Pricing for stone coated metal shingles varies by panel size, surface texture, and installation specifics. This guide shows typical cost ranges and what drives the price, so buyers can estimate total project spending for a residential roof replacement or upgrade.
Introduction Note: The price you pay includes materials, labor, permits if required, and disposal. The cost can swing based on roof pitch, existing roof removal, and regional labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Material cost (stone coated panels) | $7,000 | $12,500 | $18,000 | Per roof, typical 1,500–2,000 sq ft |
| Installation labor | $4,000 | $7,500 | $12,000 | Carpentry prep, underlayment, fastening |
| Removal of old roofing | $1,000 | $3,000 | $5,000 | Guarded by roof size and disposal fees |
| Permits and inspections | $150 | $1,200 | $2,000 | Region-dependent |
| Delivery and staging | $200 | $600 | $1,400 | Distance from supplier |
Assumptions: Midwest labor rates, standard architectural shingles underlayment, normal roof access, standard 20–22 gauge panels.
Typical price range for stone coated metal shingles by roof size
For a common single-family roof around 1,500–2,000 sq ft, the total installed cost often lands in the $11,000 to $28,000 range. Material and labor are the primary drivers, with larger or steeper roofs pushing toward the higher end.
The cost per square (1 square = 100 sq ft) usually falls between $700 and $1,400 for installed stone coated metal shingles, depending on finish texture and warranty level.
Assumptions: 1,500–2,000 sq ft roof, standard pitch, no unusual structural work, mid-grade finish.
What drives material costs for stone coated metal shingles
Stone coated metal shingles use steel or aluminum panels with a stone chip coating. Prices hinge on panel thickness, coating color, and the stone aggregate size. Typical material costs range from $4 to $9 per sq ft, with higher-end finishes reaching $9–$12 per sq ft installed when labor and accessories are included.
Consider panel gauge, coating warranty, and color-matched accessories as the main material levers.
Assumptions: Standard 26–29 gauge; mid-range color options; basic shake or slate texture.
Labor costs: what to expect for installation and prep
Labor for stone coated metal shingles includes roof removal, deck inspection, underlayment, fasteners, and sealing. Expect $3.50 to $6.50 per sq ft for installation labor, or roughly $3,500 to $13,000 for a 1,000–2,000 sq ft roof, depending on pitch and complexity.
Concrete pitch and roof complexity are key labor drivers.
Assumptions: 1–2 story home, no major structural repairs, standard permit process.
Regional price variation: how location affects your quote
Prices vary by region due to weather, accessibility, and contractor competition. The same installation may cost 10% to 25% more in high-cost markets like coastal California or the Northeast versus the Sun Belt. An additional 5% to 15% may apply if access is restricted or permits are more costly.
Region acts as a major decision point in your final quote.
Assumptions: urban or suburban markets; typical travel time for crews; standard permitting rules.
System type and warranty as price modifiers
Polymer-coated stone chips and different substrate options affect price. Higher-end systems offering extended warranty (50-year or lifetime) can add $2,000–$4,000 to the project total, but may reduce long-term replacement costs and energy bills.
Warranty tier correlates with upfront investment and long-term value.
Assumptions: mid-range warranty on standard aluminum or steel substrates.
Delivery, disposal, and site prep details that cut or add to costs
Delivery charges depend on distance from the supplier; disposal costs depend on debris volume and local landfill fees. On-site preparation like fascia and membrane upgrades adds $500–$1,800. If a full tear-off is unnecessary, expect savings but ensure ventilation is adequate.
Efficient staging and proper disposal help control the bottom line.
Assumptions: one-time removal; standard waste management options available.
Maintenance expectations and long-term ownership costs
Stone coated metal roofs offer long service lives (often 40–70 years). Ongoing maintenance is typically minimal but may include gutter cleaning and inspection after major storms. Expect annual maintenance costs to be minimal, with major repairs only if panels are damaged by severe weather.
Low maintenance can improve cost efficiency over decades.
Assumptions: no hail damage, standard climate; periodic inspections every 3–5 years.
Real-world quote scenarios to help budgeting
Scenario A: 1,600 sq ft roof, mid-range stone coated shingles, standard pitch. Material $7,500, labor $5,000, removal $2,000, permits $500, delivery $400. Total around $15,400 with a mid-range warranty.
Scenario B: 2,100 sq ft roof, premium finish, steep pitch, coastal region. Material $14,000, labor $9,500, removal $3,500, permits $1,200, disposal $700. Total around $29,900.
Scenario C: 1,200 sq ft roof, economy finish, simple pitch. Material $5,000, labor $4,000, removal $1,000, permits $200. Total around $10,200.
Assumptions: standard residential homes; local permit costs align with typical municipal schedules.
How to compare bids without getting surprised
Ask for itemized quotes that separate materials, labor, removal, permits, and disposal. Look for the same panel type, warranty, and underlayment across bids. A lower bid may rely on cheaper substrates or less underlayment, potentially increasing long-term costs.
Always compare the same scope and warranty levels.
Assumptions: identical roof area and access conditions in each bid.
Important: this article provides ranges to help estimate cost for stone coated metal shingles; exact quotes will vary by market, roof complexity, and contractor pricing.