A new Toro Z Master 6000 typically costs about $11,000-$16,000 before tax, with deck size, suspension, engine configuration, and dealer pricing affecting the quote. Used machines can cost considerably less, but hours, service history, and wear on the deck and hydro drive matter.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New Z Master 6000 | $11,000 | $13,500 | $16,000 | Typical dealer pricing by configuration |
| Used Z Master 6000 | $4,000 | $7,000 | $10,000 | Condition and operating hours vary |
| Delivery and setup | $0 | $150 | $400 | May be included in a dealer offer |
| Sales tax | Varies | About 5%-8% | About 10% | Depends on state and local rate |
Toro Z Master 6000 Price by Deck Size
For a new machine, a reasonable budget is $11,000-$14,000 for common 60-inch configurations and about $13,000-$16,000 for many 72-inch or higher-spec versions. Prices differ by model year, engine, suspension package, dealer inventory, and whether the quoted figure is list price or a current sale price.
Used examples often fall between $4,000 and $10,000. Lower-priced listings may have substantial hours or need tires, blades, belts, or hydraulic service; clean, late-model units can approach the price of a lower-cost new configuration. Assumptions: U.S. dealer or private-party pricing, standard commercial configuration, before tax and optional accessories.
Budget roughly $13,500 before tax for a typical new Z Master 6000, then verify the exact model number and included equipment.
What a 6000-Series Dealer Quote Includes
A quote may include the mower, pre-delivery inspection, assembly, and a limited warranty, but delivery, tax, and accessories are not always included. Request an itemized out-the-door price and confirm warranty length, engine coverage, and any required registration or service conditions.
| Quote item | Typical range | What changes the charge | Price check |
|---|---|---|---|
| Mower and deck | $11,000-$16,000 | Deck, engine, suspension, model year | Compare identical model numbers |
| Dealer setup | $0-$250 | Assembly and inspection policy | Ask if setup is included |
| Delivery | $50-$400 | Distance and access | Confirm delivery address |
| Accessories | $100-$1,000 | Mulch kit, lights, collection options | Price only needed items |
| Tax and fees | About 5%-10% of taxable price | Local tax and dealer charges | Request the final total |
Setup and delivery can shift the final bill by several hundred dollars even when the mower price is unchanged.
How Deck Width and MyRIDE Change the Quote
Deck size is a major price and productivity variable. A 60-inch deck may suit many large residential properties and smaller commercial routes, while a 72-inch deck can cover more ground on open acreage but may cost more and be harder to maneuver through narrow gates. Measure access points before paying for the wider option.
Suspension and engine choices also affect pricing. A MyRIDE suspension system, when offered on the specific configuration, can add several hundred dollars or more compared with a basic setup. Engine displacement, fuel type, and commercial-grade features should be checked against the exact model specification rather than assumed from the series name.
Compare the same deck width and suspension package across quotes; a different configuration can make a price comparison misleading.
Three Z Master 6000 Quotes for Different Buyers
A 60-inch standard configuration listed at $12,500, with $150 delivery and 7% tax, totals about $13,536. This example assumes no paid accessories and dealer setup included.
A 72-inch configuration priced at $14,500, plus $250 delivery and 7% tax, totals about $15,783. The wider deck may improve output on open ground but is not automatically the best value where gates or landscaping restrict access.
A used 60-inch mower priced at $7,000, with an estimated $600 for immediate maintenance and $150 transport, costs about $7,750 before tax. A mechanic’s inspection can identify worn spindles, leaks, or hydro-drive problems that could erase the savings.
Compare total ready-to-mow cost, not just the advertised mower price.
How Midwest and Coastal Dealer Prices Can Differ
Local inventory, freight, demand, and dealer competition can move quotes. As a planning estimate, rural or high-inventory markets may come in about 3%-8% below a tight-inventory metro market; high-demand coastal areas can run roughly 5%-12% above a lower-cost market. These are broad comparisons, not guaranteed regional price schedules.
Get at least two written quotes from nearby dealers and compare model numbers, freight, setup, included warranty, and sale terms. A low advertised price may exclude delivery or reflect a different model year. Out-of-area purchases can also add transport costs and complicate warranty service.
Local quotes are most useful when they cover the same configuration and the same final-sale items.
When Used Hours and Repairs Lower the Price
Used prices depend heavily on hours, maintenance records, storage, and wear. A mower with 1,000 or more hours is not automatically a poor buy, but it deserves closer inspection than a lightly used unit with documented servicing. Check the deck shell, blade spindles, belts, tires, control response, and hydraulic leaks before agreeing on a price.
Routine repairs can range from about $100-$300 for smaller service needs to $500-$1,500 or more when major components need work. Ask for a cold start and test the mower under load. Shop labor commonly runs about $90-$150 per hour, depending on location and repair shop.
Leave a repair reserve in the budget for used equipment unless a recent service record supports the asking price.
Cut the Z Master 6000 Price Without Sacrificing Fit
Choose the narrowest deck that can finish the intended acreage efficiently, and compare standard suspension with upgraded suspension using the actual price difference. Skip accessories that will not be used, but do not remove essential safety or maintenance items to make a quote look cheaper.
Ask dealers about prior-year inventory, seasonal promotions, and trade-in value. Compare cash and financed totals, including fees and interest, rather than judging by monthly payment alone. For a used unit, negotiate based on documented repair needs and get an inspection before purchase.
Keeping the configuration matched to the property is usually more effective than paying extra for features that do not improve the mowing job.