Stay-Tuff fence prices depend on fence height, wire configuration, terrain, and whether the quote covers materials or installation. A 330-foot roll of woven wire may cost about $250-$650, while a professionally installed fence commonly runs $4-$9 per linear foot before difficult site work or gates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Woven wire materials | $250 per 330-ft roll | $425 per roll | $650 per roll | Height and wire pattern affect price |
| Materials per linear foot | $0.75 | $1.30 | $2.00 | Wire, posts, staples, and basic hardware |
| Installed fence | $4 per ft | $6.50 per ft | $9 per ft | Standard access and typical agricultural layout |
| 1,000-ft project | $4,000 | $6,500 | $9,000 | Excludes major gates and extensive clearing |
Assumptions: U.S. dealer pricing varies by product, freight, region, and installation scope; confirm the exact roll specification before comparing quotes.
What a 330-foot Stay-Tuff fence run usually costs
For a straightforward 330-foot run, materials alone often total $250-$650 for woven wire, plus roughly $150-$350 for posts, fasteners, and bracing. That places a basic materials budget around $400-$1,000. With professional labor and ordinary site conditions, the same run may total about $1,300-$3,000.
A practical planning figure is $6-$7 per linear foot installed for a standard agricultural fence. That assumes a conventional layout, suitable soil, no unusually steep slopes, and no large gate package. Longer projects can have a lower per-foot labor rate because setup and mobilization costs are spread across more fence.
How wire, posts, and labor appear in the quote
Ask whether the estimate includes corners, end braces, tensioning, and delivery. A low material quote may cover only the wire rolls, while the finished fence also needs posts and substantial bracing at direction changes and ends.
| Quote item | Typical price | Basis | What changes it |
|---|---|---|---|
| Stay-Tuff woven wire | $250-$650 | Per 330-ft roll | Height, mesh, gauge, coating |
| Line and brace posts | $0.75-$2.50 | Per linear ft allowance | Wood or steel, spacing, soil |
| Installation labor | $2-$5 | Per linear ft | Terrain, crew access, tensioning |
| Freight and delivery | $50-$400 | Per order or trip | Distance and order size |
| Gate and hardware | $150-$900 | Per opening | Width, frame, latch, installation |
Labor is usually the largest variable in a complete fence quote. A useful estimate check is ; fencing crews may charge the equivalent of $50-$100 per worker-hour, or bid by the foot.
Fence height, mesh, and terrain that shift the price
Height and wire configuration matter: a 39-inch livestock fence may cost less than a 48- or 60-inch option, and tighter mesh or heavier wire can raise roll prices by 15%-40%. Confirm the product label and roll length; two quotes described simply as “Stay-Tuff” may not specify the same fence.
Terrain can add another 10%-30% when crews must work around rock, heavy brush, wet ground, or frequent elevation changes. Straight runs with firm, accessible soil are faster to build. Long stretches between corners may also reduce the number of costly brace assemblies per foot.
Compare the same height, wire pattern, roll length, and post plan—not just the brand name.
Regional delivery and installed rates across the United States
Labor and freight can make an otherwise similar fence quote differ by location. Rural projects near a fencing supplier may fall near the low end, while remote deliveries and high-wage metro areas can be 10%-25% higher. In regions with rocky ground or steep pasture, site difficulty may matter more than the local cost of wire.
Request freight as a separate line item and ask whether the contractor collects materials locally. A delivery charge of $50-$400 can be significant on a short run, but may be modest when spread across several thousand feet. State and county sales tax treatment also varies.
How crew size and installation hours affect the bill
A small crew may install roughly 300-700 feet in a day under favorable conditions, but clearing, corner construction, and difficult soil can sharply reduce output. A 1,000-foot straight run might take two to four working days; a subdivided pasture with gates and uneven ground may take longer.
Contractors often price by linear foot rather than list hourly labor, so clarify what production assumptions are built into the bid. Ask whether the rate includes pulling old wire, setting posts, stretching and fastening the new fence, and cleanup. Separate hourly charges from fixed-price work before approving extra tasks.
Three sample quotes for different fence layouts
These examples illustrate how scope changes the total; local quotes may differ. The wire allowance uses a 330-foot roll where applicable, while post spacing and corner counts depend on the site plan.
| Project | Scope and labor | Estimated total |
|---|---|---|
| Short pasture run | 330 ft, standard wire, basic posts, 12-16 crew hours | $1,500-$2,600 |
| Long straight boundary | 1,000 ft, standard wire, 30-45 crew hours | $4,500-$7,000 |
| Uneven livestock enclosure | 1,000 ft, heavier specification, added bracing, 45-65 crew hours | $7,000-$10,500 |
Assumptions: Typical U.S. contractor labor, basic access, and no unusually expensive land clearing or extensive gate work.
Existing fence removal and gate charges to check
Removal is not always part of installation. Old-wire take-down and disposal may add $0.50-$2 per linear foot, with more for tangled, buried, or heavily overgrown fence. Brush clearing may be quoted hourly or by area, so request a defined limit before work begins.
A basic farm gate opening may add $150-$900 for the gate, posts, hardware, and fitting; wide or reinforced equipment access can cost more. Confirm whether the estimate includes delivery, disposal fees, corner braces, and tax. These exclusions can turn a low per-foot quote into a substantially higher invoice.
Ways to lower a Stay-Tuff fence estimate
Mark the route and identify gates, corners, and property-line constraints before requesting bids. A clear, straight layout reduces uncertainty and may limit extra labor. Compare at least three itemized quotes using the same fence specification, post spacing, brace count, and removal scope.
Buy only the height and mesh needed for the animals and intended use, while keeping adequate bracing and proper installation. Combining delivery with other farm materials can reduce freight, and scheduling outside peak contractor periods may improve availability. Do not cut costs by omitting essential corner braces or tensioning work, which can lead to repairs and premature failure.