A new Stihl cut-off saw typically costs about $1,300-$2,400 before tax, depending on model, blade, and dealer pricing. Buyers also need to budget for fuel, protective equipment, delivery, and any optional water-supply kit; used saws can cost substantially less, but condition and maintenance history matter.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New gas saw | $1,300 | $1,750 | $2,400 | Model and dealer determine price |
| Used gas saw | $450 | $950 | $1,600 | Condition, age, and model vary |
| 14-inch diamond blade | $80 | $150 | $300 | Blade type and material rating matter |
| Starter equipment and supplies | $100 | $250 | $500 | May include PPE and water accessories |
| Tax and delivery | $0 | $100 | $250 | Depends on location and dealer |
What a new Stihl cut-off saw costs by model
Stihl’s gas-powered cut-off saws are professional tools, and their prices generally fall between roughly $1,300 and $2,400 before sales tax. The lower end is usually associated with a compact model such as the TS 410; larger-displacement or higher-output models such as the TS 700 and TS 800 tend to cost more. A dealer quote may differ from suggested retail pricing, and equipment bundles can change the out-the-door amount.
For a typical 14-inch gas model, allow about $1,400-$1,800 for the powerhead before accessories. A larger 16-inch saw may land around $1,800-$2,400. These ranges are planning estimates, not guaranteed national prices: model availability, dealer promotions, region, and included accessories affect the quote. Most gas models are sold through authorized dealers, so local inventory and setup charges may matter.
Stihl’s battery-powered TSA 230 is a different kind of tool, intended for smaller cutting jobs and a shorter blade diameter than the larger gas saws. The saw alone may cost approximately $450-$700, while a compatible battery and charger can add roughly $200-$600 or more if they are not already owned. Buyers should confirm the exact configuration and current dealer quote because battery bundles vary.
Assumptions: New saw, U.S. dealer pricing, standard configuration, no tax, and no premium blade or extended warranty.
How region and dealer inventory shift saw quotes
Regional differences are usually less dramatic than the gap between saw models, but a local quote can still vary by about 5%-15%. Urban and high-cost coastal markets may have higher labor and operating costs than rural areas, while a smaller dealer may charge for delivery or setup. Local sales tax is added separately and can move the final total by several percentage points.
Compare the same model and included items before treating two dealer quotes as different prices. A quote that includes a blade, water kit, or initial setup may be higher than a bare-tool quote but less expensive overall. Availability also matters: when a specific model is back-ordered, a buyer may face delivery charges or have to compare a different model rather than wait for a discount.
Ask each dealer to identify the model number, whether a blade is included, and any fees for assembly, setup, or delivery. A stated price may exclude tax and protective equipment. For online listings, check whether the seller is authorized, whether the unit is new, and whether the warranty applies in the United States. Shipping a heavy power tool can add around $25-$100, but some dealers include local delivery.
Seasonal changes are not predictable enough to assume a fixed discount. Construction demand, local stock, and dealer promotions can affect price, while urgent replacement purchases may leave little time to compare. Calling two or three nearby dealers for written, itemized quotes is often a more useful comparison than relying on a broad regional average.
What the saw quote includes for blades and labor
A cut-off saw quote may cover only the powerhead. The blade, water attachment, fuel, and personal protective equipment can all be separate purchases. The table gives typical planning ranges; exact prices vary with blade diameter, material rating, and equipment compatibility.
| Quote item | Typical price | What changes the charge | Common unit |
|---|---|---|---|
| Gas saw powerhead | $1,300-$2,400 | Model, engine size, features | Per saw |
| Diamond blade | $80-$300 | Concrete, asphalt, masonry, blade grade | Per blade |
| Abrasive blade | $8-$25 | Diameter and cutting material | Per blade |
| Water attachment or hose kit | $30-$120 | Kit type and saw compatibility | Per kit |
| Dealer setup or delivery | $0-$150 | Dealer policy and distance | Per transaction |
| Fuel, oil, and basic PPE | $60-$250 | Existing supplies and safety gear | Initial allowance |
Blade selection can change the first-day budget by more than $200. A general-purpose diamond blade is often more costly upfront than an abrasive blade, but blade life and cutting speed depend on the material and operating conditions. A blade selected for concrete may not be the right choice for asphalt or metal. Confirm the blade diameter and arbor fit for the specific saw before purchase.
Dealer labor is generally limited to preparation or setup, rather than installation in the construction sense. If a dealer charges for setup, ask what it includes, such as inspection, controls check, or demonstration. The powerhead price should not be assumed to cover a blade or job-site accessories unless they appear on the quote.
How engine size, blade diameter, and condition change price
Model capability is the main price driver. A compact 12-inch-class saw generally costs less than a 14-inch or 16-inch model, but the appropriate size depends on required cutting depth and the job. A larger blade and more powerful engine usually mean a higher purchase price, greater fuel use, and heavier handling. Buyers should check the saw’s specifications rather than choosing by blade diameter alone.
Moving from a 14-inch to a 16-inch model can add several hundred dollars to the initial budget. Model-to-model differences may also reflect features such as electronic fuel injection, starting systems, or engine output. For example, a TS 500i typically falls above many standard 14-inch models in price, while TS 700 and TS 800 models occupy the higher-output end of the lineup. Dealer stock can shift these comparisons.
Blade type and cutting depth matter as well. A 12-inch blade is suited to a different range of cuts than a 14-inch blade; a 16-inch saw can reach deeper but may not be needed for routine shallow cuts. For work requiring repeated cuts through thick concrete, compare the maximum cutting depth and the model’s intended application. Renting a larger saw for an occasional deep cut may cost less than buying one.
On used equipment, age alone does not establish value. Engine starting behavior, compression, filter condition, clutch operation, guards, and maintenance records can affect likely repair expense. A used saw priced at $700-$1,200 may appear economical, but a needed engine or clutch repair can add several hundred dollars. Inspect the unit or arrange a qualified evaluation before treating a low asking price as a bargain.
Assumptions: Price ranges compare complete saws in working condition; repair estimates are not included in used-saw prices.
How much cutting time and operator labor to budget
Buying a saw is only part of the project budget if an operator must be hired. U.S. labor rates for a qualified concrete or masonry worker often range from about $50-$100 per hour, with higher rates possible in expensive metro areas or for specialized work. A small, accessible cutting task may take 1-3 hours; multiple cuts, setup, dust control, and cleanup can extend the visit.
Estimate operator expense by multiplying paid hours by the quoted hourly rate, then add any minimum callout charge.
For example, 3 hours at $75 per hour equals $225 in labor before travel, minimum charges, or disposal. Some contractors quote by the cut or project rather than by the hour. Ask whether the rate includes the saw, blade wear, water management, and cleanup, because those items may otherwise appear as separate line items.
For a purchase intended for frequent use, the relevant comparison is the saw’s total ownership cost, not simply the initial price. Fuel, blades, routine service, and downtime all add expense. For a one-time job, hiring a contractor or renting equipment may be less costly than buying a $1,500-plus saw and the accessories required to operate it safely.
Three realistic budgets for common Stihl saw purchases
These examples show how the powerhead price and extras combine. They use approximate U.S. retail ranges and assume ordinary local availability. Sales tax is shown as an allowance because state and local rates differ; actual tax is based on the buyer’s location.
| Purchase scenario | Saw and setup | Accessories | Estimated total |
|---|---|---|---|
| Compact 12-inch gas saw, basic use | $1,300-$1,550 | $100-$250 | $1,400-$1,800 |
| 14-inch gas saw, diamond blade and water kit | $1,400-$1,850 | $150-$420 | $1,650-$2,450 |
| 16-inch higher-output gas saw, premium blade | $1,850-$2,400 | $200-$500 | $2,100-$3,050 |
The middle example represents a common complete setup rather than the cheapest bare-tool purchase. Its added cost reflects a diamond blade, water accessories, and an allowance for initial supplies. A buyer who already owns compatible equipment may spend less; a buyer who needs protective equipment, delivery, and tax may spend more.
A battery TSA 230 setup is not directly comparable with those gas examples. If the buyer already has a compatible battery and charger, the additional purchase could be around $450-$700 for the saw. If both battery and charger are needed, the total can reach roughly $650-$1,300 depending on capacity and package. Confirm that the battery configuration meets the expected runtime and cutting application.
Which purchase choices lower the Stihl saw bill
Start by matching the model to actual cutting depth and frequency. Paying more for a 16-inch saw does not provide savings if most work needs a 12- or 14-inch blade. Conversely, choosing a smaller saw for repeated deep cuts can slow the job or require another tool. Compare the specifications for the planned material, cut depth, and expected duty cycle before settling on a model.
The most reliable savings come from avoiding capacity and accessories the job does not require. Request separate prices for the powerhead, blade, water kit, and delivery so optional items are visible. If a dealer bundle includes equipment that is already owned, ask whether the items can be removed. Check blade compatibility before buying a lower-priced alternative.
For infrequent work, compare purchase with rental or contractor pricing. A rental may cost about $75-$150 per day for a cut-off saw, with a deposit, blade charge, or delivery added in some markets. A short job may therefore cost far less than ownership, although availability and pickup time matter. For repeated work, a purchased saw may make more sense once rental charges accumulate.
Used equipment can reduce the upfront cost, but price it alongside likely maintenance. Request a cold start, inspect the guard and controls, and ask about service history. Avoid assuming that a low-price unit includes a usable blade or that a remaining warranty transfers. If the seller cannot demonstrate operation, reserve money for inspection and repairs rather than comparing the asking price directly with a dealer’s new-saw quote.
New, used, and rental prices for occasional concrete cutting
New equipment offers known condition and a dealer purchase record, but the initial cost is highest. A used Stihl saw commonly lists around $450-$1,600, depending on model, age, and working condition. Older or heavily used units may cost less, while a well-maintained, late-model saw can approach the price of a discounted new entry model. Ask about warranty coverage and confirm whether it applies to the buyer.
For a short, one-off job, rental or contracted cutting may beat the full cost of ownership. Daily rental rates of about $75-$150 can exclude the blade, fuel, delivery, damage waiver, or late-return fee. A contractor may quote a minimum service charge or a per-cut price instead. Compare the complete amount, including setup and cleanup, with the purchase price plus blade, PPE, maintenance, and storage.
Repairing a saw already owned can be economical when the problem is routine maintenance, such as filters or a starter component. A repair estimate of $100-$300 may be reasonable for some service work, while major engine or clutch repairs can climb to $400-$900 or more. These are broad allowances, not fixed rates; parts availability and labor differ. Request a written diagnosis before approving extensive work.
When comparing choices, use the number of expected workdays as a practical test. A $1,700 purchase is difficult to justify for a single afternoon if a rental and blade together cost a few hundred dollars. For frequent construction use, the value of immediate access, consistent setup, and reduced rental logistics may outweigh the higher purchase price.