A used Maytag washer typically costs $150-$500, with many working top-load models priced near $300 and newer or refurbished front-loaders costing more. Age, condition, model type, seller warranty, delivery distance, and installation needs make the largest difference to the final price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used Maytag washer | $100 | $300 | $700 | As-is older unit to newer, tested or refurbished model |
| Delivery | $0 | $60 | $150 | Pickup may be free; stairs or long distance can add charges |
| Hoses and hookup | $15 | $45 | $100 | Depends on hose quality and installation scope |
| Possible first repair | $0 | $125 | $350 | Inspection may reveal a minor part or a larger fault |
Used Maytag washer prices by age and condition
Private sellers commonly ask $100-$350 for an older washer that runs, while appliance resellers often charge $250-$550 for a tested unit. A refurbished Maytag with replaced parts and a limited warranty may reach $400-$700, especially if it is a newer high-efficiency model or a sought-after top-loader.
A practical budget for a dependable, basic used unit is about $250-$450 before delivery. Prices assume a standard residential washer, no major repair, and ordinary access. Local demand and the exact model can push a quote outside these ranges.
Assumptions: U.S. resale pricing, standard 27-inch washer, working condition, no unusual access or plumbing work.
What a Maytag washer quote includes for parts and labor
A listing price may cover only the appliance. Retailers may include testing or a short warranty, but delivery, old-unit removal, hoses, and hookup can appear as separate charges. Ask for an itemized total and confirm whether the washer has been tested through a full wash and spin cycle.
| Quote item | Typical range | What changes the charge |
|---|---|---|
| Washer purchase | $100-$700 per unit | Age, model, condition, seller warranty |
| Delivery | $40-$150 per trip | Distance, stairs, narrow access |
| Installation labor | $50-$125 per hour | Hose replacement, leveling, hookup complexity |
| Hoses or small parts | $15-$100 per set or repair | Part type and whether existing parts can be reused |
| Old washer removal | $0-$75 per unit | Retailer policy and disposal requirements |
Delivery and setup can add $50-$250 to the appliance price when they are not bundled. A straightforward hookup may take under an hour; stairs, tight doorways, or a missing drain connection can increase labor or require separate plumbing work.
How model type, age, and repair history shift the price
Top-load models are often cheaper to buy and repair than comparable front-load washers, though condition matters more than style alone. A basic older unit with cosmetic wear may sell below $200; a newer high-efficiency model with a clean tub, quiet spin, and documented testing can command several hundred dollars.
Age is not a complete measure of value. A washer that has sat unused may have dried seals or hidden drainage issues, while a regularly used machine with service records may be a safer purchase. Ask for the model number and compare replacement-part availability before paying a premium.
Repair history can matter more than a small difference in age. A documented drain-pump replacement may be reassuring, but repeated leaks, loud bearings, or control-board faults are reasons to reduce the offer or walk away. A basic service call commonly costs $75-$150, before parts.
Control delivery and setup charges before agreeing to buy
Confirm whether the quoted delivery includes carrying the washer inside, removing packaging, leveling the feet, connecting water lines, and testing for leaks. A curbside drop-off can cost less than in-home placement, but may leave the buyer to move a heavy appliance and manage installation.
Removal of the old machine can add $25-$75, although some sellers or retailers include it with delivery. Stairs, long carries, or a distance beyond the seller’s normal service area may add $20-$75 or more. Get delivery, hookup, and haul-away charges in writing before comparing offers.
Refurbished Maytag washers versus as-is listings
An as-is washer can cost $100-$250 and may suit a buyer who can inspect it, transport it, and handle repairs. A tested reseller unit usually costs more, often $250-$550, but may include cleaning, basic testing, or a 30- to 90-day limited warranty. Refurbished does not always mean every wear part has been replaced, so ask what work was performed.
For a machine priced at $150, a $125 service call plus parts can erase the savings. Compare the total purchase, delivery, and likely repair expense with a tested unit, and confirm the seller’s return policy. A low sticker price is less useful if the washer cannot be returned after a failed test.
Regional resale prices and delivery distance change the total
Used-appliance prices tend to be higher in dense metro areas where demand is strong and delivery is convenient; rural listings may be cheaper but require a longer drive or paid transport. As a planning estimate, metro asking prices can run 10%-25% above smaller-market prices, while rural delivery may add $50-$150 when a seller travels farther.
These are broad market differences, not guaranteed regional rates. Local supply, season, and the number of nearby appliance resellers can matter more than state lines. Compare at least three listings with similar model type and condition, using the delivered price rather than the advertised price.
Lower the used Maytag price without skipping key checks
Ask for the model number, approximate purchase age, repair receipts, and a video of the washer filling, draining, and spinning. Inspect the tub, door seal, hoses, and floor beneath the machine for rust, residue, or signs of leaks. Test each cycle when possible, and avoid paying extra for cosmetic features that do not affect operation.
Pickup can save delivery fees if a suitable vehicle, helper, and safe loading method are available. However, confirm that the washer will fit through doorways and that its dimensions match the laundry space. Price a hose set and installation before committing if the current connections are old or incompatible.
Set a maximum all-in budget, not just a purchase-price limit. For example, a $275 washer plus $80 delivery and $40 in hoses totals $395; a $350 tested unit with delivery included may be the better value. Keep a repair reserve if buying without a warranty.