Statuary Classique quartz typically costs about $75-$145 per square foot installed, with a common 30-square-foot kitchen project landing near $3,300. The final price depends on the slab supplier, local fabrication labor, edge profile, cutouts, removal, and how much material the layout requires.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed countertop | $75/sq ft | $110/sq ft | $145/sq ft | Material, fabrication, and standard installation |
| 30-sq-ft kitchen | $2,250 | $3,300 | $4,350 | Before unusual removal or structural work |
| Material only | $50/sq ft | $70/sq ft | $95/sq ft | Supplier and slab availability affect price |
Assumptions: U.S. pricing for standard 3-cm quartz, ordinary access, and a straightforward kitchen layout; local quotes can differ.
Statuary Classique quartz price for a 30-square-foot kitchen
For a typical kitchen with about 30 square feet of countertop, budget roughly $2,250-$4,350 installed, with about $3,300 as a planning midpoint. A smaller vanity or kitchenette may use less material, but shops often have minimum fabrication or installation charges that limit savings on small jobs.
Most standard projects fall near $75-$145 per square foot installed. The estimate generally assumes measurement, templating, fabrication, delivery, and installation, but not necessarily old-countertop removal, plumbing reconnection, or premium edge work. Statuary Classique availability and its exact slab price should be confirmed with the local dealer.
Fabrication, cutouts, and delivery in the countertop quote
Quartz quotes combine the slab with shop work and installation. Ask whether the price is based on usable square footage, full slabs, or a bundled project rate; the distinction matters when the kitchen layout leaves substantial offcuts.
| Quote component | Typical price | What it covers | Common change |
|---|---|---|---|
| Quartz material | $50-$95/sq ft | Slab allocation or material allowance | Color stock and slab yield |
| Fabrication and labor | $20-$40/sq ft | Templates, cutting, polishing, and fitting | Complex seams or edge shape |
| Sink or cooktop cutout | $150-$350 each | Standard opening and finished edges | Undermount sink or special profile |
| Delivery and installation | $250-$700 total | Transport and placement | Stairs, distance, or difficult access |
| Removal and disposal | $5-$15/sq ft | Taking out and hauling away old tops | Heavy stone or complicated removal |
Cutouts, removal, and access charges can add hundreds of dollars beyond the square-foot rate. Fabrication and installation labor commonly works out to about $50-$100 per crew-hour, though many shops quote by project rather than by the hour.
How slab size, seams, and edge profiles change the estimate
Layout and slab yield are major cost drivers. A 20-square-foot vanity may fit efficiently from a remnant, while a 45-square-foot kitchen with an island may require more slab material, particularly if the veining must align across seams. Ask the fabricator to show the proposed layout and explain any full-slab charge.
Standard eased edges are usually included or inexpensive. A 2-inch mitered edge, waterfall panel, or elaborate profile can add about $20-$60 per linear foot, depending on fabrication. A seam in a prominent area may require additional layout work. Island size and vein placement can raise the bill even when total countertop area changes only slightly.
Regional labor rates and quartz delivery can shift local prices
Metropolitan markets with higher shop wages and delivery costs may quote 10%-25% above the national planning range. Smaller markets can come in 5%-15% below it, although limited access to this specific color may erase the difference through freight or special ordering.
Regional comparisons are not guarantees: competition, slab inventory, fuel costs, and the installer’s schedule also matter. Request a local quote that identifies the material brand or product name, thickness, edge, cutouts, and delivery rather than comparing only a headline rate per square foot.
Three Statuary Classique kitchen quotes by project scope
These examples show how scope affects a quote; they are planning estimates, not fixed dealer prices. All assume a standard installation and ordinary access.
| Project | Area and scope | Estimated total | Approximate installed rate |
|---|---|---|---|
| Small straight run | 18 sq ft, one sink cutout | $1,800-$2,700 | $100-$150/sq ft |
| Typical kitchen | 30 sq ft, sink and cooktop openings | $2,700-$4,200 | $90-$140/sq ft |
| Kitchen with island | 45 sq ft, two cutouts, upgraded edge | $4,500-$6,800 | $100-$151/sq ft |
Small jobs often have a higher per-square-foot price because fixed setup and delivery charges are spread over less material. Island layouts may also require additional slab allocation or more careful vein matching.
Installation timing and quote details worth confirming
After final measurements, a straightforward fabrication schedule often takes 1-3 weeks, depending on stock and shop workload. Installation itself commonly takes 3-6 hours for a standard kitchen; larger kitchens, multiple seams, or access problems may extend the visit.
Before paying a deposit, confirm whether the quote includes templating, sink and faucet holes, backsplash, seam placement, delivery, and removal. Ask whether the price can change after the slab is selected or the final measurements are taken. A written, itemized quote makes competing bids easier to compare.
Statuary Classique versus lower-cost quartz options
Other quartz colors with simpler or more readily stocked patterns may cost about $60-$110 per square foot installed. A distinctive marble-look design can sit higher, especially when the supplier has limited local inventory or a project needs careful vein placement. Natural marble may have a similar or higher installed price, but sealing and stain care differ.
Compare samples under the kitchen’s lighting and verify the exact product name, thickness, and finish. A dealer’s sample may not show the variation across a full slab. Choosing a stocked alternative can reduce freight or material expense without changing the countertop’s overall scope.
Lower the countertop bill by controlling the layout
Keep the design simple where possible: standard eased edges, fewer seams, and efficient cuts can reduce fabrication costs. Measure the project carefully, avoid unnecessary overhangs, and ask whether an available remnant suits a small vanity or short run. Bundling kitchen and bathroom tops may also reduce separate delivery or setup charges.
Get at least three itemized estimates using the same square footage, cutouts, edge, and removal requirements. Check whether existing cabinets are level before installation; correcting them later can mean added labor or delays. Compare the complete installed total, not just the advertised slab price.