A Sundance Claremont 980 typically costs about $19,000-$27,000 for the spa, with a delivered and installed total often reaching $21,000-$32,000. Dealer location, electrical work, site access, delivery distance, and upgrades can shift the quote substantially; the figures below are planning estimates, not a fixed manufacturer price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Claremont 980 spa | $19,000 | $23,000 | $27,000 | Typical dealer price before major site work |
| Delivery and placement | $500 | $1,100 | $2,500 | Higher for difficult access or a crane |
| Electrical installation | $1,000 | $2,000 | $4,000 | Assumes a 240-volt circuit; panel work can add cost |
| Typical installed project | $21,000 | $26,000 | $32,000 | Excludes major deck or landscaping construction |
Assumptions: U.S. dealer pricing, a standard new spa, normal delivery access, and a prepared, level location.
What a Claremont 980 spa usually costs
For the spa itself, budget roughly $19,000-$27,000 before taxes and substantial installation work. A middle-of-the-range quote is about $23,000, though local promotions, included accessories, and dealer package terms may change the effective price. This is a premium seven-person hot tub, so its purchase price is not comparable to a small plug-in spa.
Most buyers should plan around $26,000 for a straightforward purchase and installation. That estimate assumes the yard or patio is already suitable, the delivery team can reach the placement area, and a qualified electrician can connect the unit without replacing the service panel. Sales tax and optional site improvements may raise the final invoice.
How the spa, wiring, and delivery shape the quote
A dealer quote can combine the spa, delivery, accessories, and setup, so the line items matter as much as the headline price. Ask whether the quoted amount includes placement, startup, a cover, steps, and removal of an old tub. Electrical work is often contracted separately.
| Quote component | Typical price | What changes it | Usually included? |
|---|---|---|---|
| Claremont 980 spa | $19,000-$27,000 | Dealer, package, and promotions | Core unit |
| Delivery and placement | $500-$2,500 | Distance, access, crane use | Sometimes |
| Electrical labor and materials | $1,000-$4,000 | Wire run, panel capacity, trenching | Often separate |
| Base and site preparation | $0-$3,000 | Existing concrete, leveling, excavation | Rarely |
| Steps, cover lift, and extras | $300-$1,500 | Accessory selection and bundle | Varies |
Electrical and access costs can add several thousand dollars even when the spa price is competitive. Electrician labor commonly runs $75-$150 per hour, with materials and permit charges added where required.
Which Claremont 980 installation details raise the price?
The biggest cost changes usually come from the site, not the model name. A short circuit run of 25 feet or less may be relatively simple; runs longer than 50 feet can require more wire, conduit, or trenching. If the existing electrical panel lacks capacity, a panel upgrade can add about $1,500-$4,000 or more.
Access also matters. A clear, ground-level route may fit within routine delivery pricing, while narrow gates, stairs, retaining walls, or an overhead lift can add $500-$2,000. A spa pad must support the filled unit and occupants; replacing a small or uneven patio may cost $500-$3,000 depending on excavation and concrete work.
Measure the route and confirm panel capacity before comparing final quotes. Local electrical rules may require a permit or inspection, commonly adding $50-$500, depending on the jurisdiction and project scope.
Does a 240-volt wiring run change installation labor?
Yes. A standard 240-volt connection requires a properly sized dedicated circuit and a suitable disconnect installed according to local code and the spa’s specifications. A straightforward installation may take an electrician about 4-8 hours; a long buried run, panel upgrade, or difficult wall access can extend the work to 1-2 days.
At approximately $75-$150 per hour, 4-8 hours of labor equals $300-$1,200 before wire, conduit, disconnect hardware, permit fees, or travel charges. That is why a complete electrical quote may be $1,000-$4,000 rather than just an hourly labor bill. Confirm that the contractor has accounted for both materials and inspection requirements.
Request a written electrical estimate based on the actual distance from the panel to the spa. A quote that assumes a short surface-mounted run may not hold if the chosen location requires trenching or upgraded service.
How Claremont 980 prices vary across U.S. regions
Dealer pricing and labor rates differ by market. As a planning comparison, a high-cost coastal metro may come in about 10%-20% above a typical national-area quote, while some rural markets may be 5%-15% lower. Those differences are not guaranteed: limited dealer competition, long freight routes, or a crane requirement can make a rural delivery more expensive.
In colder regions, buyers may also spend more preparing a year-round site, particularly if access is muddy or frozen during delivery season. Local taxes affect the out-the-door total, and dealer promotions can offset part of the regional difference. Compare the same package and installation scope rather than comparing advertised spa-only prices with complete installed quotes.
Use regional percentages as a budget adjustment, not as a substitute for local written bids. Request itemized pricing from nearby authorized dealers and ask whether freight, startup, and tax are included.
Which upgrades and site extras add to the total?
Common add-ons include a cover lift, steps, upgraded water-care equipment, a replacement cover, and additional landscaping. A basic accessory package may add $300-$800; several premium accessories or water-treatment upgrades can push extras to $1,500 or more. Ask whether a package price includes the items or lists them separately.
Old-spa removal may cost about $300-$1,000 when access is simple. Tight access, cutting up the tub, or extra disposal charges can raise the bill. A crane is a separate expense, often around $500-$2,000 depending on local rates, lift distance, and setup needs. Deck reinforcement or new construction is not included in the typical installed estimate.
Get separate prices for optional equipment, removal, and structural work before approving a bundle. That makes it easier to identify necessary work and compare dealer offers on an equivalent basis.
How to lower the Claremont 980 project price
Prepare a level, accessible installation area before delivery and choose a location that minimizes the electrical run. A shorter route can reduce wire, conduit, and labor costs; confirming access in advance can prevent a costly crane or a failed delivery attempt. Check whether an existing concrete pad is suitable rather than paying for replacement without an assessment.
Compare at least three written quotes with the same spa configuration and list of included items. Ask each dealer to show the spa-only price, delivery, startup, accessories, and any discounts separately. If the quote includes extras that are not needed immediately, price them individually rather than assuming the bundle is cheaper.
The most dependable savings come from controlling site work and comparing like-for-like installed quotes. Avoid choosing a low advertised price until delivery, electrical labor, taxes, and required permits are accounted for.