The Stihl TS 800 tile saw commands a mid-to-high price among professional tile cutting equipment. This article presents practical price ranges in USD, with factors that drive cost, and realistic quotes you can reference when budgeting. Expect main price drivers to include new versus used status, accessories, and regional labor or shipping charges. Understanding the TS 800 cost helps buyers estimate total expenditure from purchase to setup.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Stihl TS 800 Tile Saw (new) | $1,099 | $1,549 | $2,099 | Marketplace pricing; varies by retailer and season |
| Stihl TS 800 Tile Saw (demo/refurbished) | $700 | $1,100 | $1,400 | Warranty may differ; check seller |
| Delivery to job site | $50 | $150 | $300 | Distance-based |
| Attachment blades and accessories | $20 | $60 | $120 | Diamond blades, rips, and guides |
| Warranty extension (optional) | $80 | $180 | $280 | Typically 1–3 years |
Stihl TS 800 Tile Saw price by new versus used and what drives the gap
The typical new price for a Stihl TS 800 ranges from $1,099 to $2,099, depending on buy channel, included accessories, and regional promotions. A used or refurbished unit commonly lands between $700 and $1,400, with a higher excess if the unit shows heavy wear or missing parts. Assumptions: standard 14-inch blade, no major damage, normal cosmetics, U.S. mainland delivery.
Major cost components you’ll see in a TS 800 quote
Cost estimates break into material, labor, and delivery-related items. The following table outlines typical components and how they impact the total.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $150 | $300 | $500 | Diamond blades, water fittings, cooling media |
| Labor | $75 | $150 | $300 | Unpack, set up, blade alignment |
| Equipment | $0 | $0 | $0 | Included with new purchase |
| Permits | $0 | $0 | $0 | Usually none required for consumer purchase |
| Delivery/Disposal | $50 | $120 | $300 | Depends on distance and site access |
| Warranty | $80 | $180 | $280 | Optional extensions add cost but may reduce risk |
Which price drivers most influence the TS 800 total?
Two strong variables commonly swing quotes: blade setup and job scope. A 14-inch diamond blade is standard, but premium blades or multiple blades in a bundle can add $60–$180 to the material line. Job scope affects whether multiple saws or extended water pumps are included, potentially adding $150–$350 in labor and equipment rental. Assumptions: single-machine setup, standard blade.
Regional price differences for the TS 800 across U.S. markets
Prices can vary by region due to taxes, dealer promotions, and shipping costs. In higher-cost metro areas, expect the new unit near the upper end of the range, while rural or lower-demand markets may see discounts or bundled deals. A practical regional delta is roughly –10% to +15% relative to national averages. Assumptions: standard 14-inch blade, typical freight to a commercial address.
Labor and setup costs when bringing a TS 800 to a job
On-site setup, leveling, and blade calibration can add $75–$150 in labor for a typical tile crew. If the saw needs electrical hardwiring, water supply adaptations, or temporary containment, labor can rise to $200–$350. Assumptions: standard 1–2 hour setup, one technician, no site complications.
Compare the TS 800 with other tile saws by material and system type
Compared to lighter 10–12 inch models, the TS 800’s price reflects its 14-inch blade capability and higher motor power. Premium dust suppression, integrated water pumps, and easier curbside pickup may push price from the base $1,099–$1,549 to the $1,750–$2,099 range. Mid-range alternatives with similar build quality tend to fall in the $900–$1,350 band. Assumptions: comparable blade sizes; standard water delivery; no custom configurations.
Practical ways to reduce TS 800 cost without compromising safety or reliability
Cost-conscious buyers can control price by choosing a single-blade kit instead of bundles, selecting standard blades rather than premium variants, and coordinating delivery with other purchases to lower freight. Consider opting for a certified refurbished unit with remaining warranty, or negotiating free-blade promotions. Assumptions: standard safety gear, no extended service plan.