TimberTech Weathered Teak decking typically costs about $14-$22 per sq. ft. for boards and $28-$50 per sq. ft. installed, depending on the deck, market, and framing condition. A 300-sq.-ft. deck commonly totals $8,400-$15,000 installed; board selection, labor, railing, and demolition drive the estimate.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Weathered Teak boards | $14/sq. ft. | $18/sq. ft. | $22/sq. ft. | Deck surface only |
| Installed decking | $28/sq. ft. | $38/sq. ft. | $50/sq. ft. | Typical accessible project |
| 300-sq.-ft. deck | $8,400 | $11,400 | $15,000 | Before unusual site work |
| Fascia and edge trim | $8/linear ft. | $14/linear ft. | $22/linear ft. | Material estimate |
What Weathered Teak boards cost for a typical deck
Weathered Teak is a color offered in TimberTech’s premium decking lineup; the precise product collection and board profile can affect availability and price. For planning, budget $14-$22 per sq. ft. for decking boards alone, or approximately $100-$160 for a 16-foot board, depending on width, profile, retailer, and local stock.
Installed pricing of $28-$50 per sq. ft. assumes a straightforward ground-level or modest-height deck with standard installation and sound framing. A 200-sq.-ft. surface may land around $5,600-$10,000, while 400 sq. ft. may cost $11,200-$20,000. Assumptions: U.S. standard labor rates, ordinary access, no major structural repairs, and decking-board replacement or new installation.
How boards, labor, and framing appear in the quote
A contractor’s estimate should separate decking from the work needed to install it. The example below uses a 300-sq.-ft. deck and typical midrange pricing; project totals change with waste, layout, and existing structure.
| Quote item | Low | Average | High | Pricing basis |
|---|---|---|---|---|
| Weathered Teak boards | $4,200 | $5,400 | $6,600 | $14-$22/sq. ft. |
| Labor and fastening | $2,100 | $3,300 | $4,500 | $7-$15/sq. ft. |
| Framing repairs | $0 | $900 | $2,100 | Inspection-dependent |
| Removal and disposal | $300 | $750 | $1,500 | $1-$5/sq. ft. |
| Fasteners, trim, delivery | $300 | $1,050 | $2,100 | Scope-dependent |
Framing repairs, demolition, and trim can add thousands beyond the price of the boards. Sales tax, permits, railing, stairs, and contractor overhead may be separate; ask whether each is included before comparing totals.
Board length, deck height, and layout change the estimate
Deck size is only one pricing variable. A simple rectangle generally uses material efficiently, while angled edges, picture-frame borders, stair treads, and many corners increase cutting time and waste. Contractors often allow roughly 5%-10% extra boards for a straightforward layout, with more needed for complex patterns.
Height and access can push labor beyond the basic per-square-foot rate. A deck under 2 feet high with open access is usually less demanding than one 8 feet or more above grade, where staging, stair work, or difficult material handling may add 10%-25%. If joists are spaced wider than the product’s installation requirements allow, framing changes may be necessary.
Board profile matters too. Square-shoulder boards, grooved boards, and hidden-fastener systems can have different prices and installation requirements. A quote should identify the exact collection, board width, edge profile, fastener system, and waste allowance rather than listing only “Weathered Teak.”
Where regional labor rates shift installed pricing
Labor and delivery can make the same decking package cost different amounts across the country. In lower-cost rural markets, straightforward installation may fall near the bottom of the installed range. Dense metro areas and high-cost coastal markets may run 15%-30% higher because of crew rates, parking, access, and disposal charges.
Compare local quotes for the same board and scope, not just the same deck area. Confirm whether the contractor is pricing TimberTech Advanced PVC or another TimberTech line in Weathered Teak, and whether the estimate includes taxes and delivery. Retail availability can also affect the material price when a color or profile must be ordered.
Labor hours and removal explain much of the price gap
For a 300-sq.-ft. uncomplicated deck, a small crew may need about 2-4 workdays for surface installation when framing is ready. Tear-out, stair construction, or repairs can extend the schedule. Labor commonly pencils out around $50-$100 per worker-hour, although contractors usually quote by scope rather than billing each hour separately.
Existing decking removal is a separate task, not automatically part of installation. Disposal may cost $1-$5 per sq. ft., and hidden rot can add labor and lumber after boards come off. Request a written allowance or unit rate for joist replacement so uncertain repairs do not become an unexplained change order.
Weathered Teak compares with lower-cost composite boards
Basic capped composite decking may cost roughly $7-$13 per sq. ft. for boards, while premium PVC options can run $14-$22 or more. Pressure-treated wood boards may be about $2-$5 per sq. ft. before installation, but require periodic cleaning, staining, or sealing and may not match the appearance or upkeep expectations of premium composite.
Compare lifecycle needs as well as the initial board price. A lower-cost substitute can reduce the materials bill, but changing product lines may alter color, texture, fasteners, warranty terms, and the finished look. If the existing deck frame is sound, resurfacing can avoid full structural replacement; a framing inspection is still important before choosing that route.
Three Weathered Teak project quotes by deck size
These planning examples use $14-$22 per sq. ft. for boards and $7-$15 per sq. ft. for installation labor, with modest allowances for fasteners and ordinary waste. They exclude major framing work, railing, and stairs.
| Project | Boards | Labor | Other allowance | Estimated total |
|---|---|---|---|---|
| 150 sq. ft., simple rectangle | $2,100-$3,300 | $1,050-$2,250 | $300-$900 | $3,450-$6,450 |
| 300 sq. ft., standard layout | $4,200-$6,600 | $2,100-$4,500 | $600-$1,800 | $6,900-$12,900 |
| 400 sq. ft., partial tear-out | $5,600-$8,800 | $2,800-$6,000 | $1,200-$3,000 | $9,600-$17,800 |
These examples are starting budgets, not fixed bids. A raised deck, stairs, railing, or concealed damage can raise the total substantially, so compare written estimates that list the same scope.
Which choices can lower the Weathered Teak bill
Keep the deck shape simple, limit decorative borders, and confirm board lengths that minimize offcuts. If the framing passes inspection, resurfacing instead of rebuilding may avoid unnecessary structural costs. Handle clearing and access preparation when practical, but leave demolition to the contractor if it affects safety or disposal requirements.
Get at least three itemized quotes using the same product specification. Ask about contractor-supplied material pricing, delivery, waste, fastening, and removal; then check whether a lower bid omits trim or repair allowances. Avoid paying for upgrades that do not solve a stated need, and verify current product availability before committing to a schedule.