A Sundance Cameo 880 typically costs about $18,000-$27,000 before optional upgrades, with the final price driven by dealer discounts, electrical work, delivery access, and site preparation. A complete installed budget often lands around $20,000-$32,000, especially when a new concrete pad or longer electrical run is needed.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Cameo 880 spa | $18,000 | $22,500 | $27,000 | Dealer price varies by market and package |
| Delivery and placement | $300 | $700 | $1,500 | Higher with crane access or difficult placement |
| Electrical connection | $800 | $1,600 | $3,500 | Assumes a dedicated 240-volt circuit |
| Pad and site work | $0 | $1,200 | $4,000 | Existing level, reinforced base can avoid new work |
| Installed total | $20,000 | $25,500 | $32,000 | Excludes unusual access and major landscaping |
What a Cameo 880 quote usually includes
The Cameo 880 is a premium, roughly 7-foot-7-inch-square spa designed for six to seven adults. The spa price generally includes the cabinet, cover, filtration components, and standard delivery within the dealer’s service area, but the quote should specify exactly what is included.
For a standard package and straightforward placement, a realistic spa-only budget is $18,000-$27,000. A midrange quote near $22,500 is a useful comparison point, not a fixed national price. Options, promotions, taxes, and dealer inventory can move the actual figure. Assumptions: standard Cameo 880 configuration, U.S. dealer purchase, normal access, and no major site construction.
How the spa, electrician, and pad shape the bill
The equipment is usually the largest line item, while electrical and site work depend on the property. Ask dealers to separate these charges so a lower advertised spa price does not conceal a higher installation estimate.
| Quote component | Typical range | What changes the charge | Pricing unit |
|---|---|---|---|
| Spa and standard package | $18,000-$27,000 | Dealer, options, included cover or steps | Per spa |
| Electrical labor and materials | $800-$3,500 | Panel capacity, route length, code needs | About $75-$150 per hour for electrician labor |
| Delivery and positioning | $300-$1,500 | Distance, steps, crane, access width | Per delivery |
| Concrete or reinforced pad | $500-$2,500 | Excavation, thickness, drainage, local rates | About $8-$18 per sq ft for basic concrete work |
| Removal and disposal | $200-$800 | Old spa size and haul distance | Per unit |
Electrical work commonly requires a dedicated 240-volt circuit, with breaker and wiring specifications confirmed by the dealer and electrician for the exact model configuration. Request separate labor, materials, delivery, and site-preparation amounts before comparing total quotes.
Which electrical and access details change installation
Panel capacity and wire distance can change the electrician’s estimate substantially. A short run of 20-30 feet with adequate service may cost around $800-$1,500; a run beyond 50 feet, panel upgrade, trenching, or additional code work can push it above $2,500.
Access is another Cameo-specific consideration because the spa is a large, heavy unit. A clear route at least as wide as the delivery plan requires may allow ordinary placement, while fences, tight turns, stairs, or overhead obstructions can require a crane and add several hundred to more than $1,000.
Confirm the delivery path and electrical plan before accepting an installed-price estimate. The dealer should verify filled operating weight and the required supporting surface; a deck may need a structural assessment rather than an assumption that it can hold the spa.
Why regional dealer quotes differ by thousands
Dealer pricing, electrician rates, sales tax, and delivery coverage vary across the United States. Major metro areas and high-cost coastal markets may run roughly 10%-20% above a typical quote, while some lower-cost or competitive markets may come in 5%-15% below it.
These are planning comparisons, not guaranteed regional price bands. Freight distance, local labor availability, state or local taxes, and whether the dealer has the model in stock matter more than a broad regional label. Compare at least two written, similarly scoped quotes from dealers serving the same area.
What electrical labor and delivery time add
Electricians often charge about $75-$150 per hour, and a straightforward hookup may take 4-8 hours after materials are on site. Complicated routing, trenching, or a panel change can require a longer visit or separate permit and inspection appointments.
Delivery and placement may take a few hours when access is clear. Crane delivery requires coordination, a suitable setup location, and sometimes a street-use permit. Check whether the dealer’s delivery charge includes positioning, startup, and a basic owner walkthrough.
Which extras are worth adding to the Cameo 880 quote
Steps, a lifter, upgraded cover, water-care supplies, and a start-up kit can add roughly $300-$1,500 together, depending on product quality and what the dealer includes. A replacement cover alone may cost about $400-$900, while a quality cover lifter often adds $200-$500.
Old-spa removal is commonly $200-$800 when the crew can reach it easily. Difficult dismantling or disposal may cost more. Ask for optional accessories and removal as separate line items rather than accepting an unexplained package charge.
How to lower the Cameo 880 installed price
Keep the project on an existing level, load-bearing pad when it meets the manufacturer’s requirements, and position the spa near the electrical panel where practical. Avoid paying for deck construction or landscaping until the installation requirements and access route are confirmed.
Compare the same configuration, cover, delivery scope, electrical allowance, and tax treatment across dealer quotes. Ask about in-stock units and seasonal promotions, but verify that a discount does not remove setup or warranty-related services. The most reliable savings come from controlling site work and comparing complete installed totals, not just the advertised spa price.
Is a used Cameo 880 cheaper after installation
A used Cameo 880 may cost about $5,000-$12,000 depending on age, condition, and included accessories, but relocation, electrical reconnection, and repairs can add $1,500-$5,000. A private sale may also lack dealer delivery and the support included with a new purchase.
Before buying used, budget for inspection and confirm that the pumps, heater, controls, shell, and plumbing operate without leaks. A new spa’s higher upfront price may be more predictable when the used unit needs major repairs or a fresh cover. Compare the used spa price plus transport and repair estimates against a complete new-unit installation quote.