TimberTech French White Oak decking typically costs about $100-$160 per 16-foot board, or roughly $14-$22 per square foot for deck boards alone. A professionally installed deck often totals $40-$75 per square foot, depending on deck size, framing, access, labor rates, and whether an existing deck must be removed.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 16-foot deck board | $100 | $130 | $160 | Retail varies by seller and stock |
| Deck-board material | $14/sq ft | $18/sq ft | $22/sq ft | Before framing and installation |
| Installed deck | $40/sq ft | $55/sq ft | $75/sq ft | Typical contractor project range |
| 300-sq-ft deck | $12,000 | $16,500 | $22,500 | Installed, with standard access |
What French White Oak decking costs for a full deck
French White Oak is a TimberTech Advanced PVC color in the Vintage Collection. A 16-foot board generally covers about 6 square feet after allowing for board width and a small installation gap, so a material estimate of $14-$22 per square foot works out to about $2,100-$3,300 for 150 square feet of boards. Waste, stairs, borders, and fascia can increase the order.
For a complete 300-square-foot deck, a standard rebuild with sound framing may land near $12,000-$22,500 installed. A new structure, railings, stairs, or difficult site conditions can push the quote higher. Assumptions: U.S. contractor pricing, standard rectangular deck, normal access, and no major structural repairs. The board-only price is not the installed deck price; framing and labor account for a substantial share of the total.
Which materials and labor appear in a deck quote
Request an itemized estimate that separates decking from the supporting structure. PVC deck boards are only one part of the bill; fastening systems, fascia, railing, and demolition may be quoted separately.
| Quote component | Low | Average | High | Pricing basis |
|---|---|---|---|---|
| French White Oak boards | $14/sq ft | $18/sq ft | $22/sq ft | Deck surface area |
| Labor and installation | $12/sq ft | $20/sq ft | $30/sq ft | Layout and site complexity |
| Framing and substructure | $6/sq ft | $10/sq ft | $18/sq ft | Reuse or rebuild framing |
| Fasteners and fascia | $2/sq ft | $4/sq ft | $7/sq ft | System and edge details |
| Removal and disposal | $2/sq ft | $5/sq ft | $10/sq ft | Existing deck condition |
Confirm whether the estimate includes hidden fasteners, fascia, delivery, waste, and disposal before comparing totals. Railing is often a separate allowance and can add roughly $40-$100 per linear foot, depending on material and design.
Board length, deck size, and framing change the estimate
Board dimensions and layout affect both the order quantity and labor. TimberTech decking is commonly sold in 12-, 16-, and 20-foot lengths; longer boards can reduce seams but may cost more and be harder to handle. A simple square deck usually wastes less material than one with angled edges, picture framing, or multiple cutouts.
Plan for about 5%-10% extra boards on a simple layout and 10%-15% for complex patterns. A deck over 30 inches above grade may need more involved stairs, guards, and structural work. Joist spacing also matters: if existing joists exceed the product’s installation requirements, corrections can add hundreds or thousands of dollars. Measure usable deck area and check framing before treating a per-square-foot quote as final.
Installation labor hours depend on layout and access
For a straightforward 300-square-foot replacement with usable framing, a small crew may need about 2-4 working days. A complete rebuild with stairs, railings, demolition, or elevated framing can take 1-2 weeks. Labor commonly represents around $12-$30 per square foot, but contractors may instead price by the project or crew day.
Hourly labor rates vary by market and trade, often falling around $50-$100 per worker-hour when billed directly. Stairs, curved edges, tight access, and detailed board patterns raise the hours even when the surface area is modest. Ask whether labor includes removal, framing corrections, and cleanup, not just laying deck boards.
Regional deck prices vary across U.S. markets
Urban markets and high-cost coastal areas may run about 10%-25% above a typical national quote because of labor, delivery, and permitting expenses. Rural markets can be 5%-15% lower, although remote delivery or limited contractor availability can erase the difference. Local supply can also affect the board price, particularly for a specific color or length.
These percentages are planning estimates, not fixed regional tariffs. Get at least two local bids using the same material list and scope. A low quote may reflect omitted railing, disposal, or structural work rather than a better price for the same job.
Three French White Oak project budgets compared
These examples show how project scope changes the final price. Totals are illustrative and assume standard U.S. labor, with no unusually difficult permitting or access.
| Project | Scope and labor | Estimated total | Approx. installed rate |
|---|---|---|---|
| 150-sq-ft surface refresh | Boards, fasteners, 20-30 hours; framing reused | $6,000-$9,000 | $40-$60/sq ft |
| 300-sq-ft deck replacement | New boards, fascia, removal, 50-80 hours | $13,500-$21,000 | $45-$70/sq ft |
| 400-sq-ft elevated rebuild | Framing, stairs, railing, 90-140 hours | $24,000-$38,000 | $60-$95/sq ft |
The elevated rebuild costs more per square foot because stairs, railing, and structural work add expense beyond the decking surface.
Delivery, demolition, and railing can add extra charges
Delivery may cost about $100-$400, depending on distance, load size, and whether a truck can reach the site. Removing an old deck commonly adds $2-$10 per square foot, with extra charges possible for concrete, difficult access, or heavy disposal. A permit and inspection may cost roughly $100-$500, but fees and requirements vary by municipality and project scope.
Railing, stair treads, lighting, and border details are frequent additions to a board-only estimate. Ask the contractor to list each allowance and identify which items are optional or required by local code.
How to lower the French White Oak deck price
Keeping the deck’s footprint and shape simple reduces offcuts and installation time. Reusing framing is reasonable only when it is structurally sound, correctly spaced, and compatible with the decking manufacturer’s instructions. Compare a repair or resurfacing quote with a full rebuild, but do not cover damaged or undersized joists to save money.
Choose standard board lengths where possible, limit decorative borders, and compare the same board grade, fastening method, fascia, and waste allowance across bids. Buying materials through the installer may also simplify delivery and reduce handling charges, but compare the material line item with local retail pricing. Controlling the layout and defining the scope usually saves more than trimming the board order too tightly.