A new Stihl MS 362 chainsaw typically costs about $1,000-$1,150 before sales tax, while used saws often sell for $450-$800 depending on condition. The 362 Stihl chainsaw price varies with model configuration, dealer pricing, included accessories, location, and whether the saw is new or pre-owned.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New MS 362 C-M | $1,000 | $1,075 | $1,150 | Typical dealer price before tax |
| Used MS 362 | $450 | $625 | $800 | Running saw in serviceable condition |
| Bar and chain upgrade | $45 | $100 | $180 | Depends on bar length and chain type |
| Sales tax | $0 | $60 | $120 | Varies by state and purchase price |
What a new MS 362 C-M costs at a dealer
For the current-generation MS 362 C-M, buyers can generally budget $1,000-$1,150 for the powerhead and standard retail configuration. A typical midpoint is about $1,075 before tax. Dealer inventory, local pricing, and whether the saw comes with a particular bar length can move the quote outside that range.
The MS 362 is a professional-grade, 59 cc gas saw. Prices assume a new saw sold through an authorized U.S. dealer, standard bar and chain, ordinary access to the store, and no unusual delivery or service charge. Assumptions: U.S. retail pricing, standard equipment, and no sales tax included.
Some listings show a lower figure for a bare powerhead, an older model year, or a promotion. Buyers should confirm that the price is for an MS 362 rather than a different 362 variant, and ask whether the quoted amount includes the bar, chain, and initial setup.
How the bar, chain, and dealer charges shape the quote
The total at checkout can include more than the saw itself. Bar length and chain choice affect accessory pricing, while the dealer may include setup in the sale price or list it separately. The table gives typical add-on ranges; charges vary by store and package.
| Quote item | Typical price | What changes it | Buying note |
|---|---|---|---|
| MS 362 C-M saw | $1,000-$1,150 | Dealer and configuration | Confirm exact model |
| Replacement bar | $45-$110 | Length and bar type | Longer bars can cost more |
| Chain | $20-$45 | Pitch, gauge, and cutter style | Check compatibility |
| Setup or delivery | $0-$75 | Dealer policy and distance | May be included in the sale |
| Sales tax | $0-$120 | Local tax rate | Calculated at checkout |
Labor is usually not billed as an hourly installation job for a new saw, but service work may be charged separately. A dealer tune-up or repair commonly runs about $75-$150 per hour, plus parts, depending on the shop.
Why bar length and saw condition change prices
Configuration matters: the MS 362 is commonly paired with a 20-inch bar, while a 25-inch setup can add roughly $25-$70 for the bar and compatible chain. A longer bar also changes cutting performance and should match the work and operator’s experience; it is not automatically a better-value purchase.
Condition drives used prices even more sharply. A clean, well-maintained saw with good compression and a service history may command $650-$800. A saw with worn chain, a damaged bar, hard starting, or uncertain maintenance may fall to $450-$600, but repairs can erase the savings. Before paying a used-saw premium, test a cold start and inspect the chain brake, sprocket, bar rails, and service history.
Regional retail differences also matter. Dealer prices in high-cost urban markets can run about 5%-10% above typical pricing, while rural dealers or seasonal promotions may be 3%-8% lower. These are planning ranges rather than guaranteed discounts, and tax or delivery can narrow the difference.
Ways to lower the MS 362 purchase price
Compare written quotes from two or three authorized dealers, asking each to price the same model, bar length, and included items. A quote that appears lower may exclude setup, a chain, or delivery. Comparing the complete out-the-door package is more useful than comparing the saw’s advertised price alone.
Buy only the bar length needed for the job and avoid paying for premium accessories that are not required. If a used saw is under consideration, have a qualified shop inspect it before purchase; a modest inspection fee can reveal problems that cost more than the initial discount. For a worn saw already owned, price the repair against replacement before buying another machine.
Used MS 362 listings need a repair budget
Private-party listings commonly fall around $450-$800, with unusually clean examples sometimes priced higher. A saw sold as nonrunning may be listed for less, but the final expense is uncertain until diagnosis. Carburetor work, ignition parts, fuel-system repairs, or a damaged cylinder can add $100-$500 or more, depending on parts and labor.
Ask for a cold-start demonstration, verify that the serial number and model match the listing, and inspect for fuel leaks, cracks, missing parts, and excessive cylinder scoring. A compression test and shop estimate are useful when the seller cannot demonstrate reliable operation. Avoid treating a low asking price as a bargain until likely repairs are included in the budget.
MS 362 versus a smaller or larger Stihl saw
The MS 362 is intended for substantial cutting work, so a smaller homeowner saw may cost less but can be slower or unsuitable for repeated large-diameter cuts. A larger professional model can cost several hundred dollars more, depending on model and configuration, while adding weight and power that occasional users may not need.
Compare the total cost of the actual job, not just engine size. If the saw will be used only a few times a year, renting a suitable professional saw may be cheaper than buying and maintaining one. For frequent firewood or land-management work, the MS 362’s purchase price may be more reasonable when spread across regular use.
What a complete 362 buying budget looks like
A new saw priced at $1,075 with a $70 bar upgrade and $80 of applicable tax would total about $1,225 before any optional equipment. A used saw at $600 plus a $120 inspection and $60 in basic replacement items would reach about $780, before repairs or tax. A damaged used saw priced at $450 could exceed $900 if a major repair is needed.
For a dependable new MS 362 C-M, a practical checkout budget is about $1,100-$1,300 after common accessories and tax. A used purchase can be substantially cheaper, but its value depends on verified condition, compatible equipment, and the cost of repairs.