A new Stihl BR 600 backpack blower typically costs about $600-$750 before tax, with dealer pricing, location, and included accessories affecting the total. Used units can cost considerably less, while fuel, hearing protection, and routine maintenance add to ownership expenses.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New BR 600 | $600 | $675 | $750 | Price varies by dealer and market |
| Used BR 600 | $250 | $400 | $550 | Condition and service history matter |
| Fuel and oil for initial use | $15 | $25 | $40 | Depends on fuel container and mix purchase |
| Basic hearing protection | $15 | $35 | $70 | Higher-rated or integrated protection costs more |
What a new BR 600 costs at a Stihl dealer
For a new Stihl BR 600, budget roughly $600-$750 before sales tax. A typical buyer may pay around $675 for the blower itself, assuming standard equipment, no delivery charge, and an ordinary U.S. retail market. Dealers set local prices, and a store may quote a different amount based on inventory or current promotions.
Plan on about $650-$825 out the door before optional gear, depending on local tax and dealer charges. Sales tax can add approximately $0-$75 on a $600-$750 purchase, depending on the state and locality. Assumptions: new standard model, typical dealer sale, no extended warranty or paid delivery.
How dealer setup and accessories shape the quote
The blower price is the largest part of the bill, but the final quote can include setup, fuel, protective equipment, and tax. Ask whether the quoted amount includes dealer preparation and any accessories shown in the display. A quote that includes useful protective gear may be better value than a lower blower-only price.
| Quote component | Typical price | What changes it | Buying note |
|---|---|---|---|
| BR 600 blower | $600-$750 | Dealer and regional pricing | Confirm new condition and included parts |
| Dealer setup | $0-$40 | Store policy and assembly | Often included, but verify |
| Fuel and 2-cycle oil | $15-$40 | Container size and fuel choice | Use the specified fuel mixture |
| Hearing and eye protection | $20-$90 | Style and protection rating | Price is per basic set |
| Sales tax | $0-$75 | Local tax rate | Calculated on taxable purchase |
Check the written quote for setup, fuel, and protective equipment rather than comparing sticker prices alone. If the dealer charges for assembly, the fee may be modest, but a bundled package could include gear at a better combined price.
Engine size, blower condition, and warranty change value
New BR 600 pricing is relatively consistent, but the value of an individual quote depends on what is being sold. Check whether it is a complete, new unit with the standard tube, harness, and operating parts, and ask what warranty applies to the buyer and intended use. Commercial use may have different warranty terms than occasional residential use.
For a used blower, condition creates a wider spread than location. A clean machine with documented maintenance may justify $400-$550; a unit with hard starting, worn straps, or unknown service history may be closer to $250-$350. Repair needs can quickly erase the savings: request a start-up demonstration and inspect the fan housing, controls, harness, and fuel lines.
On a used BR 600, a low asking price is not a bargain if repairs approach $150-$250. A dealer inspection or repair estimate can help quantify risk before purchase.
How Midwest and coastal dealer prices compare
Local pricing may differ by roughly 5%-15% between markets, though dealer-level variation can matter more than a simple regional average. Higher-cost metro areas and locations with limited inventory may sit toward the upper end; competitive suburban markets or seasonal promotions may land nearer the lower end. Freight or delivery can add another $0-$50 when the buyer cannot collect the blower.
Compare at least two nearby authorized dealers using the same model and included items. Ask for the pre-tax price, setup fee, delivery charge, and warranty details in writing. The lowest advertised amount may not represent the lowest total if it excludes delivery or required add-ons.
What fuel, maintenance, and protection add each season
The BR 600 uses a two-stroke engine, so operating costs include the correct fuel mixture and periodic maintenance. A homeowner using the blower occasionally might spend about $30-$100 a year on fuel and oil, while frequent property or commercial use can exceed $150. Usage, fuel prices, and run time explain most of the difference.
Routine service can include air-filter cleaning or replacement, spark-plug attention, and inspection of the fuel system. Allow about $20-$60 for basic service items if maintained independently, or roughly $75-$175 for a dealer service visit, depending on the work and local labor rate.
Budget for recurring upkeep separately from the purchase price, especially if the blower will run several hours each week. Proper storage and fresh, correctly mixed fuel can reduce avoidable starting and fuel-system problems.
Is a used BR 600 cheaper than buying new?
A used unit can save $150-$400 compared with a typical new purchase, but that discount should be weighed against wear, service records, and remaining warranty. A used price around $350-$450 may make sense for a well-maintained blower that starts easily and has no obvious damage. Units below $300 deserve a careful inspection and a repair allowance.
For an occasional user, a lighter or lower-priced backpack blower may be less expensive if the BR 600’s performance is unnecessary. For heavy leaf cleanup, compare the total price and operating condition of alternatives with similar airflow and handling rather than choosing only by brand or engine size.
Which quote details can bring the BR 600 total down?
Price comparison is most useful before peak fall cleanup, when demand can narrow dealer choices. Ask whether a store offers a seasonal discount, includes setup, or can match a competing local quote. Bundling protective equipment may help, but only if the items are needed and their standalone prices are clear.
For used purchases, prioritize documented maintenance and a cold-start test over the lowest asking price. For new purchases, avoid paying extra for accessories that do not fit the work, and confirm the warranty terms before deciding between dealer packages.
Controlling add-ons and comparing the same out-the-door package are the clearest ways to reduce the bill without compromising the blower’s condition. Keep the receipt and maintenance records, since they can help with warranty questions and future resale.
When do dealer fees or repairs justify a different offer?
A setup or delivery charge is not automatically unreasonable, but it should be itemized. A $20-$40 preparation fee may be acceptable if it covers assembly and inspection; a higher charge warrants asking what work is included. For a used blower, obtain a repair estimate before agreeing to a price when it needs carburetor, fuel-line, or starting-system work.
For example, a new unit at $650 plus $30 setup and $45 tax totals $725 before gear. A used unit at $400 plus $125 in service and $25 in fuel totals $550, but comes with more condition risk. Compare complete costs and warranty coverage, not just the number on the tag.