A SunSetter awning typically costs about $1,500-$5,500, depending on whether it is manual or motorized, its width, and installation needs. A standard motorized model with professional installation often lands near $3,500, while larger units and options such as a hood or lighting raise the estimate.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Manual awning | $1,500 | $2,500 | $3,500 | Product price; installation may be extra |
| Motorized awning | $2,200 | $3,500 | $5,500 | Varies by width, fabric, and controls |
| Professional installation | $400 | $800 | $1,500 | Depends on access and mounting surface |
| Installed project | $2,000 | $3,700 | $7,000 | Includes typical equipment and labor |
SunSetter awning prices by model and width
For a typical 10- to 16-foot-wide awning projecting about 8 to 11 feet, a manual model may cost $1,500-$3,500 before installation. Motorized versions commonly run $2,200-$5,500 before labor. Installed totals for ordinary wall mounting are often $2,000-$5,000 for manual and $2,800-$7,000 for motorized systems.
A standard motorized installation generally budgets around $3,500-$4,500. Actual offers can vary with promotions, dealer pricing, fabric selection, and whether the quote includes delivery, mounting, and electrical work. Assumptions: U.S. suburban home, standard acrylic fabric, sound mounting surface, normal access.
What the awning quote includes for fabric and labor
Quotes may combine the awning frame, fabric, motor, controls, delivery, and installation, so buyers should check whether each item is included. The table shows typical budget shares for a motorized installation; costs can overlap when a retailer sells a bundled package.
| Quote component | Typical range | Pricing basis | What changes it |
|---|---|---|---|
| Frame and fabric | $1,500-$3,500 | $100-$220 per awning-width ft | Width, fabric, and model |
| Motor and controls | $300-$900 | $300-$900 per system | Remote or sensor options |
| Installation labor | $400-$1,500 | $75-$150 per labor hour | Crew size and wall access |
| Delivery and disposal | $0-$300 | $0-$300 per job | Distance and old awning removal |
| Electrical work | $150-$600 | $150-$600 per connection | Outlet distance and wiring route |
Labor is often a two-person job taking about 3-6 hours for straightforward mounting. Confirm whether electrical connection and delivery are part of the quoted installed price.
How width, projection, and mounting change the price
Width is a primary cost driver: moving from a 10-foot unit to a 16-foot model can add roughly $500-$1,500, depending on model and fabric. A projection near 11 feet may cost more than a shorter projection because it requires a larger frame and more material. Prices also vary by model configuration, not just the awning’s measured width.
Mounting conditions can create a larger labor difference than fabric choice. Installation on a sound, accessible wood-framed wall is usually simpler than attaching to brick, stone, or a surface requiring structural reinforcement. If the mounting point is more than 12 feet above grade or needs special access equipment, labor or equipment charges may add $200-$800. Ask the installer to inspect the wall and state the mounting method in the quote.
Is motorized operation worth the extra cost?
A motorized setup commonly adds $300-$900 over a comparable manual configuration, before any optional sensor or electrical work. It can be useful for a wide awning or frequent operation, but a manual crank avoids motor replacement expense and may suit a smaller, easily reached unit. Wind sensors and other controls can add roughly $150-$500, depending on the package.
For a house with an existing outdoor outlet near the mounting location, electrical costs may be modest. A new circuit or a long concealed wire run can add $300-$1,000 or more. Compare the motor upgrade and wiring as separate quote lines rather than accepting a single unexplained premium.
When removal, wiring, or difficult access adds charges
Removing an existing awning may add $100-$400, with disposal sometimes included and sometimes billed separately. New wiring can cost $150-$600 for a simple connection but rise to $1,000 when a circuit, long run, or finished-wall repair is needed. A second-story installation, narrow access, or a need for lift equipment can add $200-$800.
Permit requirements depend on local rules and the work involved; a basic retractable awning may not require a permit, but electrical changes or structural alterations can. HOA approval may also apply to visible exterior changes. Check these requirements before paying a deposit, since late changes can delay installation or increase labor.
Regional labor rates shift installed awning totals
Labor and delivery can make an otherwise similar project cost more in high-cost metro areas. As a planning estimate, installed pricing may run 10%-20% above a national midpoint in major coastal cities, while some rural markets may be 5%-15% lower when installers are nearby. Remote locations can reverse that advantage if travel or freight charges apply.
Seasonal demand also affects contractor availability. Spring and early summer are busy periods in many regions, while fall scheduling may be easier; timing does not guarantee a discount. Compare local installed quotes for the same width, model, fabric, and electrical scope.
Three installed SunSetter budgets for common patios
A 10-foot manual awning with standard fabric and simple wall mounting might total $2,000-$3,200, including about $400-$800 in labor. A 14-foot motorized unit with a remote and ordinary installation may total $3,200-$5,000, with labor of roughly $600-$1,000. A 16- to 20-foot motorized model with a sensor, difficult access, and new wiring can reach $5,000-$7,500.
These examples assume no major framing repair and standard delivery. A quote below the ranges may exclude installation or electrical work; a higher one may include premium options, complicated mounting, or local labor premiums. Compare the final installed total, not only the advertised awning price.
Ways to lower the SunSetter installation bill
Choose only the width and projection needed to shade the seating area, and compare manual operation with motorized convenience before upgrading. Standard fabric and controls can keep the equipment price down; add sensors or lighting only when their function justifies the additional charge. If the wall is accessible and structurally sound, that can reduce installation time.
Request at least two itemized quotes using the same model and dimensions. Ask about delivery, removal, wiring, warranty, and possible extra charges for masonry or elevated work. Scheduling outside the local peak season may improve availability, though savings are not guaranteed. A clear scope prevents optional upgrades and overlooked labor from inflating the budget.