | $4,500 | $650 delivery, hookup, and vent work | $5,150 |
In the first example, the machines arrive through an easy route and connect to existing utilities. The second assumes a more feature-rich washer and additional replacement parts. The third includes a more expensive set and a moderate venting adjustment; it does not include a new electrical circuit or structural work.
For a simple labor estimate, two installers working 1.5 hours at $100 per hour would represent $300 in labor before any delivery charge or parts. Many retailers use flat fees instead, so the hourly calculation is a comparison tool, not a promise of how a dealer bills.
Check whether the quoted total includes tax, delivery, installation, accessories, and removal. These examples exclude sales tax so that a buyer can apply the correct local rate.
How to lower the Speed Queen set price without losing useful features
Start by deciding which features and installation services are essential. If a standard top-load pair meets the household’s needs, a premium control package or front-load configuration may not justify a higher purchase price. Compare the exact model numbers and warranty terms so a cheaper quote is not actually for a different series or a single appliance.
- Ask two or three local dealers for a matched-pair quote, specifying washer, dryer fuel type, delivery, hookup, and haul-away.
- Check whether a bundled set costs less than buying the machines separately, but confirm that the bundle includes the intended dryer.
- Use existing compatible hoses, venting, and cords only when they are in good condition and accepted by the installer; avoid replacing safe parts solely to add a package fee.
- Schedule delivery during ordinary business hours and avoid rush service where possible. Flexible dates can help when local crews are busy.
- Measure the laundry area and route before purchase to reduce failed-delivery, exchange, and return charges.
- Keep electrical, gas, and vent modifications to the work required for safe, code-compliant installation. Obtain separate estimates before authorizing upgrades.
Do not cut costs by using an incompatible dryer cord, an unsafe vent, or unlicensed utility work. If an existing washer or dryer still works, replacing only the failed appliance may be less expensive, but check dimensions and compatibility before mixing brands or models. A mismatched pair can differ in appearance and operating features without affecting basic function.
The most reliable savings usually come from comparing like-for-like dealer quotes and avoiding unnecessary installation upgrades. A written quote that separates appliance prices from services makes it easier to identify real discounts and keep the final budget under control.