The price of the Stihl MS 391 chainsaw in the U.S. typically falls within a few hundred dollars, depending on condition, included accessories, and retailer. This article breaks down actual cost ranges, common price drivers, and practical ways to budget for a new or used MS 391. Understanding these figures helps buyers compare quotes and avoid surprises when shopping.
Introduction notes: Assumptions include standard 16″ bar, mid-range chain, and typical warranty options; regional taxes may affect final costs.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New Stihl MS 391 (MS 391 Farm Boss style) | $399 | $449 | $499 | MS 391 with 16″ bar common retail price |
| Used/Refurbished MS 391 | $250 | $350 | $420 | Depends on bar length and condition |
| Extended warranty (optional) | $40 | $70 | $120 | Dealer or manufacturer options |
| Accessories package | $25 | $60 | $100 | Bar cover, file set, multi-tool |
| Tax and handling | $0 | $20 | $40 | Region dependent |
What a Typical MS 391 Quote Looks Like
Prices for a new MS 391 in the U.S. usually range from $399 to $499, with most buyers landing around $449. The quote may show a per-unit price for the chainsaw itself plus optional add-ons such as an extended warranty or an accessories bundle. Assumptions: standard 16″ bar, gas-oil mix, and basic safety gear included in some bundles.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Chainsaw unit price | $399 | $449 | $499 | Excludes tax |
| Extended warranty | $40 | $70 | $120 | Optional |
| Accessories bundle | $25 | $60 | $100 | Includes bar cover, file, etc. |
| Tax | $0 | $20 | $40 | Based on state |
Key Price Drivers for the MS 391 in the U.S.
The MS 391 price is influenced most by condition (new vs used), bar length (14″, 16″, 18″), and warranty options. Regional promotions can add or subtract a few tens of dollars. Expect higher prices in peak seasons or at big-box retailers with limited stock.
Labor and Service Costs When Upgrading or Servicing
If purchasing maintenance or service plans alongside the MS 391, consider labor charges for dealer servicing or in-shop tuning. Typical pricing for diagnostic or minor service ranges from $25-$75 per hour, while complete tune-ups may run $60-$120 depending on location and parts used.
Region-Specific Variations in Price
Prices in urban markets or high-demand regions can be 5-12% higher on average than rural markets, driven by tax rates, dealer margins, and stock levels. In the Midwest, a new unit may trend toward the lower end of the range, while the West Coast may sit higher due to distribution costs.
Comparing New vs Refurbished MS 391
New units generally sit at a single price band around $399-$499, while refurbished models can fall to $250-$420 depending on bar length, cosmetic wear, and whether the chain and bar are included. Buyers may accept a slightly higher risk for substantial savings with refurbished chainsaws.
Per-Unit Pricing Details for Accessories
Consider per-item costs for common add-ons: a bar and chain combo can add $40-$90, a file kit $15-$30, and a bar cover $5-$15. If a dealer bundles a chain, bar, and fuel mix, the bundled price can be $60-$120 above the base unit.
Impact of Bar Length on Total Cost
Bar length changes the price. A 14″ bar may reduce the unit price by $20-$40 compared with a 16″ bar, while an 18″ bar commonly adds $20-$60 to the base price due to higher chain speed and torque requirements.
Maintenance Costs to Budget Over Time
Annual maintenance for the MS 391 typically costs $25-$60 for parts such as air filters, spark plugs, and fuel/oil mix; labor for professional tune-ups adds $60-$120 per service if performed by a shop, not counting major repairs.
Ways to Cut Price Without Ditting Down on Quality
Smart cost moves include choosing a standard 16″ bar, avoiding premium warranty add-ons, buying a bundled accessory kit, and comparing quotes from multiple dealers. A careful analysis can trim $30-$100 off a typical out-the-door price.