A Viking double oven typically costs about $10,000-$16,000 for a built-in wall-oven unit, while a 48-inch Viking range with two ovens commonly runs $15,000-$25,000 before installation. The final price depends on whether the buyer wants a wall oven or range, the model and fuel setup, local dealer pricing, and the electrical, gas, and cabinet work required.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Viking built-in double wall oven | $10,000 | $13,000 | $16,000 | Appliance only; model, finish, and availability affect price |
| Viking range with two ovens | $15,000 | $20,000 | $25,000 | Typically a 48-inch professional-style range |
| Wall-oven installation | $500 | $1,200 | $3,000+ | More if wiring or cabinetry needs modification |
| Range delivery and installation | $300 | $800 | $1,800+ | Fuel connection, access, and old-appliance removal change the bill |
| Installed project total | $10,800 | $14,500 | $28,000+ | Excludes sales tax and major kitchen remodeling |
What a Viking Double Oven Typically Costs
Plan on roughly $10,000-$16,000 for the oven itself if the purchase is a built-in double wall oven. That range reflects premium residential equipment sold through appliance dealers; an advertised price may differ from the final local quote because of model availability, finish, delivery, and promotions. A 48-inch Viking range with two oven cavities is a different product and generally costs more, with appliance prices often around $15,000-$25,000.
These estimates are for the appliance before tax and installation. They assume a standard-size residential kitchen, a new unit in the same general location as the old one, and no extensive cabinet reconstruction. A high-end finish, special order, difficult delivery, or an upgraded electrical or gas connection can push the full project above the listed ranges.
For a wall oven, price comparisons should use the exact model number and cabinet dimensions. For a range, compare width, cooktop configuration, fuel type, and oven capacity; the second oven is part of the range package rather than a separate wall unit. Assumptions: U.S. dealer pricing, standard installation conditions, and no major kitchen renovation.
How Oven, Cabinet, and Connection Charges Shape a Quote
A dealer quote can combine the appliance, delivery, installation labor, haul-away, and any required trade work. Ask whether each charge is included, especially when a wall oven needs a cabinet opening altered or a range requires a new gas line. Quotes may show installation as a single package, so requesting a written itemization makes competing bids easier to compare.
| Quote component | Typical price | What can change it | Common unit |
|---|---|---|---|
| Viking double wall oven | $10,000-$16,000 | Model, finish, dealer stock | Per appliance |
| Viking double-oven range | $15,000-$25,000 | 48-inch width, fuel, cooktop layout | Per range |
| Installation labor | $500-$1,500 | Access, connections, crew requirements | Per job |
| Cabinet modification | $300-$2,000 | Opening size, trim, finish repair | Per opening |
| Electrical or gas work | $150-$1,500 | New circuit, outlet, shutoff, or line | Per task |
| Delivery and old-unit removal | $150-$600 | Stairs, distance, disposal rules | Per delivery |
Appliance price is usually the largest line item, but site work can add hundreds or several thousand dollars. Installation labor for a straightforward swap may take 2-4 hours; a complex built-in replacement can require a carpenter and electrician in addition to the appliance crew. A practical labor estimate is 2-4 workers for 2-6 hours at about $75-$150 per worker-hour, depending on trade and market.
The table gives planning ranges, not fixed Viking fees. Delivery, installation, and haul-away may be bundled, while cabinet work, new wiring, or gas plumbing often comes from a separate contractor. Confirm tax, disposal, and any service-call charge before accepting the estimate.
Which Width, Fuel, and Cabinet Opening Changes the Price?
Product type and kitchen fit are the biggest price variables. A double wall oven sits in cabinetry and usually needs a properly sized vertical opening; a 48-inch range occupies floor space and includes a cooking surface as well as two ovens. The range may require a wider path through doorways and more labor to position, even if the existing kitchen already has a suitable range location.
Width and capacity matter. A 30-inch wall oven is a common replacement size, but the appliance’s exact cutout dimensions must match the cabinet. If the opening needs to be enlarged or rebuilt, carpentry and finish work can add about $300-$2,000. A 48-inch range is substantially wider than a typical 30-inch range; replacing a smaller unit may require counter, backsplash, or cabinet changes that can add $1,000-$5,000 or more.
Fuel and connections also affect the quote. A unit requiring a dedicated 240-volt circuit may need an electrician if the existing circuit is unsuitable; a new circuit can cost about $300-$1,200, depending on distance and access. A gas range may need a properly sized gas line and shutoff, often $250-$1,000 when a short, accessible connection is sufficient. Long runs, panel upgrades, or concealed work can exceed those ranges.
Model availability and finish can affect the appliance quote by several hundred dollars or more. A dealer’s current stock, delivery window, included accessories, and warranty terms should be compared alongside the sticker price. The lowest advertised number may not include the same installation scope or product configuration as another bid.
Built-In Wall Oven or 48-Inch Viking Range?
A wall oven is often the more direct comparison when replacing an existing double wall oven. Its appliance price is generally lower than a large professional-style range, but it depends on existing cabinets and a compatible electrical connection. A range packages oven capacity with burners or another cooktop configuration, so it can replace multiple cooking appliances but may trigger broader kitchen work.
| Buying scenario | Appliance price | Typical installed budget | Price advantage |
|---|---|---|---|
| Replace a matching double wall oven | $10,000-$16,000 | $10,800-$18,000 | Reuse cabinet opening and circuit |
| Install a new double wall oven opening | $10,000-$16,000 | $12,000-$21,000 | Limited if cabinets need rebuilding |
| Replace an existing 48-inch range | $15,000-$25,000 | $16,000-$28,000 | Reuse fuel connection and footprint |
| Convert a smaller range space to 48 inches | $15,000-$25,000 | $18,000-$35,000+ | Low only when surrounding cabinetry fits |
The cheaper choice depends on whether the kitchen already matches the appliance dimensions. A wall oven can be less expensive when its cabinet and circuit are ready. A 48-inch range can be a more complete replacement where a cooktop and oven are both being upgraded, but adding a larger range solely to obtain two ovens may bring unnecessary cabinetry and connection costs.
Installation Hours, Access, and Kitchen Preparation
A simple wall-oven swap can take about 2-4 hours once the appliance is on site, assuming the cabinet opening and wiring are compatible. A range replacement commonly takes 2-5 hours for delivery positioning, leveling, and connection checks. These estimates exclude separate electrical, plumbing, or cabinet work and may increase when stairs, narrow hallways, or a long carry complicate access.
Preparation reduces installation surprises more reliably than assuming a basic hookup will work. Before ordering, measure the cabinet cutout, appliance depth, doorway widths, and the route from the delivery vehicle to the kitchen. Have the installer verify voltage, circuit capacity, outlet position, gas-line location, and shutoff access against the specific model’s requirements.
Installation packages can range from about $500-$1,500 for routine work, while multiple trades or difficult access can bring labor and site preparation to $2,000-$5,000. Some dealers charge a delivery or inspection fee of $75-$200 if the crew cannot complete the installation because connections or dimensions are unsuitable. Ask whether the fee is credited toward a return visit.
Delivery, Removal, and Permit Charges to Check
Delivery for a heavy premium oven or range may cost $100-$400, with extra charges for stairs, extended distance, or a difficult carry. Old-appliance removal and disposal commonly add $50-$200, although a dealer may include them in a delivery package. Confirm that removal covers disconnection, not just hauling, and ask whether local disposal or recycling fees are separate.
Electrical or gas work can require a permit or inspection under local rules, especially for a new circuit, relocated connection, or substantial alteration. Permit charges vary widely, often around $50-$300 for straightforward work, and an electrician or plumber may charge separately to obtain it. A like-for-like appliance swap may not require the same approvals, but local requirements should be checked before work begins.
Request a quote that states who handles permits, inspections, and code-related corrections. If a panel, circuit, gas shutoff, or ventilation setup needs upgrading, ask the contractor to price that work separately from the appliance. Separate line items help identify whether a high total reflects the Viking unit, necessary safety work, or optional remodeling.
Viking Double Oven Prices in High-Cost and Rural Markets
Prices can vary by location because labor rates, dealer competition, delivery distance, and contractor availability differ. In major coastal metros, installation and trade work may be about 15%-30% above a national planning estimate. Smaller cities and suburban markets may land near the middle of the ranges, while rural delivery or limited specialist availability can add 10%-25% to service charges.
These differences do not necessarily change the manufacturer’s appliance price by the same percentage. Dealer discounts, local inventory, freight, and sales tax can make two appliance quotes differ even when the model number is identical. Compare the pre-tax appliance price separately from installation and delivery to see what is driving the gap.
For a fair regional comparison, request at least two itemized quotes for the same model and installation scope. Ask each dealer to confirm delivery timing, included haul-away, connection work, warranty coverage, and whether the price assumes existing cabinetry and utilities are ready. Assumptions: Local labor and delivery charges may vary; regional percentages are planning estimates, not guaranteed market rates.
How to Lower a Viking Double Oven Quote
The strongest savings usually come from avoiding unnecessary kitchen changes and comparing equivalent bids. Choose the exact appliance type and model before requesting estimates, then provide measurements and photos of the opening, connections, and delivery route. That information helps contractors identify extra work before scheduling and reduces the risk of a failed delivery or second visit.
Keep the existing footprint when the cabinet and connection are serviceable. For a wall oven, confirm whether the present opening can accept the selected model before authorizing cabinet alterations. For a range, avoid expanding from a smaller width unless the additional cooking area is worth the cost of counter or cabinet changes. A small modification to trim or filler panels may cost less than rebuilding a full cabinet run.
Compare at least three written quotes with the same model number, delivery, installation, disposal, and connection scope. One bid may be lower because it excludes an electrician, permit, or haul-away. Ask whether a dealer has a stock unit or scheduled promotion, but weigh any discount against delivery time and the exact warranty terms.
Do not skip required electrical or gas work to reduce the initial bill. Instead, ask a licensed contractor to distinguish code-required work from optional upgrades and to quote each separately. If the existing oven is repairable, obtain a diagnostic estimate before replacing it; a repair can cost far less, though a major control, heating, or electronic repair may not be economical on an aging unit.
Finally, confirm the total out-the-door amount, including sales tax, delivery, installation, removal, permits, and cabinet work. A practical budget should include a 10%-15% reserve for concealed conditions when the existing wiring, fuel connection, or cabinet construction has not been inspected. This buffer is especially useful when converting a kitchen to a different width or appliance type.