A Toro LS-922 log splitter typically costs about $250-$450 used, depending on condition, included accessories, and local demand. Because new LS-922 inventory may be limited, buyers should compare used listings with the price of a current electric splitter and verify the model’s condition before paying.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used Toro LS-922 | $150 | $325 | $500 | Working unit; age, wear, and location affect price |
| Refurbished or serviced unit | $300 | $425 | $550 | Price depends on documented repairs and seller support |
| Comparable new electric splitter | $400 | $600 | $800 | Current alternatives, not necessarily an LS-922 |
| Local pickup or delivery | $0 | $50 | $150 | Depends on distance and loading help |
What a used Toro LS-922 usually costs
For a functioning LS-922, a practical used-price target is roughly $250-$450. Units near $150-$250 may have cosmetic wear, limited proof of maintenance, or need minor attention. A clean, tested splitter with its stand, wedge, and operating parts intact may approach $400-$500, particularly where used equipment is scarce.
These are marketplace estimates, not a guaranteed current retail price. The LS-922 may not be readily available new, so an advertised price for a similar Toro or another brand should not be treated as the LS-922’s official price. Ask for the model plate and test the machine under load when possible.
Assumptions: U.S. private-party sale, working condition, ordinary wear, and local pickup.
Which parts of the LS-922 quote add to the bill
A private-party asking price may exclude repairs, transport, or missing accessories. A dealer or repair shop can charge more when the splitter has been inspected or serviced. The ranges below are planning estimates; repair costs vary with parts availability and the fault.
| Cost item | Typical price | What changes the charge |
|---|---|---|
| Used splitter | $150-$500 per unit | Condition, completeness, and local supply |
| Inspection or diagnosis | $50-$125 | Shop minimum and time spent testing |
| Minor repair | $75-$250 | Switch, wiring, fitting, or small-part replacement |
| Major hydraulic repair | $200-$600 | Seal, pump, cylinder, or parts availability |
| Delivery | $50-$150 | Travel distance and loading requirements |
Repair estimates are not additive by default; a diagnosis fee may be credited toward work, while major parts can exceed the listed range. Typical small-engine or equipment-shop labor: $75-$125 per hour, before parts.
How age, operation, and accessories shift the price
Condition is the biggest variable. A seller who demonstrates a smooth cycle and provides a recent service receipt can justify more than one selling an untested machine. Check for hydraulic-fluid leaks, damaged hoses, a bent or cracked frame, unusual motor noise, and a ram that stalls or retracts inconsistently.
Missing parts also reduce value. Confirm that the wedge, guards, controls, power cord, and any support stand shown in the listing are included. The exact equipment configuration should be checked against the model plate and manual rather than assumed from photographs of another Toro splitter.
Budget extra if the machine cannot be tested or has a suspected hydraulic fault. A low advertised price can become poor value if diagnosis, parts, and transport push the total above a tested unit’s price.
When does a similar splitter cost less than an LS-922
For occasional firewood preparation, a comparable electric splitter may be a better value if it is new, covered by a warranty, and readily serviceable. New electric models commonly fall around $400-$800, while used electric splitters may list for $150-$400 depending on capacity and condition. Compare rated splitting force, log length, power requirements, and warranty rather than relying on brand name alone.
A gas-powered splitter generally costs more and is designed for different workloads. If the work involves only a few manageable logs, a manual splitter or splitting maul can cost roughly $30-$150, but it requires more physical effort and takes longer. These options are not direct performance equivalents to a powered splitter.
How far can log diameter and wood hardness stretch capacity
Splitter ratings do not guarantee equal performance across all wood. Large rounds, knots, and dense hardwood can demand much more force than straight, dry softwood. Before purchase, confirm the LS-922’s rated capacity and maximum log dimensions from its label or manual; avoid relying on an unverified seller claim about tonnage or log length.
As a practical comparison, splitting straight softwood rounds under about 10 inches across is generally less demanding than working with knotty hardwood rounds of 12 inches or more. Those figures describe the workload difference, not a guaranteed LS-922 limit. Oversized pieces may need to be cut down first, adding chainsaw time and safety considerations.
What three realistic LS-922 purchase totals look like
The advertised price is only one part of the purchase total. These examples show how condition and transport can change the budget; they are estimates, not dealer quotes.
| Scenario | Unit price | Other expense | Estimated total |
|---|---|---|---|
| Tested private sale, pickup | $300 | $0 delivery | $300 |
| Clean unit, delivered locally | $400 | $75 delivery | $475 |
| Low-price unit needing shop work | $200 | $100 diagnosis plus $250 repair | $550 |
In the repair example, the diagnosis and repair allowances assume a modest fault. A failed major component or unavailable part could raise the total beyond $550, so obtain a repair estimate before buying a nonworking unit.
How regional supply changes used Toro asking prices
Prices can run roughly 10%-20% higher in areas with strong firewood demand or limited used-equipment supply. Rural sellers may offer lower asking prices but require longer pickup trips; dense metro markets can have more listings and higher delivery charges. These are broad budgeting adjustments, not fixed regional rates.
Season also matters. Listings often draw more attention before cold weather, when buyers prepare firewood, while spring and summer may bring more time to inspect equipment without immediate demand. Compare completed local sales where available, not just the highest active listing.
How to lower the LS-922 price without buying a repair
Ask the seller to demonstrate a complete cycle and inspect the splitter before negotiating. Request the model number, an honest account of repairs, and a clear list of included parts. A missing accessory or small cosmetic defect may support a modest discount; an untested hydraulic system calls for a larger risk allowance or a decision to walk away.
Compare the delivered total with a tested used alternative and a new splitter carrying a warranty. Keep a separate repair reserve of about $100-$250 for an older machine, but do not treat that amount as sufficient for a confirmed major hydraulic failure. A lower purchase price makes sense only when the final cost and expected workload remain acceptable.