Homeowners typically pay a range for Trex fencing per linear foot, with material costs plus installation labor driving the total. This guide covers typical price ranges, factors that shift pricing, and concrete per-foot figures to help budget accurately.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Material cost per linear ft | $12 | $18 | $28 | Composite boards, rails, posts, caps |
| Installation cost per linear ft | $10 | $22 | $32 | Fence height, terrain, prep work |
| Total installed cost per linear ft | $22 | $40 | $60 | Typical residential scope |
Assumptions: Midwest labor rates, standard 6-foot privacy panels, normal yard access, no gate accessories beyond standard hinges.
Trex Fencing Per Linear Foot: Typical Installed Price Range
Most U.S. installations fall in the $25-$60 per linear foot range when including both materials and labor. The wide spread accounts for height (6 ft vs 4 ft), panel style, and local labor rates. For a standard 6-foot privacy fence using Trex Select or Trex Transcend, expect closer to the mid-range rather than the high end, provided the site is accessible.
Material Breakdown: Boards, Rails, Posts, and Caps
Material costs typically range from $12-$28 per linear foot for Trex fencing components. A common mix uses hollow composite boards around $16-$22 per ft and aluminum or wood posts around $3-$6 per ft-equivalent. The table below shows a compact view of material segments.
| Material | Low | Average | High | Notes |
|---|---|---|---|---|
| Deck boards (horizontal) | $7 | $12 | $20 | Trex line varies by grade |
| Posts and rails | $3 | $5 | $8 | Typically 4×4 or 6×6 posts |
| Caps, hardware | $2 | $4 | $6 | Includes caps and fasteners |
Labor Costs: Typical Crew Time and Rates
Labor costs commonly run $10-$22 per linear foot for standard installation, with higher rates in urban areas or complex layouts. A straightforward 100-foot run may take a two-person crew roughly 1-2 days, depending on soil, grading, and gate work. Complex installs can push labor toward the high end.
Regional Variations That Move the Price Dial
Regional price differences often amount to a 15% to 25% delta between markets like the Southeast, Midwest, and West Coast. Urban markets with tighter schedules and higher labor pools tend toward the upper end of the range, while rural areas lean toward the lower end.
Impact of Fence Height, Style, and System Type
Switching from a 4-foot to a 6-foot panel adds roughly $6-$12 per linear foot in material and similar lift in labor if demolition or additional posts are required. A privacy panel with no lattice or decorative accent stays near the lower end of the price band; adding decorative elements increases both material and labor costs.
Gates, Hardware, and Accessory Add-Ons
Installing a standard gate typically adds $150-$450 per gate beyond per-foot fencing when including hardware and alignment. Wider gates or automatic openers can push the price higher, sometimes by 20-40% for premium hardware.
Site Prep and Access: How Terrain Changes the Quote
Rough terrain, slopes, or concrete driveways require additional prep work. Expect $2-$6 per linear foot for trenching, grading, or base adjustments when necessary. Poor access can double crew time in some neighborhoods.
Warranty, Quality Grade, and Long-Term Value
Trex fences carry multi-component warranties that influence price. Higher-grade materials and extended warranties add $2-$6 per linear foot on average, but can reduce replacement costs over time by avoiding premature wear or staining.
Regional Cost Comparisons: Quick Snapshot by Zone
Table below compares average installed per-foot pricing by broad regions. The ranges reflect typical residential projects with standard posts and no oversized gates.
| Region | Low | Average | High | Notes |
|---|---|---|---|---|
| Northeast | $28 | $42 | $58 | Higher labor and permitting |
| Southeast | $24 | $40 | $58 | Seasonal demand fluctuations |
| Midwest | $22 | $38 | $56 | Generally competitive labor |
| West | $26 | $44 | $60 | Higher material costs in some markets |
How Many Linear Feet You’ll Need to Budget
Estimate by perimeter length plus any gates. A typical 100-130 linear feet yard might fall into the $2,800-$6,500 installed range depending on height, style, and site access. Use a per-foot quote alongside a boundary measurement for accuracy.
Cost-Saving Tactics: How to Lower the Trex Fence Price
Scope control and material choice are the main levers. Choose fewer decorative components, plan for mid-range boards, and pair with standard hardware. Scheduling installations in off-peak seasons can yield 5-15% savings on labor, while bundling with adjacent outdoor projects may unlock discounts.