A Titan spray gun typically costs $90-$300 for a standalone replacement, while premium guns and complete sprayer packages can cost more. The model, included tip and hose, compatibility with the sprayer, and whether the purchase is a replacement or a new setup drive the price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Standalone Titan spray gun | $90 | $190 | $350 | Gun only; model and seller affect price |
| Gun with tip or accessories | $120 | $240 | $425 | May include a guard, tip, or hose |
| Airless sprayer kit with gun | $350 | $900 | $2,500+ | Price depends on sprayer capacity and package |
| Replacement tip | $20 | $35 | $70 | Tip size and product line matter |
What a Titan replacement gun costs by type
Most buyers pay about $150-$250 for a new Titan airless spray gun sold separately. Entry-level or older-compatible guns may start near $90, while contractor-grade models, specialty configurations, or new packages can reach $300-$350. These figures refer to the gun, not a complete paint sprayer.
Prices vary by model and included parts. A basic replacement may arrive without a tip, so the final checkout total can rise after adding a compatible tip, guard, or hose. A complete sprayer package costs much more because it includes the pump, motor, and other equipment.
Budget roughly $190 for a standard standalone gun, then verify what parts the listing includes. Assumptions: U.S. retail pricing, standard airless equipment, before sales tax and shipping.
How the gun, tip, and hose shape the quote
For a standalone purchase, the largest cost is usually the gun body and trigger assembly. Accessories can add useful functionality, but bundled parts should be checked against the sprayer model and the material being applied.
| Quote component | Typical price | What changes the charge |
|---|---|---|
| Titan gun assembly | $90-$350 | Model, pressure rating, and seller |
| Airless spray tip | $20-$70 | Tip series, orifice size, and wear resistance |
| Tip guard or filter | $15-$55 | Compatibility and replacement frequency |
| Airless hose | $40-$150 | Length, diameter, and pressure rating |
| Shipping and tax | $10-$60+ | Seller, shipping speed, and local tax |
Compare package contents rather than judging a gun by its listed price alone. A $160 gun-only listing may cost more in total than a $210 bundle that includes a needed tip and guard. Assumptions: Common replacement parts; shipping varies by seller and distance.
Which Titan gun model fits the budget and sprayer
Titan’s RX-series guns are common replacement options, but names and included equipment differ across product generations and retailers. A standard contractor replacement often falls around $120-$230; upgraded or newer configurations may range from $200-$350. Confirm the precise model number before ordering, because a similar-looking gun may not match the hose, pressure rating, or intended sprayer.
Complete airless sprayers with a Titan gun included have a much wider price range. Smaller homeowner-oriented setups may cost $350-$800, midrange units commonly run $800-$1,500, and higher-capacity contractor packages can exceed $2,000. The gun is only one part of those totals.
Match the gun to the sprayer first, then compare the price of equivalent packages. Check the manual or product listing for pressure and connection compatibility rather than assuming every Titan gun fits every Titan machine.
Why tip size and pressure rating change the final price
Gun cost depends on the job as well as the brand. A standard gun intended for general architectural coatings tends to cost less than a specialty setup selected for heavier materials or demanding contractor use. If a listing includes a tip, the tip size should suit the coating and desired spray pattern; an included but unsuitable tip may still require another purchase.
Hose length can also affect a bundled quote. A 25-foot hose may be adequate for smaller work, while a 50-foot hose or longer run adds cost and can require attention to pressure and material delivery. For frequent daily use, buyers may prioritize a more durable assembly over the cheapest replacement.
Check the sprayer’s maximum pressure and the coating’s recommended tip before paying extra for a package. When comparing two guns, compare included filters, guard, tip, and warranty on the same basis.
Repair labor versus replacing a Titan spray gun
A professional diagnosis or repair commonly costs $75-$150 per hour, with a minimum service charge of about $75-$150 in many markets. A simple filter, seal, or trigger-related repair may total $100-$250 including parts and labor. More extensive repairs can approach the price of a new gun, especially when the body or major internal parts are damaged.
For example, one hour of bench work at $100-$150 per hour plus $20-$80 in parts produces an estimated $120-$230 repair bill. Service rates in large metro areas may run 10%-25% above smaller-market rates, and shipping equipment to a repair shop adds expense.
Get a repair estimate before approving work that costs more than half the price of a compatible replacement. A repair can make sense when the issue is limited to a replaceable component and the gun remains compatible with the sprayer.
When a complete sprayer package costs less overall
Replacing only the gun is usually economical when the existing sprayer works properly and the replacement is compatible. A complete package may be worth comparing when the pump is failing, the hose and gun also need replacement, or a new sprayer includes accessories that would otherwise be purchased separately.
For instance, buying a $180 gun, $90 hose, and $40 tip and guard set totals $310 before shipping and tax. A bundled package may include those parts, but buyers should confirm the sprayer itself is suitable for the job rather than choosing a larger machine just to get a lower accessory price.
Compare the cost of all needed replacement parts with the price of a complete, appropriately sized system. Avoid counting a bundled accessory as savings unless it is compatible and useful.
Ways to lower the Titan gun purchase price
First, identify the exact model and connection details from the sprayer manual or existing gun. This reduces the risk of paying return shipping or buying adapters. Compare at least three sellers using the same model number and check whether the stated price includes the tip, guard, and shipping.
Replacing a worn tip or filter rather than the whole gun can be the lower-cost fix when the gun body and trigger work correctly. For occasional use, a standard model may be sufficient; frequent professional use may justify paying more for durability and parts availability. Avoid buying a kit with a long hose or accessories that will not be used.
The most reliable savings come from buying the correct part once and limiting the purchase to the components the job needs. Include sales tax, delivery, and any repair diagnosis in the budget before comparing the final totals.