Prices for the Toto Ultramax II toilet vary by model, installation type, and region. This article breaks down the typical cost, what drives the price, and practical ways to budget for a full install in the United States.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Toilet Unit (Standard Ultramax II) | $340 | $520 | $660 | Includes bowl and tank; elongated seat often extra |
| Installation Labor | $180 | $270 | $420 | Per toilet; varies by access and rough-in condition |
| Rough-In / Plumbing Modifications | $60 | $120 | $240 | If additional supply line or flange work is needed |
| Wax Ring & Flange Repair | $20 | $40 | $120 | Includes basic seal and potential flange costing |
| Delivery and Disposal | $15 | $40 | $120 | Removal of old unit and disposal fees |
| Permits (if required) | $0 | $50 | $300 | Depends on local code and inspection needs |
| Total Estimated Installed Price | $635 | $1,000 | $1,740 | Assumes standard 1.6 GPF Ultramax II, full install |
What buyers usually pay for the Toto Ultramax II and why
Typical total price for a standard 1.6 GPF Toto Ultramax II, including basic installation, falls in the $635–$1,000 range. Assumptions: standard elongated bowl, single-story bathroom, normal access, Midwest to Southeast labor markets, no major repairs. Regional labor rates and additional plumbing work push the high end higher. Per-unit price for the toilet itself generally sits around $340–$660 depending on finish and retailer.
Major cost components in a Toto Ultramax II quote
This breakdown helps buyers see how costs accumulate. Materials and labor together typically form the bulk of the price, with minor adds from permits or disposal.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Toilet Unit | $340 | $520 | $660 | Core product price |
| Labor | $180 | $270 | $420 | Installation, seal, fittings |
| Plumbing Mods | $60 | $120 | $240 | Rough-in, flange fixes |
| Wax Ring/Seal | $20 | $40 | $120 | Standard seal materials |
| Delivery/Removal | $15 | $40 | $120 | Logistics and haul-away |
| Permits | $0 | $50 | $300 | Local code requirements |
Which price drivers most move the final quote for Ultramax II?
Rough-in condition and region are the two largest variables. If the bathroom has tight access or a long run to the main waste stack, expect higher labor and potential flange work. Coastal regions with higher labor rates typically push the average price higher than rural Midwest markets. Additional drivers include seat finishes, quiet-close lids, and built-in bidet compatibility, which can add $50–$200 per unit.
Concrete ways to lower the Toto Ultramax II price without compromising quality
Control scope and timing to reduce costs. Choose standard finishes, reuse existing flange and wax seal when possible, and schedule during off-peak months for contractor availability. Compare two quotes to confirm that similar scopes are priced consistently, and bundle delivery with installation to minimize trips and handling charges. If replacement isn’t necessary, repairing the existing rough-in can save hundreds.
Regional price variations for Toto Ultramax II across the U.S.
Prices shift by market. Labor rates commonly differ by region, with the Northeast and West Coast tending to be higher than the South and Midwest. On the product side, retailers may offer promotions or bundled bathroom sets that impact the installed price in a given ZIP code.
System type and model variations that influence cost
Elongated bowls, dual-flush options, and soft-close seats fall into different price bands. Standard 1.6 GPF Ultramax II units typically cost less than premium finishes or integrated bidet seats. The right configuration balances reliability, water efficiency, and upfront price within the $340–$660 toilet unit range.
Labor scope matters: installer requirements and access
Difficulty of access or non-standard rough-ins can add 60–200% to labor hours. Most residential installs require 2–4 hours of skilled labor for a normal floor plan. Ensure the chosen contractor accounts for seal, wax ring, and secure mounting along with any necessary flange work.
How to read a Toto Ultramax II quote: common lines and expectations
Quotes typically separate toilet price, labor, and any mods. Ask for a line-item quote with per-unit pricing and a clear scope description. This helps compare apples to apples and avoids surprise charges at the end of the job.
Quick quotes: three real-world-style scenarios
- Single-story bathroom, standard access, Midwest region: Toilet $450; Labor $230; Mods $90; Total $770
- Remodel with flange repair, Coastal region: Toilet $500; Labor $320; Mods $180; Permits $0; Total $1,000
- New home rough-in, limited access, Northeast: Toilet $520; Labor $380; Delivery $40; Total $940
Warranty and service costs that affect long-term price
The Ultramax II typically carries a limited warranty on the porcelain and mechanical components. Extended warranty options or service plans can add $20–$60 annually but may reduce replacement risk later.