Prices for Whirlpool spare parts vary by part type, model, and vendor. This price list covers typical cost ranges and helps buyers estimate the total cost of replacement parts and related services for residential Whirlpool appliances. The focus is on cost, with practical low, average, and high figures and per-unit details. Cost factors include part kind, model compatibility, shipping, and optional warranties.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Water Inlet Valve (Whirlpool refrigerators) | $16 | $28 | $60 | Aftermarket or OEM varies |
| Ice Maker Assembly (Whirlpool) | $45 | $85 | $180 | Includes mold and motor in some kits |
| Water Filter Kit (Whirlpool branded) | $20 | $30 | $60 | Shop for model compatibility |
| Door Seal / Gasket (Refrigerator) | $18 | $40 | $90 | Depends on door type |
| Drum Belt (Washer) – Whirlpool | $8 | $14 | $28 | Depends on model |
| Drum Support Roller (Washer) | $12 | $22 | $50 | Kit may include bearings |
| Igniter Assembly (Gas Dryer) | $25 | $40 | $90 | OEM vs aftermarket |
| Thermostat (Dryer/Washer) | $10 | $20 | $55 | Control range varies |
Assumptions: Midwest labor rates, standard replacement parts, standard access, and typical consumer models within the Whirlpool family.
Common Whirlpool Part Price Ranges by Component Type
Buyers usually pay a mix of parts and occasional service fees when replacing Whirlpool components. This section breaks down typical parts into categories with total price ranges and per-unit figures. Assumptions: OEM parts tend to cost more than aftermarket, and model compatibility affects pricing.
| Part Type | Low | Average | High | Per-Unit Notes |
|---|---|---|---|---|
| Water system components (valves, filters) | $16 | $28 | $60 | Per valve or kit |
| Ice and water assembly | $45 | $85 | $180 | Model-dependent |
| Door gaskets and seals | $18 | $40 | $90 | Per door edge |
| Dryer heat and ignition parts | $25 | $40 | $90 | Includes igniter or thermostat |
| Washer drive components | $20 | $35 | $80 | Belt, rollers, bearings |
Major Cost Components in Whirlpool Spare Parts Quotes
A typical Whirlpool parts quote lists four to six cost areas that compose the total price. The following table shows common line items buyers should expect and how they influence the final bill. Assumptions: standard packaging, domestic shipping, no rush fees unless noted.
| Cost Component | Typical Range | Impact on Total | Notes | Example |
|---|---|---|---|---|
| Parts (OEM vs aftermarket) | $10–$180 | Primary driver | OEM higher, compatibility critical | Ice maker module vs generic valve |
| Labor (installation) | $60–$120 | Moderate | Hourly or flat; varies by appliance | Washer belt replacement |
| Shipping | $6–$25 | Low to moderate | Domestic standard vs expedited | overnight adds cost |
| Diagnostics/Inspection | $25–$75 | Low to moderate | Non-warranty assessment | Leak diagnosis |
| Taxes/Fees | $0–$15 | Low | State/local charges | Sales tax where applicable |
Variables That Drive Whirlpool Spare Parts Pricing
Model compatibility and part type are the strongest variables in quotes. Two numeric thresholds commonly shift price bands: part complexity (number of moving parts or integrated electronics) and model generation (older models use harder-to-find components). Assumptions: mid-range models 5–10 years old, standard 120V or 240V appliances.
Practical Ways to Lower Whirlpool Spare Parts Costs
Cost control comes from scope management and smart buying choices. Consider these concrete steps to reduce total spending. Assumptions: you’re not altering the appliance’s fundamental function, just replacing faulty parts.
Regional Variations in Whirlpool Spare Parts Pricing
Prices can shift by region due to supply, demand, and delivery costs. The price list shows typical ranges you may see in the Northeast, Midwest, South, and West. Assumptions: standard domestic shipping and common shipping speeds.
Per-Unit Costs for Popular Whirlpool Replacement Parts
Floating per-unit figures help compare quotes from multiple vendors. The following table gives per-unit costs and typical quantities replaced per job. Assumptions: single appliance per project, standard replacement kits.
| Part | Unit | Low | Average | High | Notes |
|---|---|---|---|---|---|
| Water inlet valve | Each | $16 | $28 | $60 | Model-specific dimensions |
| Ice maker assembly | Set | $45 | $85 | $180 | Includes mold and motor |
| Door gasket | Each door | $18 | $40 | $90 | Door type dependent |
| Drive belt | Each | $8 | $14 | $28 | Washer models |
Warranties affect long-term cost and peace of mind. OEM parts often come with longer warranties but higher upfront price. Assumptions: standard one-year warranty on non-electrical parts, longer terms on some OEM bundles.
How Labor Time Shapes Overall Whirlpool Part Quotes
Labor hours convert to dollars via local rates, often aligning with the part’s difficulty. A level of complexity from 1 to 3 hours is common for a single replacement. Assumptions: standard home access, typical skill level of a DIY-friendly technician.
Timing and Availability: When Prices Move Fast
Prices can shift with seasonality and supply constraints. Expect tighter availability and higher quotes during peak home improvement months. Assumptions: typical residential demand patterns, no emergency freight applied.
Three Real-World Quote Scenarios for Whirlpool Spare Parts
Concrete examples help buyers benchmark quotes. Sample scenarios show model, parts, labor, and totals to aid comparison. Assumptions: standard model compatibility, domestic shipping, no rush fees unless stated.
-
Scenario A: Whirlpool refrigerator ice maker failure. Parts: ice maker assembly ($85), water line valve ($28). Labor: 1.0 hour at $100/hr. Shipping: $12. Total: $85+$28+$100+$12 = $225.
-
Scenario B: Washer belt and roller kit for a 7-year-old model. Parts: belt ($14), two rollers ($22 each). Labor: 1.5 hours at $95/hr. Shipping: $8. Total: $14+$44+$143+$8 = $209.
-
Scenario C: Dryer thermistor and igniter on a midrange unit. Parts: igniter ($40) and thermistor ($20). Labor: 2 hours at $110/hr. Shipping: $15. Total: $60+$40+$220+$15 = $335.
Assumptions: regional labor rates and typical parts availability align with midwestern market norms.