Homeowners often ask for the Trex price per linear foot to plan budgets for a new or replacement deck. The total cost hinges on board width, series, color, and installation scope. This article breaks down typical price ranges in USD, explains what drives each cost, and shows practical ways to estimate and control the final bill.
Assumptions: Midwest to South installation, standard 5/4 boards, mid-range Trex line, single-story deck, basic railing, and standard fastening hardware.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Trex decking boards (per linear foot) | $5.00 | $7.50 | $10.50 | Width and series vary |
| Labor for installation (per linear foot) | $3.00 | $5.50 | $9.50 | Includes basic framing prep |
| Fasteners and hidden clips (per linear foot) | $0.50 | $1.25 | $2.00 | Color-matched options raise cost |
| Substructure materials (per square foot, amortized) | $2.50 | $4.00 | $6.00 | Includes joists, decking supports |
| Sealing/maintenance and trimming waste (per linear foot) | $0.25 | $0.75 | $1.50 | Optional maintenance set |
Trex Decking Price Per Linear Foot by Series and Color
Trex price per linear foot varies by the decking series and color choice. Entry-level boards typically cost less, while premium lines and textured finishes push the range higher. Typical total price for a 300 linear foot run ranges from $2,700 to $4,800, depending on board width and color, with mid-tier options around $3,600-$4,000. Per-linear-foot estimates help compare quotes quickly and align expectations with real-world install conditions.
Materials and Labor Split in a Typical Trex Project
The quote usually separates materials, labor, and accessories. A common breakdown for 250-350 linear feet is:
- Materials: Trex boards, hidden fasteners, cap rails if used
- Labor: Framing check, deck board layout, fastener installation, edge trimming
- Accessories: Railing components, posts, post caps, and stairs
Assumptions: standard 6- to 8-foot-wide deck, level site, one or two stairs, average access, and standard railing configuration.
Regional Variations in Trex Price Per Linear Foot Across U.S. Regions
Regional cost differences can shift the final total by 10–25%. For example, the Pacific Northwest and Northeast often have higher installation labor rates than the Southwest or Southeast due to demand and permitting. A 200–300 linear foot project may show a $400–$900 spread between high- and low-cost regions for total installed price.
Composite Decking System Type and Board Width Affecting Price
Board width and system type influence per-linear-foot cost. Standard 5/4 boards (1 inch thick) are cheaper than 2x decking options or radiused edges. A 2x option can add roughly $1–$2 per linear foot material cost, while hidden clip systems may add $0.50–$1.50 per foot in hardware. Per-square-foot calculations should reflect these board and system choices.
Labor Rates and Installation Time for Trex Decking
Labor costs vary with crew size and local wages. A typical crew of two workers bills at $50–$85 per hour in many regions. For a 300-linear-foot install, labor might represent 45–60% of total project cost. Schedule considerations impact rates if work requires weekends or weather-related delays.
Add-ons That Drive Trex Price Per Linear Foot Higher
Railing upgrades, stairs, lighting, and skim coating add to the base price. A basic railing with posts and caps can add $20–$60 per linear foot spread across the deck run, while premium LED lighting may push per-foot costs another $1–$3. Budget room for delivery of materials and disposal of old decking if replacing.
Ways to Lower Trex Price Per Linear Foot Without Sacrificing Quality
Control scope and timing to reduce costs. Consider fewer boards, simpler railing designs, or eliminating premium colors. If budget is tight, replacing degraded framing rather than full deck removal can reduce waste. Bundling materials and opting for standard lengths may also lower labor time and delivery charges.
How a Typical Quote Breaks Down: Role A Perspective
Buyers usually pay for the exact keyword in three broad chunks: decking materials, installation labor, and hardware/fasteners. A mid-range project often lands around $7.00–$9.50 per linear foot for materials, plus $4.00–$6.50 per foot for labor, with hardware and waste adding another $0.75–$2 per foot. The total sits in the $11–$16 per linear foot range for mid-sized projects in typical market conditions.
Concrete Example: 350 Linear Feet, Mid-Tier Setup
A typical mid-tier Trex deck for 350 linear feet might list as follows: materials $2,800–$3,300, labor $1,400–$2,100, hardware and delivery $350–$700. Total estimate $4,550–$6,100, with variations by region and color finish.
Role B: Quote Components, Concrete Cost Areas
Below is a compact breakdown showing how a quote might be structured for a Trex deck project. The table helps readers compare bids and understand where costs cluster.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (Trex boards, caps, rails) | $2.50 | $4.50 | $7.00 | Series and color dependent |
| Labor | $1.50 | $3.90 | $6.50 | Crew size and site access drive variance |
| Hardware (clips, screws, fasteners) | $0.30 | $0.90 | $1.70 | Hidden clips add cost |
| Delivery/Disposal | $0.20 | $0.60 | $1.00 | Distance and haul requirements |
| Permits/Inspections | $0 | $0.40 | $1.20 | Region dependent |
| Warranty/Overhead | $0.10 | $0.50 | $1.00 |
Role C: Variables That Most Change the Final Trex Quote
Two key drivers shape the final price: deck size and board width. A 12×14 deck with standard 5/4 boards costs less per linear foot than a smaller 8×10 with premium boards due to fixed labor and permitting; however, larger projects may secure some economies of scale on materials. Assumptions: standard access, typical soil, and normal permit requirements.
A second driver is railing and staircase complexity. A straight run without stairs costs less than a deck with two flights of stairs and interpretive railing. Expect a $2–$6 per linear foot swing in total when upgrading rails, posts, and lighting features.
Role D: Practical Ways to Reduce the Trex Price Per Linear Foot
Control scope to keep costs predictable. Choose standard colors, avoid specialty edge details, and limit custom railing shapes. Aim for a single-season install window to avoid surge pricing. Compare quotes from at least three installers and request itemized line items to spot big jumps in hardware or labor.