A La Marzocco Strada espresso machine typically costs about $25,000-$45,000 for the machine, with larger or highly configured systems sometimes exceeding $50,000. Group count, model, electrical requirements, freight, installation, and accessories determine the delivered price; dealer quotes may also exclude tax and plumbing work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Two-group Strada machine | $25,000 | $32,000 | $40,000 | Model and configuration affect price |
| Three-group Strada machine | $35,000 | $43,000 | $52,000 | Premium configurations can cost more |
| Installed commercial setup | $28,000 | $38,000 | $60,000+ | May include freight, setup, and site work |
What a La Marzocco Strada Espresso Machine Costs
For a standard U.S. cafe purchase, budget roughly $25,000-$40,000 for a two-group Strada and $35,000-$52,000 for a three-group machine, before unusual construction work. A practical planning average is about $32,000 for two groups or $43,000 for three, excluding tax and some accessories. These are budgeting ranges, not fixed manufacturer list prices; dealers price by model, options, availability, and market.
That works out to roughly $12,500-$26,000 per group for the machine alone, depending on size and configuration. Assumptions: new commercial equipment, standard finish, normal dealer delivery, and no major electrical or plumbing upgrades. For a complete opening budget, reserve more than the equipment quote alone.
Two- and Three-Group Strada Quotes Include
A dealer proposal may cover the espresso machine but list freight, water treatment, startup, and site preparation separately. Compare the same scope across quotes, particularly whether the price includes commissioning and operator instruction. The component ranges below are planning estimates; some charges are bundled into a dealer package.
| Quote component | Typical range | Pricing basis | Usually covers |
|---|---|---|---|
| Strada machine | $25,000-$52,000 | Per machine | Model, group count, selected options |
| Labor and commissioning | $500-$2,000 | Per installation | Placement, connections, calibration |
| Freight and delivery | $300-$1,500 | Per shipment | Crating and delivery distance |
| Water filtration | $300-$1,200 | Per system | Filter and installation components |
| Electrical or plumbing work | $500-$5,000+ | Per site | Dedicated circuits, drains, or water lines |
Commercial plumbing and electrical work can rise sharply when existing connections are poorly located or undersized. Ask whether labor, freight, filtration, and startup are included before comparing bottom-line totals.
Group Count, Voltage, and Finish Change the Quote
Moving from two groups to three can add around $8,000-$15,000, but the exact premium depends on model and options. A busy shop may justify the capacity; a lower-volume bar may pay for unused output. Confirm the machine’s electrical specifications with the dealer and a qualified electrician before ordering, since circuit changes can add hundreds or several thousand dollars.
Custom colors, trim, or special-order configurations may add roughly $500-$3,000 or more and can affect lead time. A typical commercial water-treatment package costs about $300-$1,200, while advanced filtration or site-specific treatment may cost more. Group count and building readiness usually matter more to the total than cosmetic upgrades.
How Much Do Installation and Commissioning Add?
Professional placement, connection, calibration, and startup commonly run $500-$2,000 when the site is ready. Installers may charge approximately $75-$150 per hour, with travel, after-hours scheduling, or a minimum service call raising the bill. A straightforward installation may take 3-6 labor hours; difficult access, additional trades, or corrective work can extend the schedule.
Counter reinforcement, long water-line runs, drainage changes, or a new electrical circuit are usually separate contractor expenses. Site work can add $500-$5,000 or more, especially where walls or floors must be opened. Have the dealer confirm utility requirements and inspect the installation location before delivery.
U.S. Dealer Pricing by Market
Regional price differences often reflect labor, freight, and dealer service coverage rather than a consistent machine discount. High-cost coastal metro areas may land about 5%-15% above a comparable quote in a lower-cost market after installation and local work. Rural buyers may see freight or technician travel add $200-$1,000, even if local labor rates are lower.
Taxes are additional where applicable and vary by state and locality. Delivery, commissioning, and warranty support can also differ by dealer territory. Compare delivered and installed totals, not just the machine price shown on a quote.
What Extra Equipment Can Add to a Strada Budget?
A commercial grinder may add approximately $1,500-$4,000 per unit, and a high-volume bar may need more than one. Water filtration is often essential to protect equipment and manage beverage quality; budget $300-$1,200 for a typical setup. Knock boxes, tampers, pitchers, and small bar tools can add another $300-$1,500 depending on quantity and grade.
Older equipment removal or disposal may cost $100-$500, while complicated disconnection can cost more. A service plan, if offered, may add several hundred dollars or more per year depending on coverage. Keep the Strada quote distinct from the grinder, water system, and bar-tool budget.
Strada AV, S, and X Pricing Compared
Strada versions differ in controls, workflow, and available configuration, so the model name alone does not establish a firm price. As a broad budgeting comparison, a two-group configuration may fall around $25,000-$40,000, while premium or more feature-rich builds can approach or exceed the upper end. Three-group versions commonly budget at $35,000-$52,000 before site expenses.
Dealer availability and selected options can change those ranges, and model offerings may vary. Request a written specification showing model, group count, included controls, warranty, freight, and commissioning. Compare identical configurations rather than treating AV, S, or X as a simple price ladder.
Where Can Buyers Trim a Commercial Strada Quote?
Choose group capacity based on peak drinks per hour rather than the largest model available. Standard finishes, essential accessories, and a ready installation site can limit add-on expenses without reducing core machine capability. If a shop already has suitable filtration or electrical service, verify compatibility before paying for duplicate work or equipment.
Request at least three itemized dealer quotes and ask about delivery, startup, warranty terms, and service response. Consider a professionally inspected used unit only after confirming age, maintenance records, parts availability, and warranty coverage; purchase savings can be offset by repairs. Controlling capacity, options, and site preparation is usually more effective than negotiating only the machine line.