The Stihl TS420 concrete saw price reflects a combination of engine power, blade size, and available features. This article breaks down typical costs, from purchase price to common add-ons, to help budgeting for a TS420 purchase or rental. Prices shown are in USD and consider common regional variations and standard equipment packages.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Stihl TS420 concrete saw (new) | $1,099 | $1,349 | $1,599 | Base unit with standard blade and requires blade guard; excludes tax |
| Stihl TS420 rental (24 hours) | $125 | $180 | $260 | Delivery not included; depends on location |
| Common blade (2.5–14 in.) | $25 | $45 | $85 | Diamond blades vary by grit |
| Consumables (filters, oils, fluids) | $15 | $40 | $75 | Regular maintenance cost |
| Warranty/extended warranty | $0 | $70 | $180 | Depends on dealer and plan |
Assumptions: Midwest labor rates, standard 14-inch blade, typical mid-range model stock, regional freight, and normal access.
Direct Price Range for Stihl TS420 Concrete Saw
Typical total cost for a new TS420 falls in the $1,099 to $1,599 range, depending on dealer promotions, bundled accessories, and taxes. For users who prefer rental, expect about $125 to $260 per day, depending on location and included delivery. Per-unit blade costs often run $25 to $85, with higher ranges for premium or diamond blades. Initial outlay favors a new unit rather than a used model, which can be lower but carries higher risk for wear and potential downtime.
Major Cost Components in a TS420 Quote
The quote for a TS420 purchase or rental typically breaks into four to six elements. Materials and blade options drive the largest share; labor and permits are usually minimal for a straightforward buy.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (blade, guards, fluids) | $40 | $70 | $120 | Diamond blades cost more |
| Labor (assembly, delivery) | $0 | $40 | $110 | Depends on vendor |
| Equipment | $0 | $0 | $0 | Included with most new units |
| Delivery/Installation | $0 | $25 | $60 | Local delivery ranges |
| Warranty and service | $0 | $70 | $180 | Extended plans vary by region |
| Taxes and fees | $0 | $20 | $90 | State and local differences apply |
Assumptions: Standard 14-inch blade, Midwest region, no expedited delivery, retail channel purchase.
Size and Engine Type Influence on TS420 Price
Engine power and blade diameter are the primary drivers of price. A TS420 with a standard 14-inch blade and basic filtration system sits at the lower end, while upgrades like premium filtration, higher flow lubricants, or longer extension blades push price up. Expect roughly a 5–15% price lift for upgraded parts compared to a base model.
Regional Price Variations Across the U.S.
Prices drift by state due to sales tax, freight, and dealer competition. In the West Coast, add-ons or delivery surcharges can add 5–10% to the base price, while the Southeast may see tighter promotions and mid-range pricing. In major metro areas, rental may land toward the higher end of the band due to service charges.
Maintenance and Spare Parts as Ongoing Costs
Ongoing costs include filters, fluids, and occasional blade replacements. A standard consumables kit runs about $15–$40, and a maintenance login (oil, air filter, spark checks if applicable) can add $40–$100 per service cycle. Diamond blades for concrete cutting commonly cost $40–$85 per blade, with replacement depending on cutting frequency and material hardness.
Ways to Reduce TS420 Costs Without Compromising Safety
To trim price, consider buying a well-maintained used unit from a reputable dealer, or lease with maintenance included. Bundle blade upgrades with a factory warranty to avoid later replacement costs. Focus on selecting standard blades rather than premium hybrids for routine jobs, and plan deliveries during off-peak hours to reduce freight surcharges.
New vs Refurbished TS420: Which Fits the Budget?
New units provide full warranty and latest safety features, typically commanding the high end of the price band. Refurbished models can be 15–35% cheaper but may carry shorter warranties and higher risk of hidden wear. Do a trusted inspection and request a service history before buying a refurbished TS420.
Delivery, Disposal, and Handling Fees for Concrete Saws
Delivery is often a modest add-on in a local market, commonly $25–$60, with larger orders or longer rental periods attracting higher charges. Disposal or return of spent blades and fluids may incur $0–$20 if included in a rental package. Plan for a small handling fee if the dealer requires signature or setup assistance.
Role A: What Buyers Usually Pay for the TS420
Typical totals include the base price for a new TS420, plus blade costs, fluids, and a standard warranty. Average total outlay for a new TS420 with a mid-range blade is around $1,300–$1,450. Rental options may total about $150–$230 per day when delivery is included, while a mid-range diamond blade adds $40–$70 per unit of blade life used.
Role B: Quote Components By Cost Area
A representative quote breaks down into 5 main areas. The table below shows common ranges you’ll see on quotes for the TS420.
| Area | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $40 | $70 | $120 | Bands include guards, fluids, and basic blade |
| Labor | $0 | $40 | $110 | Delivery setup or assembly time |
| Delivery/Setup | $0 | $25 | $60 | Local vs regional |
| Warranty | $0 | $70 | $180 | Standard vs extended |
| Taxes/Fees | $0 | $20 | $90 | Varies by state |
Role C: Key Variables That Alter the TS420 Quote
Two impactful drivers are blade choice and job scale. For blade choice, switching from a standard abrasive to a premium diamond blade can add $20–$50 per blade and extend life. For job scale, cutting larger volumes increases blade wear and fuel usage, potentially increasing total costs by 10–25% on longer projects. Region and rental duration are the other two levers that shift final pricing.
Role D: Practical Ways to Reduce the TS420 Price
Control scope by choosing the right blade size and avoiding unnecessary upgrades. Schedule deliveries during non-peak hours and compare at least two dealers. Consider refurbishments with a clear warranty and disable add-ons that do not affect performance for routine cutting tasks. If replacement is necessary, batch smaller jobs together to justify a longer rental period and reduce per-day costs.