A Victoria Arduino Eagle One typically costs about $18,000-$22,000 for a two-group commercial machine, while the one-group Eagle One Prima is generally around $6,500-$8,000. Final pricing depends on model, group count, electrical configuration, shipping, installation, water treatment, and whether the quote includes tax or service.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Eagle One Prima | $6,500 | $7,250 | $8,000 | One group; price depends on finish and seller. |
| Eagle One two-group | $18,000 | $20,000 | $22,000 | Commercial machine, before some site and service charges. |
| Eagle One three-group | $23,000 | $25,000 | $28,000 | Higher capacity; configuration and availability affect quotes. |
| Typical installed two-group project | $20,000 | $23,000 | $28,000 | May include delivery, water treatment, setup, and electrical work. |
Assumptions: U.S. dealer pricing for new equipment, standard finishes, and ordinary commercial access. Local tax, freight, and building upgrades may be additional.
How much does a Victoria Arduino Eagle One cost?
Budget roughly $18,000-$22,000 for a new two-group Eagle One machine alone. A one-group Prima, a separate model aimed at smaller-volume service, usually falls near $6,500-$8,000. A three-group commercial configuration commonly runs $23,000-$28,000, depending on dealer quote, finish, and supply.
Those are practical U.S. budget ranges rather than fixed manufacturer prices. Dealers may quote equipment at a negotiated price, and packages can bundle grinders, water filtration, installation, or training. A low equipment quote may exclude freight, plumbing, electrical work, and local sales tax.
For planning, a standard two-group purchase with typical setup often lands around $20,000-$28,000 before tax. A cafe opening from an unfinished space may spend more if it needs a dedicated circuit, drain work, counter changes, or other site preparation. A replacement in a ready-to-use bar can cost less to install.
Price basis: machine purchase excludes major building alterations; installed totals include common setup items but not a full cafe build-out.
What goes into an Eagle One machine quote?
The machine is usually the largest line item, but delivery, water preparation, and commissioning can add several thousand dollars. Ask the dealer to identify what is included rather than comparing only the headline equipment price.
| Quote item | Low | Average | High | Typical scope |
|---|---|---|---|---|
| Machine | $18,000 | $20,000 | $22,000 | New two-group Eagle One, standard configuration. |
| Labor and commissioning | $500 | $1,000 | $2,000 | Placement, connections, startup, and basic checks. |
| Water filtration | $300 | $700 | $1,500 | Filter and treatment sized for local water conditions. |
| Freight and delivery | $250 | $600 | $1,200 | Freight class, distance, liftgate, and inside delivery matter. |
| Electrical or plumbing changes | $0 | $800 | $3,000+ | Existing service may be ready; upgrades are site-specific. |
| Tax and fees | $0 | $1,200 | $2,500+ | Varies by jurisdiction and taxable items. |
Installation labor is commonly billed as a project charge or at roughly $75-$150 per hour, with travel or minimum service charges possible. A straightforward placement and startup may take 3-6 hours; complicated connections can require more time or separate trades.
Water treatment is not an optional cosmetic extra. Hardness and mineral content influence scale formation and machine reliability, so the appropriate filter depends on a water test and the manufacturer’s specifications. A quote should state the filter model, replacement cartridge price, and expected service interval.
Potential additional charges include removal of an old machine, disposal, after-hours delivery, stairs, or a long carry from the loading area. Removal and disposal can add about $100-$500, while difficult access or special delivery may add several hundred dollars. Confirm these terms before scheduling.
How group count, voltage, and finish change the price
Group count is the clearest price divider: the Prima, two-group, and three-group machines serve different service volumes and have different purchase budgets. A two-group model is a common cafe choice, while the three-group option adds capacity and a higher upfront cost. The Prima has one group and should not be treated as a discounted two-group machine.
Electrical requirements must match the exact machine configuration and the location’s available service. Commercial models may require a dedicated circuit and, depending on configuration, a different voltage or amperage than a small appliance. Before ordering, have the dealer provide the machine’s electrical specifications and have an electrician confirm the panel and connection. Electrical upgrades can add $500-$3,000 or more.
Finish, available configuration, and dealer inventory can also affect the quote. Standard finishes may be easiest to source; a less common color or configuration can change lead time or price. Ask whether the quoted unit is new, what accessories are included, and whether the warranty starts at shipment or installation.
Capacity should be matched to expected simultaneous drink demand, not just daily sales. A single group may be adequate for low-volume service or a compact operation, but multiple staff preparing drinks at peak times can benefit from two groups. A three-group machine is a larger investment that only makes sense when workflow and counter space support the additional capacity.
Ask for the exact model name and configuration in writing. Dealers may use “Eagle One” broadly while quoting different group counts or the separate Prima model. Comparing like-for-like models prevents an apparently low quote from masking a smaller machine or a package with fewer included services.
How long does Eagle One delivery and installation take?
Allow several hours for ordinary installation and plan for a longer lead time if the machine is not in local inventory. A ready site with the correct counter opening, drainage, water line, and electrical supply can often be commissioned in one visit. Work involving an electrician, plumber, or counter modification can take multiple visits.
For a standard setup, installation and commissioning may take 3-6 labor hours. At $75-$150 per hour, that represents roughly $225-$900 in labor before travel charges or minimums; dealer packages may instead set a flat fee around $500-$2,000. These are budgeting ranges, not guaranteed service rates.
Delivery timing varies with the dealer’s stock, configuration, and freight schedule. An in-stock unit may be arranged within days or a few weeks, while a special configuration or backorder may take several weeks or longer. Confirm the expected ship date and cancellation terms before coordinating opening-day work.
Prepare the site before delivery. Verify doorway and counter access, confirm the machine’s footprint and weight with the dealer, and have power, water, drainage, and filtration ready. A failed delivery or a second commissioning visit can add labor and freight charges even though the machine price remains unchanged.
How do Eagle One prices vary across U.S. markets?
Regional differences usually affect installation and delivery more than the machine’s base price. A major metro with multiple authorized service providers may have more competitive installation quotes, but higher labor rates. Rural locations can face added travel, freight, or limited technician availability.
For planning, service and installation charges in high-cost metro areas may run about 10%-25% above a national-middle estimate. Rural or remote delivery can be 10%-30% higher when freight, travel, or a second visit is needed. These are directional ranges, not guaranteed regional price lists; dealer promotions and inventory can outweigh location effects.
Sales tax is a separate local expense and may apply to equipment, delivery, or installation depending on state and local rules. On a $20,000 machine, a combined tax rate of 6%-10% would add about $1,200-$2,000 if the full equipment amount is taxable. Verify the dealer’s tax calculation and whether delivery is included in the taxable total.
Compare quotes from dealers serving the same area and request the same configuration, delivery method, warranty, and startup services. A low machine price may be offset by freight or travel fees. A local dealer’s higher equipment quote could still result in a lower total if it includes commissioning and prompt warranty service.
Could an Eagle One Prima or used machine cost less?
The Prima lowers the entry price, while a used commercial Eagle One can reduce upfront spending but adds condition and support risk. A Prima generally costs $6,500-$8,000 new, making it a different budget option from the $18,000-$22,000 two-group model. Its one-group format is not a direct capacity substitute for a busy cafe’s two-group machine.
Used prices vary widely with age, hours, maintenance records, seller, and included accessories. A working used unit might be listed around $9,000-$16,000 for a two-group configuration, but buyers should treat this as a broad market estimate, not a dependable fixed range. Refurbishment, freight, and repairs may erase much of the savings.
Before buying used, request service records, inspect for leaks and scale damage, test heating and group operation, and confirm that parts and authorized service are available. Budget roughly $500-$2,500 for inspection, immediate maintenance, or minor repairs; a major boiler, pump, or control repair can cost more. Confirm whether any remaining warranty transfers.
A lower-cost alternative may involve choosing a different commercial machine rather than forcing a home-oriented model into high-volume service. Compare boiler capacity, workflow, service access, and expected daily demand along with purchase price. A less expensive machine is only a saving if its output and support fit the operation.
Which Eagle One quote details can be trimmed?
Keep the chosen group count and required performance fixed, then compare removable package items and site-preparation costs. Request an itemized quote for the machine, freight, water system, commissioning, accessories, and tax. This makes it easier to identify whether a dealer bundle includes equipment the buyer already owns.
Choose a standard finish and in-stock configuration when appearance or customization is not essential. Ask whether a different delivery date or consolidated freight reduces charges. Avoid rush delivery if the opening schedule allows normal freight, since expedited handling can add several hundred dollars or more.
Prepare the counter, electrical supply, plumbing, and access before the installer arrives. Having a qualified electrician or plumber complete necessary work in advance may reduce technician waiting time and repeat visits. Do not bypass water treatment or required electrical work to save money; those shortcuts can increase repair risk or delay startup.
Compare at least two written quotes with the same model, warranty, freight terms, installation scope, and water-treatment specification. A difference of $1,000 is meaningful only after confirming that one quote has not omitted startup, disposal, or delivery. Negotiate package scope rather than assuming every accessory or service is necessary.
For an existing machine, obtain a repair estimate before replacing it. A diagnosis and repair may cost around $150-$300 before parts, while common repairs can range from a few hundred dollars to over $1,500 depending on the fault. Replacement is easier to justify when repairs are recurring, parts are unavailable, or the existing machine cannot meet service demand.
Budget check: use the machine quote plus delivery, setup, water treatment, electrical or plumbing work, and applicable tax. Keep a 5%-10% contingency for unknown site expenses, especially in older commercial spaces.