Trex deck board pricing varies by board profile, length, color, and installation specifics. This guide presents cost ranges in USD and highlights the main drivers behind the final bill for a typical residential deck project.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Material (board) | $2.50 | $5.50 | $9.00 | Per linear foot for boards only |
| Materials (fasteners, trim) | $0.50 | $2.00 | $4.50 | Hidden fasteners and fascia trim |
| Labor (installation) | $2.50 | $5.50 | $9.50 | Per sq ft installed |
| Delivery/Shipping | $0 | $1.50 | $3.00 | Distance-dependent |
| Permits/Inspections | $0 | $200 | $800 | Local requirements vary |
Assumptions: Midwest labor rates, standard 1x or 5/4 boards, typical residential deck scope, regional delivery, standard aluminum or hidden fasteners.
Trex Deck Board Price Ranges by Profile, Length, and Color
Typical total price for Trex deck boards includes material plus basic cutting and fitment. For a 300 sq ft deck using standard Trex boards, expect $3.75-$9.00 per sq ft for materials alone, depending on profile (Fiberglass? Actually Trex profiles like Transcend, Select, or Enhance) and color choice. Installed price commonly lands in the $9-$15 per sq ft range when labor, fasteners, and trims are included. These ranges reflect common regional differences and project scope such as edge details or stairs.
Cost Components That Shape Trex Board Quotes
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Boards (linear ft) | $2.50 | $5.50 | $9.00 | Depends on profile and color |
| Hidden fasteners | $1.50 | $3.00 | $6.00 | Plastic or composite options |
| Labor (installation) | $2.50 | $5.50 | $9.50 | Per sq ft installed |
| Edge trim / fascia | $0.50 | $1.50 | $3.50 | Per linear ft |
| Delivery | $0 | $1.50 | $3.00 | Distance-based |
| Permits | $0 | $200 | $800 | City or county requirements |
Variables That Most Influence Trex Board Pricing
Board profile and length are the top price drivers. Longer boards reduce waste but increase per-foot material costs. The choice between Transcend, Select, or Enhance lines changes price by approximately 30% to 70% per sq ft. Regional labor rates can swing installed costs by 10%–25%.
Regional Variations You Should Expect for Trex Deck Boards
Prices tend to be lower in regions with high competition and higher where transportation costs add up. For a 12×12 deck, material per sq ft may vary by region from $5.00 to $9.50, with installation pushing total per sq ft to $9.50-$15.50 in many markets. Consider local shipping and local code requirements when budgeting.
Per-Unit Examples to Ground Your Quote
Examples below illustrate real-world units you’ll see on quotes. A 6-inch-wide board may be priced at $4-$7 per linear ft for material, while a 12-foot board adds a small premium for handling. Hidden fasteners typically add $1-$2 per lineal ft. For a 300 sq ft deck using 12 ft boards, materials could run $2,400-$6,300 and installed costs $2,700-$4,800 depending on labor rates.
Labor Time and Crew Considerations for Trex Decks
Labor is usually estimated per square foot. A standard crew can install around 300-500 sq ft of Trex decking per week, depending on site access and complexity. Typical labor rates range from $4-$9 per sq ft installed, translating to total labor costs of $1,200-$4,500 for a 300 sq ft project.
Costs by System Type: Linear Foot vs. Square Foot Installations
Trex boards are priced per linear foot for material and per square foot installed when counting complete work. If a project uses 350 linear feet of boards and requires $2.75 per linear ft for materials plus $1.75 per linear ft for hidden fasteners and $5 per sq ft for installation, the math will balance differently than a per-sq-ft-only quote. This helps buyers compare bids on an apples-to-apples basis.
Additional Scenario: Stairs, Railings, and Fascia Impact
Including stairs, railing integration, and fascia trim can push the installed cost up by 15%–25% beyond a flat deck-only quote. Budget for extra fasteners and longer boards to accommodate transitions and edge finishes.
Practical Ways to Reduce Trex Board Costs Without Compromising Quality
Smart scoping and timing can trim the bottom line. Consider pairing with other exterior updates to share delivery and labor. Choose a standard color and profile to avoid premium options. If possible, schedule during shoulder seasons to reduce labor demand and secure better rates. Compare quotes from three contractors to verify price components and avoid unnecessary upgrades or extra features.