Prices for Trex fencing vary by board type, height, length, and installation conditions. This estimator shows typical cost ranges in USD and breaks down the main drivers behind price, from materials to labor and region. The phrase cost appears here to align with search intent and pricing focus.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Trex panel boards (per linear ft) | $15 | $20 | $28 | Includes grooves and hidden fasteners |
| Posts and cement (per post) | $40 | $70 | $110 | Concrete footing or sonotube required |
| Installation labor (per linear ft) | $12 | $20 | $32 | Average crew of 2-3 workers |
| Subtotal materials (per linear ft) | $25 | $40 | $60 | Assumes standard 6 ft panel height |
| Permits and inspections | $0 | $150 | $500 | Varies by city and HOA |
| Delivery | $0 | $100 | $350 | Depends on contractor policy |
Assumptions: Midwest or mixed regional labor rates, standard 6-foot Trex panels, typical residential lot access, no architectural constraints.
Trex fence material costs by rail type and board size
A Trex fence commonly uses composite boards in 6-foot or 8-foot lengths and rails sized for 2- or 3-rail configurations. Typical Trex board pricing ranges from $15 to $28 per lineal foot, depending on color, texture, and lineal length. For a standard 6-foot panel, expect about 6 feet of board material per panel, with hidden fasteners adding a small premium. The per-foot price often scales with profile (grooved vs solid) and whether tongue-and-groove edges are included in the design.
Material mix includes: Trex boards, compatible rails, stainless steel or high-grade aluminum fasteners, post caps, and joist hangers. Assumptions: standard 4×4 posts, sealed and capped for weather exposure.
Labor time and labor rates for Trex fence installation
Labor costs typically run $20 per linear foot on average, with a range from $12 to $32 per linear foot based on site access and crew size. A two- to three-person crew often completes simple runs faster, while tight spaces or complex layouts raise time requirements. Expect 0.8 to 1.2 hours per 6-foot panel installed, excluding site prep.
Formula: labor hours × hourly rate
Length, height, and lineal-foot cost breakdown
Fence length directly scales material and labor. A 60-foot run with a 6-foot height typically lands in the mid-range for installed price. A 100-foot stretch can push into the upper mid-range when gates, corners, and alignment add complexity. Target a budget of about $20-$40 per lineal foot for installed Trex fencing, with higher-end colors or textures adding 10%–20% premium.
Mini-sample: solid 60 ft, 6 ft high, standard color, no HOA hurdles.
Concrete and footing considerations
Post installation may require concrete footings or anchoring systems. Post costs commonly range $40-$110 per post, including materials, with labor contributing a large portion of the total depending on soil type and trenching needs. Assumptions: standard suburban yard, no exotic soils.
Common add-ons and their costs
Gates, hardware upgrades, and decorative rails influence the overall price. A single 4-foot gate often adds $400-$900, while two small gates can push toward $1,000. Finishing touches like post caps, stain-cosmetic sealing, and warranty extensions can add $50-$200 per section. Budget carefully for hardware upgrades and potential gate balancing work.
Delivery, staging, and disposal costs can add $100-$350 in typical projects.
Regional price variations across U.S. regions
Prices shift by market, especially between urban and rural areas. The Midwest and Southeast commonly sit near the average ranges, while coastal markets or high-cost regions show higher labor and material marks. Regionally, expect up to 15-25% higher installed prices in coastal cities versus inland zones.
When comparing quotes, ask for a region-adjusted breakdown and confirm whether delivery charges are included.
Permits, fees, and inspection costs
Some jurisdictions require a fence permit, resulting in permit fees that commonly range from $50 to $500, plus potential HOA review costs. Expect permit-related expenses to appear as a separate line item on most formal quotes.
Material substitutes and long-term value
Trex is a durable option with lower maintenance than wood, but some buyers consider PVC or aluminum alternatives for specific uses. Substitutes can shift prices by 5% to 25%, often driven by color stability, warranty terms, and post-life disposal. Weigh maintenance savings against higher upfront costs for premium materials.
Ways to cut Trex fence costs without sacrificing quality
Control scope by limiting height to 6 feet, reducing the number of corners, and standardizing gate sizes. Choose standard colors and avoid premium textures, plan for one cohesive fence line, and compare multiple quotes to lock in competitive labor rates. Consider bundling installation with adjacent fencing projects to reduce delivery and mobilization costs.
Estimates shown are typical ranges for standard residential installations in the United States. Prices will vary by region, site conditions, and contractor. A formal quote will include a materials list, labor plan, and any needed permits.