A Therapool 13 swim spa typically costs about $25,000-$40,000 for the unit, with an average dealer price near $32,000 before site work and tax. A complete installed project often reaches $32,000-$55,000, depending on delivery access, electrical work, foundation, local labor, and the options included in the quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Therapool 13 unit | $25,000 | $32,000 | $40,000 | Dealer pricing varies by package and market |
| Delivery and placement | $800 | $1,800 | $4,000 | Higher if a crane or difficult access is needed |
| Electrical installation | $1,500 | $2,500 | $4,500 | Depends on panel capacity and wiring distance |
| Base and site preparation | $1,000 | $2,500 | $6,000 | Concrete, grading, or excavation can change the total |
| Installed project | $32,000 | $42,000 | $55,000+ | Before sales tax; major construction may add more |
Assumptions: U.S. dealer purchase, residential outdoor placement, standard access, and no major landscaping or structural work.
What a Therapool 13 Usually Costs Before Installation
For the spa itself, budget $25,000-$40,000, with many standard-package quotes landing around $29,000-$35,000. This range is an estimate, not a guaranteed manufacturer price: dealers may bundle delivery, steps, cover, water-care supplies, or setup differently, and model-year inventory can affect the offer.
The Therapool 13 is a compact swim spa compared with longer, higher-capacity models. Its purchase price reflects the molded shell, pumps, filtration, heating system, swim-current equipment, controls, and insulation. The exact configuration and included features should be confirmed on the written quote rather than assumed from a model name.
A realistic starting budget is about $32,000 for the spa and roughly $42,000 for a straightforward installed project. A site requiring a crane, new concrete, a long electrical run, or extensive excavation can exceed the high end.
Prices may be advertised before delivery, taxes, or installation. Ask whether the quote includes those items and whether the stated amount is cash pricing, promotional financing, or a package price tied to additional purchases. A low advertised figure may represent the spa only.
How the Shell, Delivery, Electrical, and Base Shape the Quote
Equipment and labor costs vary by location and site. The table gives practical planning ranges for a typical residential installation; it does not imply every dealer quote separates costs this way. Confirm who is responsible for each task, especially unloading, electrical permits, and the finished pad.
| Quote component | Typical price | What changes the amount | Unit basis |
|---|---|---|---|
| Spa and standard equipment | $25,000-$40,000 | Package, options, dealer pricing | Per unit |
| Delivery and set | $800-$4,000 | Distance, access, crane, crew | Per delivery |
| Electrical work | $1,500-$4,500 | Panel, disconnect, route, permit | Per installation |
| Pad and grading | $1,000-$6,000 | Area, soil, drainage, concrete | Project total |
| Steps, cover, and accessories | $300-$2,000 | Included items and upgrade level | Per package |
| Sales tax and permit fees | $0-$3,500+ | Tax jurisdiction and local rules | Varies by location |
Electrical work commonly requires a dedicated circuit and an outdoor disconnect installed to local code. Depending on the unit’s nameplate requirements and local rules, an electrician may need to upgrade a panel or extend wiring from the house. Obtain the exact electrical specifications for the delivered configuration before accepting an estimate.
Delivery access and electrical scope are often the biggest expenses after the spa itself. Electricians may charge about $75-$150 per hour, while a separate delivery or placement crew may be billed as a fixed service.
Why Access, Electrical Distance, and Features Change Price
Access can shift delivery from a standard $800-$1,800 placement to $2,500-$4,000 or more when a crane, specialized rigging, or a larger crew is needed. A narrow gate, overhead wires, steep slope, or a backyard reachable only over a house can require a site visit before delivery is scheduled.
Electrical distance is another measurable cost driver. A short route of about 20-30 feet from a suitable panel may fit a basic installation budget; a 60-100-foot run, trenching, or a panel replacement can add roughly $500-$3,000 or more. Final costs depend on wire size, conduit, conditions, and code requirements.
Base preparation also varies with ground and project scope. A prepared, level concrete pad may cost around $8-$15 per square foot, while grading, drainage correction, or reinforced construction can raise the total. Confirm the spa’s filled weight and support requirements before selecting a surface; a small patio or deck should not be presumed adequate.
Optional packages and accessories may add $500-$3,000, depending on what is already standard. Compare the specific equipment list, cover type, steps, lighting, water-care system, and warranty terms. For a useful estimate, compare the delivered spa configuration and the site conditions—not just the model name.
Control Site Work and Package Choices to Lower the Price
Cost reductions usually come from avoiding unnecessary construction and comparing complete quotes. If a stable, accessible pad already meets the manufacturer’s specifications, it may eliminate much of the $1,000-$6,000 base-preparation allowance. Do not skip engineering or load checks to save money, particularly when considering an elevated deck or indoor location.
Ask dealers to list included accessories and price optional upgrades separately. If a standard cover, steps, or water-care supplies meet the intended use, declining premium versions may save several hundred dollars or more. Compare warranties and operating requirements before removing an item that protects equipment or is needed for safe access.
Get at least three written quotes using the same configuration and delivery address. Ask each dealer to state the unit price, freight, crane allowance, electrician scope, permit responsibility, startup service, and tax separately. A quote that is $1,000 lower but excludes delivery or electrical work may not be the cheaper project.
Scheduling can help when dealers are clearing inventory or when installation crews have open capacity, but discounts vary. Ask whether an in-stock unit has the same equipment and warranty as the quoted model. Preserving the required site work while trimming optional upgrades is usually safer than cutting foundation or electrical scope.
How Therapool 13 Prices Compare Across U.S. Markets
Dealer pricing and installation labor differ by region. As a planning estimate, a spa purchase in a lower-cost market may be 5%-10% below a comparable quote in a high-cost metro, while a premium urban market can run 5%-15% above the national midrange. These are broad comparisons, not fixed regional price lists.
Freight distance, local dealer competition, sales volume, and available installers all contribute. In rural areas, the unit price may be competitive but delivery can cost more because the crew travels farther or requires special equipment. In dense neighborhoods, permits, access restrictions, and crane arrangements may outweigh a lower advertised unit price.
Installation labor can also vary. A straightforward electrical job might cost $1,500-$2,500 in many areas, while high labor rates, panel changes, or difficult trenching may push it to $3,000-$4,500. Request local bids for electrical and concrete work if the spa dealer does not provide a complete installed package.
Sales tax is generally calculated according to state and local rules, and treatment of delivery or installation charges can differ. A tax rate of 6%-10% on a $32,000 purchase would add about $1,920-$3,200 when the full purchase is taxable. Compare the final after-tax amount at the delivery address rather than relying on a national average.
What Three Therapool 13 Installation Quotes Can Include
These examples show how scope can produce different totals even when the spa price is similar. They assume ordinary residential use and exclude financing interest. Sales tax is shown as a planning allowance; actual tax treatment depends on location.
| Scenario | Scope and labor | Estimated total | Why it costs this much |
|---|---|---|---|
| Prepared patio | $29,000 spa; $900 delivery; 8-10 electrician hours at $90-$125; existing compliant pad | $31,500-$33,500 | Minimal construction and short wiring route |
| Typical backyard | $32,000 spa; $1,500 delivery; 12-16 electrician hours; $2,000-$3,000 pad work | $38,000-$43,000 | New concrete and standard electrical installation |
| Restricted access | $37,000 spa; $3,000-$4,000 crane delivery; panel work and 60-100-foot wiring; upgraded base | $48,000-$58,000+ | Crane, longer service run, and added site preparation |
The first example may still require small setup expenses, permits, water treatment supplies, or a disconnect. The third can rise further if the crane needs special road access, landscaping must be removed, or excavation reveals poor soil. Ask whether startup, water filling, and haul-away of packaging are included.
Use the installed total as the comparison number, then check that each bid covers the same work. A dealer’s “delivery included” language may only mean curbside delivery, not movement into the final position or crane placement.
When a Smaller Swim Spa or Traditional Pool Costs Less
A smaller swim spa can reduce the purchase and placement budget if the buyer does not need the Therapool 13’s particular length or seating configuration. Smaller models may cost several thousand dollars less, although the savings depend on equipment and dealer packages. Confirm the usable swim area and current system rather than comparing exterior dimensions alone.
A conventional above-ground pool may have a lower initial price, often several thousand dollars rather than a $25,000-$40,000 spa purchase. However, it does not provide the same year-round heated water, compact footprint, or integrated swim-current function. An in-ground pool typically costs substantially more to install and may require extensive excavation and landscaping.
Repairing an existing spa can be less expensive than replacement when the shell and major equipment remain sound. Pump, heater, or control repairs may fall around $300-$2,500 depending on parts and diagnosis, while multiple failed systems or a damaged shell can make replacement more practical. Get a written repair estimate and ask about parts availability before deciding.
Compare expected use and operating expenses as well as the initial quote. A swim spa’s heater and pumps consume electricity, with use affected by climate, water temperature, insulation, cover condition, and hours of operation. Ask a dealer for estimated energy use for the specific configuration and local utility rates instead of relying on a generic monthly figure.
How Long Delivery and Electrical Installation Take
Once the site is ready and the unit is available, a standard delivery and placement may take a few hours. Crane placement is often scheduled for a specific window and can take longer to coordinate, particularly where street permits, utility clearance, or traffic control are needed. Site preparation can add several days or weeks if concrete must cure or contractors are booked.
Electrical installation commonly takes 8-16 labor hours for a straightforward job, sometimes split between a site visit and final connection. A panel upgrade, long trench, or difficult route can take 16-30 hours or more. At $75-$150 per hour, labor alone for those extended cases may be $1,200-$4,500, before materials and permit charges.
Ask the dealer and electrician to coordinate the delivery sequence. The pad must be finished and accessible before the spa arrives, and the electrical contractor may need the model’s final wiring instructions. Missed coordination can result in rescheduling fees or storage charges, especially when a crane or specialized delivery crew is involved.
Build schedule and site readiness into the quote, not just the equipment budget. Confirm who inspects the route, who obtains permits, what happens if delivery is postponed, and whether the price includes positioning and initial system checks.
What to Verify Before Accepting a Dealer Quote
Check the exact model, equipment package, warranty coverage, and price expiration date. Dealers may quote promotional packages that change with inventory or season, and the same model name can be paired with different accessories. The written estimate should identify what is included rather than relying on verbal assurances.
Verify the manufacturer’s current installation requirements, electrical specifications, filled weight, and clearance needs. Ask whether the proposed pad, deck, indoor floor, and drainage plan meet those requirements. For structural work or uncertain soil, a qualified local professional may be needed before the unit is ordered.
Request a line-item estimate for delivery, crane service, electrical labor and materials, foundation, permits, tax, and any removal or landscaping. Also ask about a minimum service charge, travel fee, or change-order rate if site conditions differ from the initial assessment. Keep a 5%-10% contingency for minor surprises, or more for a project involving excavation or panel replacement.
A complete quote should make the $25,000-$40,000 spa price distinct from the full project total. That separation shows whether a dealer’s offer is genuinely lower and helps prevent delivery, code work, or site costs from appearing after the purchase contract is signed.