The price for a 50 gallon State Select water heater varies by model, fuel type, and installation complexity. Typical cost ranges consider unit price, delivery, and common labor. This article covers the cost drivers, per-unit pricing, and practical estimates for U.S. buyers evaluating a 50 gallon State Select unit.
Introduction note: Consumers usually pay a total for a new 50 gal State Select water heater that includes the unit cost, installation labor, and basic hookups.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| State Select 50 gal electric water heater | $600 | $1,100 | $1,600 | Typical unit price before installation |
| State Select 50 gal gas water heater | $750 | $1,250 | $2,000 | Includes standard venting or ventless option |
| Installation labor (electric) | $300 | $600 | $1,000 | Plumbing and electrical work included |
| Installation labor (gas) | $400 | $800 | $1,200 | Vent, gas line, and clearance factors |
| Delivery/haul-away | $50 | $150 | $300 | Optional in some markets |
State Select 50-Gallon Price Range by Type and Configuration
Electric models typically carry lower installation complexity, resulting in lower up-front costs than gas models. For a standard 50 gallon electric State Select unit, buyers commonly see $600-$1,600 for the unit alone, while the total installed price generally runs $1,000-$2,000 depending on local labor rates and wiring needs. For gas-fired units, the price range broadens to roughly $750-$2,000 for the unit, with installed totals often $1,500-$3,000 when venting and gas-line work are required.
Assumptions: Midwest or South regions, standard 3/4″ gas line, typical electrical supply, normal access, and a standard 50 gal capacity with 40-60 gallons first-hour rating.
Major Cost Components in a State Select 50 Gallon Quote
The quote splits into four to five primary parts: equipment, labor, permits, delivery, and disposal; these drive the overall price.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (unit) | $600 | $1,150 | $1,900 | Includes tank, anode rod, fittings |
| Labor | $300 | $700 | $1,200 | Plumbing, electrical, and venting work |
| Permits/inspections | $20 | $120 | $400 | Depends on city or county |
| Delivery/haul-away | $50 | $150 | $300 | Optional |
| Delivery/installation supplies | $40 | $100 | $200 | Fittings, sealants, thread seal |
Formula example: Total ≈ Unit Price + Labor + Permits + Delivery. Labor hours typically 3-6 hours for electric, 4-8 hours for gas depending on existing connections.
Variables That Most Affect the Final 50 Gallon Price
Two numeric thresholds commonly shift the quote: installation difficulty and fuel type. If existing venting is incompatible with the new unit, or if the space requires relocation of a gas line or electrical panel, costs rise by hundreds to thousands of dollars. A 50 gallon electric unit with standard hookup may stay under $1,000 in simple garages, while a gas installation with new venting in a tight crawlspace often pushes totals above $2,000.
Assumptions: standard ceiling height, reachable utility connections, and typical 10-12 ft ceiling space for vent routing.
Ways to Reduce the Price on a State Select 50 Gallon System
Control scope and timing to trim costs without sacrificing reliability. Compare install dates to avoid peak-season surcharges, select standard materials over premium options, prewire or pre-plumb during prep, and request combined quotes for replacement and related plumbing work.
- Keep the same fuel type if possible to avoid new venting or gas-line runs.
- Choose a standard installation kit and avoid add-ons like high-efficiency vent systems unless required.
- Request a single quote for removal, disposal, and installation to secure bundled pricing.
Regional Price Differences for a 50 Gallon State Select
Regional variation matters: urban markets tend to be higher, rural markets may be lower, and climate can influence venting requirements. In the Northeast, total installed costs may trend higher due to permitting and labor; Southern states often show lower overall labor, while the Pacific region may see higher shipping and stock availability impacts.
Assumptions: typical metropolitan area pricing with standard permitting rules; not including rebates or tax credits.
Efficiency, Warranty, and Long-Term Value for State Select 50 Gallon Units
Long-term cost includes energy use and warranty coverage. An Energy Star rated 50 gal electric State Select may save $50-$150 annually in energy costs compared to older models, while a gas model with high-efficiency features can reduce standby losses and mid-range annual energy use. Warranty coverage often ranges 6-12 years on tank and controls, affecting replacement risk and total ownership cost.
Assumptions: standard efficiency levels, no extreme climate exposures, and baseline maintenance.
Quote Comparison: Real-World 50 Gallon State Select Scenarios
Compare three example quotes to understand how scope changes price. A basic electric setup in a single-family home might show $1,000-$1,400 installed, while a gas setup with venting and gas-line upgrades could reach $2,000-$3,000 total.
| Scenario | Unit Price | Labor | Permits | Total Installed |
|---|---|---|---|---|
| Electric, simple install | $600-$900 | $300-$600 | $20-$100 | $1,000-$1,600 |
| Gas, venting added | $900-$1,500 | $500-$1,000 | $60-$200 | $1,500-$2,700 |
| Gas, high-efficiency vent system | $1,100-$2,000 | $700-$1,200 | $120-$400 | $2,000-$3,600 |
Delivery, Scheduling, and Aftercare Impacts on Price
Delivery windows and scheduling can add costs if special access or weekend work is required. Some contractors charge a small delivery fee or remote-location surcharge, and post-install maintenance plans may add $50-$150 annually for optional coverage.
Assumptions: standard service area within 20 miles of the installer; no emergency service.