A Toto Drake II toilet typically costs $300-$700 before installation, while a standard replacement project often totals $600-$1,200. The final price depends on the exact model, local labor rates, removal of the old toilet, and whether the installation needs new parts or plumbing work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Drake II toilet | $300 | $450 | $700 | Fixture price; model and finish affect cost |
| Professional installation | $200 | $325 | $500 | Standard replacement labor |
| Removal and disposal | $50 | $100 | $175 | May be included in a bundled quote |
| Typical installed total | $600 | $850 | $1,200 | Assumes ordinary access and no major repairs |
What a Drake II toilet costs before installation
The Drake II is a two-piece, elongated toilet line with multiple configurations. A standard model commonly lists or sells for about $300-$500; versions with a different height, finish, bowl, or flushing configuration can reach $500-$700. Retail discounts and local stock can move the price in either direction.
For a straightforward replacement, budgeting about $850 installed is a useful starting point. That estimate assumes a standard white model, an existing toilet connection in good condition, and ordinary U.S. labor rates. Assumptions: standard residential bathroom, accessible shutoff valve, no floor or drain repairs.
How fixture, labor, and removal charges shape the quote
A quote may combine the toilet and installation into one price, so buyers should check whether the seat, supply line, wax ring, haul-away, and tax are included. The table separates common charges to make competing estimates easier to compare.
| Quote item | Materials | Labor | Delivery/Disposal | Typical charge |
|---|---|---|---|---|
| Drake II fixture | $300-$700 | $0 | $0-$75 | $300-$775 |
| Standard replacement | $20-$80 | $200-$450 | $50-$150 | $270-$680 |
| Minor connection or flange repair | $25-$150 | $75-$250 | $0-$50 | $100-$450 |
| Optional new seat or supply line | $15-$100 | $0-$50 | $0 | $15-$150 |
Ask for a written breakdown before approving work. A low installation price may exclude removal, while a higher package price may include the fixture and small supplies. A plumber charging $75-$150 per hour for 2-3 hours would bill about $150-$450 in labor, before any service minimum.
Which bowl, height, and plumbing conditions raise the price?
Model selection can shift the fixture price by several hundred dollars. A basic white configuration is generally less expensive than specialty finishes or less common combinations. Check the exact model number and included seat rather than comparing listings by the Drake II name alone.
Installation scope matters just as much. A standard replacement with a sound flange and a typical 12-inch rough-in often stays near the lower end. A 10- or 14-inch rough-in, an uneven floor, a corroded shutoff, or a damaged flange can require specialty parts or extra labor. Moving the drain or water line is a larger plumbing project and may add $300-$1,000 or more.
Nonstandard rough-ins and concealed damage are common reasons an estimate changes after removal. Request a quote that states what repairs are included and what would trigger an additional charge.
Where labor rates change across U.S. markets
Plumber rates and service minimums vary by location. Large coastal cities and high-cost metro areas may run roughly 15%-35% above a typical national estimate, while some smaller towns and rural markets may be 5%-20% below it. Travel distance, contractor availability, and local disposal fees also affect the bill.
Compare local installed quotes, not fixture prices alone. A low online toilet price may be offset by delivery, while a local plumber may offer a package that includes pickup and haul-away. Confirm whether sales tax and any visit or diagnostic fee are separate.
How long a plumber needs for a standard replacement
A simple swap commonly takes about 2-3 hours, including removal, setting the new toilet, connecting the supply, and testing for leaks. Difficult access or small repairs can extend the visit to 3-5 hours. Some contractors charge a flat project rate; others use an hourly rate plus a minimum charge, often equivalent to 1-2 hours.
Labor is usually cheaper when the existing flange, shutoff valve, and floor are ready for the new fixture. Ask whether the estimate includes a leak test and cleanup, and whether a second visit would incur another trip charge.
When removal, delivery, or repairs add to the bill
Hauling away an old toilet may cost $50-$150 if it is not included. Delivery can add $25-$75, particularly for a scheduled in-home delivery or a purchase from a distant supplier. Replacing a shutoff valve or flexible supply line may add $40-$150, depending on parts and access.
Unexpected subfloor damage can cost $150-$600 or more to address, while drain relocation is substantially more involved. These are not routine Drake II installation costs, so the quote should separate likely minor repairs from larger work that requires approval.
Clarify the price for each possible add-on before the old toilet is removed. This makes it easier to distinguish necessary plumbing repairs from optional upgrades.
Ways to lower a Drake II installation estimate
Compare at least two or three itemized quotes using the same model number and installation scope. Ask whether buying the toilet directly saves money or removes the contractor’s product warranty; also confirm who handles delivery and damaged-item returns. Bundling toilet replacement with another planned plumbing visit may reduce a separate service minimum.
Keep the existing drain location and choose a readily stocked finish to limit extra parts and delays. Do not pay for a higher-priced configuration unless its specific height, finish, or included feature matters. Before scheduling, clear the work area and verify the rough-in measurement, but leave plumbing disconnection and installation to a qualified professional.