A Stihl TS 700 cutoff saw typically costs about $500-$1,000 used, while clean, tested examples or remaining new-old-stock listings can reach $1,200-$1,700. Price depends most on condition, included blade and accessories, seller type, and whether the saw can be inspected and started.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used TS 700 | $500 | $750 | $1,000 | Running saw, condition and hours vary |
| New-old-stock or dealer inventory | $1,200 | $1,450 | $1,700 | Availability and warranty vary |
| Replacement abrasive wheel | $15 | $30 | $50 | Wheel type and diameter affect price |
| Professional diamond wheel | $100 | $200 | $350 | Application and wheel size affect price |
What a running Stihl TS 700 usually costs
For a used TS 700 in ordinary working condition, a practical budget is $500-$1,000, with roughly $750 a reasonable midpoint before any repairs. A saw that starts easily, accelerates cleanly, cuts without excessive vibration, and includes a usable guard and water attachment tends to justify more than a non-running or incomplete unit.
New-old-stock pricing is less predictable because the model may not be available through every dealer. Listings around $1,200-$1,700 may reflect remaining inventory, seller markup, or included equipment rather than a standard current retail price. Confirm the exact model, operating condition, and included parts before comparing a listing with another TS 700.
Assumptions: U.S. prices before sales tax; used examples are complete and running, while new-old-stock availability varies by seller.
How engine repairs, wheels, and labor change the quote
A used saw’s asking price is only part of the purchase budget. Wear items and engine work can add substantially, so buyers should ask what has been replaced and whether the seller permits a cold start and test cut. Dealer service rates commonly fall around $90-$150 per hour, with minimum diagnostic charges often around $50-$120.
| Quote item | Low | Average | High | What changes the charge |
|---|---|---|---|---|
| Basic inspection or diagnosis | $50 | $85 | $120 | Shop minimum and troubleshooting time |
| Carburetor service | $100 | $200 | $350 | Cleaning versus replacement parts |
| Starter or clutch repair | $100 | $250 | $450 | Parts required and labor time |
| Abrasive wheel | $15 | $30 | $50 | Wheel diameter and cutting material |
| Diamond wheel | $100 | $200 | $350 | Concrete, asphalt, or other application |
A two-hour repair at $90-$150 per hour adds $180-$300 in labor, before parts. A low purchase price can disappear quickly if the saw needs engine work or several safety-related parts.
Why compression, cutting capacity, and included gear matter
Mechanical condition is the biggest price variable. Hard starting, weak acceleration, inconsistent idle, or poor compression can point to carburetor, ignition, or cylinder problems. Ask for a cold start rather than accepting a warm-running demonstration, and check for fuel leaks, damaged guards, loose handles, and excessive vibration.
The TS 700 is a high-displacement cutoff saw generally configured for a 14-inch wheel; confirm the guard and arbor fit the wheel being sold. A usable wheel, water connection, wrench, and manual can save $25-$200 in immediate purchases, depending on what is included. On a used saw, evidence of maintenance and a successful test cut matter more than cosmetic appearance.
Repair needs also change the effective price: a $600 saw needing $300 in work costs $900 before tax and accessories. If a seller cannot demonstrate operation, budget for inspection and potential repair rather than assuming the asking price represents a ready-to-use machine.
Which TS 700 listing offers better value?
A basic local-market used unit may be listed for $500-$700, but could lack a good wheel or have unknown service history. A tested example with a working water attachment and usable accessories may reasonably fall around $700-$1,000. Remaining new-old-stock at $1,200-$1,700 may appeal to buyers prioritizing unused condition, but should be checked for warranty coverage and return terms.
These are price scenarios, not guaranteed national quotes. Compare the total ready-to-work cost, including repairs, wheel, tax, and delivery, rather than judging by sticker price alone.
| Example | Estimated total | Included scope |
|---|---|---|
| Older running used saw | $575-$850 | $500-$700 saw plus $75-$150 inspection or basic parts |
| Tested used saw with wheel | $725-$1,050 | $700-$1,000 purchase; wheel condition varies |
| New-old-stock purchase | $1,250-$1,850 | $1,200-$1,700 saw plus tax or delivery |
How local supply and shipping affect TS 700 prices
Prices can vary with local contractor demand and the number of used saws available. A reasonable planning allowance is 5%-15% above a broad-market used price in high-demand urban areas or markets with limited inventory; rural listings may be cheaper but require travel or freight. These are budgeting differences, not fixed regional markups.
Shipping a heavy gas-powered saw may add roughly $40-$150, depending on distance, packaging, and carrier requirements. Local pickup lets a buyer inspect the machine before paying, while an online purchase should account for return costs and the seller’s description of condition. For a used TS 700, a short drive to verify a cold start can be worth more than a small listing discount.
What a shop can repair and how long it may take
A minor tune-up or diagnosis may take about one to two labor hours; a more involved carburetor, clutch, or starter repair can require two to four hours, depending on parts and shop workload. At $90-$150 per hour, that labor range is approximately $90-$600, before parts. Parts availability can extend turnaround for an older model.
Ask whether the estimate includes diagnosis, parts, and testing, and whether diagnostic fees are credited toward approved repairs. Get a written estimate before authorizing work if the repair total approaches the cost of another tested used saw.
How to lower the purchase price without buying a problem
Compare at least three listings using the same checklist: cold start, idle, throttle response, wheel guard, water connection, and included accessories. Request a video of startup and operation for remote listings, but treat it as a screening step rather than a substitute for inspection. Avoid paying extra for a wheel that is worn, damaged, or unsuitable for the planned cutting material.
Ask the seller to separate the saw price from accessories, and use missing gear or documented repair needs to negotiate rather than making an unsupported offer. A local shop inspection can help establish whether a discount covers likely work. Set a maximum all-in budget before negotiating, including tax, delivery, wheel, and repairs.
When a newer cutoff saw may cost less overall
A lower-priced used TS 700 is not always the least expensive choice if it needs repeated repairs or parts that are difficult to source. Compare its purchase-plus-repair estimate with a tested newer saw from a dealer, including warranty terms and the accessories each option requires. Newer equipment may cost more upfront, while a verified used machine can be economical when its condition and service history are clear.
For occasional cutting, renting may also be worth comparing; local rental rates often run about $75-$150 per day, with blade wear, deposits, and delivery potentially billed separately. For infrequent work, compare the rental total with the full ownership cost instead of comparing one day’s rent with the saw’s purchase price.