A standard bedroom door costs about $50-$400 for the door alone, while a replacement with professional installation typically totals $250-$800. The final price depends on whether the project uses a door slab or a prehung unit, the material, hardware, labor, and any frame repairs.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door slab | $50 | $150 | $350 | Door only; common hollow-core to solid wood |
| Prehung door unit | $120 | $250 | $500 | Door attached to a frame |
| Installed replacement | $250 | $450 | $800 | Standard opening and basic hardware |
| Installation labor | $100 | $200 | $400 | More for frame changes or difficult fitting |
Assumptions: U.S. pricing for a standard 30- to 36-inch-wide, 80-inch-high interior door, ordinary access, and basic installation.
What a standard bedroom door costs installed
For a typical 32-by-80-inch bedroom opening, a basic hollow-core slab costs about $50-$150, while a midrange solid-core slab commonly costs $150-$350. A prehung unit, which includes a frame and hinges, generally runs $120-$500 before installation. Most homeowners pay roughly $350-$550 for a straightforward installed replacement.
At the low end, the existing jamb is sound, the new slab matches the old dimensions, and the job needs little more than hinge and latch alignment. Higher totals are more likely when the door is solid wood, the frame must be replaced, or trimming, painting, and upgraded hardware are included. Custom sizes and specialty finishes can exceed these ranges.
How door, labor, and hardware appear on a quote
Contractors may quote a single installed price or separate materials and labor. The table below shows typical charges for one standard bedroom door; exact line items vary with local rates and whether painting is included.
| Quote item | Low | Typical | High | What changes the price |
|---|---|---|---|---|
| Door and frame | $50 | $180 | $500 | Core, wood species, prehung unit |
| Labor | $100 | $200 | $400 | Fit, frame condition, finish work |
| Knob and hinges | $15 | $45 | $120 | Basic passage set versus premium hardware |
| Removal and disposal | $20 | $50 | $100 | Old frame removal and haul-away |
| Paint or touch-up | $30 | $80 | $180 | One or both sides; prep and coats |
Ask whether the estimate includes disposal, hardware, and painting before comparing totals. A quote that excludes those items can look cheaper but cost more when the work is complete.
Which size, core, and frame changes the estimate
Width is a key cost and fit issue. Common bedroom door widths are 30, 32, and 36 inches, with 80 inches the usual height. A nonstandard opening may require a custom order, trimming, or reframing; custom doors often add $100-$400 or more compared with a standard stocked model. Measure the door slab and the rough opening separately before ordering.
Hollow-core doors are light and economical, often $50-$150 for a slab, but provide less sound reduction. Solid-core models commonly cost $150-$350 and weigh more, which can raise handling or installation charges. Solid wood and decorative designs may reach $300-$800 or higher. If the existing jamb is damaged, replacing or correcting it can add $100-$300, depending on trim and wall repairs.
When replacing the slab costs less than a prehung door
A slab replacement can save money when the existing frame is square, secure, and close to the new door’s dimensions. The slab itself may cost $50-$350, with labor often around $100-$250 for fitting, hinge mortises, and latch preparation. This is not always a simple swap: hinge positions, door swing, thickness, and knob placement must align with the existing jamb.
A prehung door is often the better quote when the frame is cracked, warped, or out of square. The unit typically costs $120-$500, and installation may bring the total to $300-$800. Compare the complete installed price, not just the listed door price. Reusing a sound frame favors a slab; replacing a poor frame favors a prehung unit and can reduce later adjustment work.
How long bedroom door installation takes
A straightforward slab swap usually takes about 1-3 labor hours. Installing a prehung unit in an existing opening often takes 3-6 hours, including leveling, fastening, trim adjustments, and testing the latch. Typical handyman or carpenter rates are about $50-$100 per hour, though some contractors use a minimum job charge of $100-$200.
Painting, moving furniture, repairing drywall, or correcting an uneven opening extends the visit. A larger project involving several doors may reduce the labor cost per door if the contractor can complete the work in one trip. Confirm the expected hours and minimum charge in writing. The labor formula is hours multiplied by the hourly rate, plus any stated trip or disposal fees.
Three bedroom door quotes for common project scopes
These examples show how scope affects totals. They assume ordinary access and standard openings; regional labor and finish requirements can shift the final quote.
| Project | Materials | Labor and time | Estimated total |
|---|---|---|---|
| Hollow-core slab swap | $75-$140 | $125-$225; 2-3 hours | $220-$400 |
| Solid-core slab with new knob | $190-$390 | $150-$275; 2-4 hours | $370-$700 |
| Prehung replacement with frame | $180-$450 | $225-$400; 4-6 hours | $450-$850 |
Check what each quote includes before treating these totals as directly comparable. One installer may include basic knob hardware and disposal, while another may price them separately. Painting, upgraded trim, and wall repair are generally additional unless listed.
Why bedroom door prices differ by region
Labor tends to cost more in major metropolitan areas and regions with high contractor demand. A practical planning adjustment is about 10%-25% above the ranges shown in expensive urban markets; rural areas may come in 5%-15% below them when travel charges are limited. These are budgeting allowances, not fixed regional rates.
Material availability, local sales tax, and the number of nearby installers also affect quotes. A remote location can have a higher minimum charge even when hourly wages are lower. Request at least two itemized estimates from contractors who serve the same area. Compare the door specification, labor scope, and warranty along with the bottom-line price.
Where to trim a bedroom door budget safely
Keeping a sound frame and choosing a stock-size slab can avoid custom ordering and extra carpentry. A hollow-core model is usually the lowest-cost option for a closet or low-traffic room; a solid-core door may justify its added price where privacy and sound control matter. Reusing working hinges and buying a basic passage knob can also reduce materials spending.
Clear the work area and confirm door swing, width, height, and thickness before ordering to limit return or adjustment charges. Ask whether painting can be handled separately, and request separate prices for frame replacement, disposal, and upgraded trim. Do not choose a cheaper slab until the installer confirms it fits the existing jamb. A poor fit can erase the initial savings through added labor.